Video

Yes pas 3

Well you can't tell me that and not explain what the problem is?

Help me send me your mail

Help

Water has entered the LCD and the control buttons.

@@shawnyrick The scooter doesn’t accelerate anymore

I love the new upgraded ones much better. They are pretty puncture resistant as well

@@shawnyrick thanks for reply!

Thanks bro

Thanks.... yes let me know you should definitely see a diference

Yes the syringe will help move the fluid back and forth to make sure there is no more air bubbles

Local hardware store

If you have everything hooked up and both screw caps off and the syringe down by the brake calipers and the cup up by the break lever you should have no issues pushing the oil through the lines... If you got pressure then you didn't unscrew one of the screw caps or something else.

You have to open up the deck they are inside. It's most likely bad battery cells

Yes the method is the same for all scooters that have Mineral Oil Hydraulic brakes

Nice glad it worked. It does take some practice and patience to get it just right

You must of really been running the wheel a lot in order for that to happen, sometimes it isn't perfect but it is best to evenly tighten down both screws at the same time. And if that doesn't work then sometimes holding the caliper and adjusting it slightly with your hands as you look down on to the rotor while making sure it's even when tightening down the screws works also. You have to make sure it's even, because you are right, it will move the caliper a bit if you only tighten one side down at a time. I've never warped a rotor at all by using this method. And it's the same method on all scooters. I'm at least glad you were able to get it to work.

www.amazon.com/gp/aw/d/B0CX1WVYH8?psc=1&ref=ppx_pop_mob_b_asin_title

@@shawnyrick u should make an installation guide for a 2.0

I actually put them on my 2.0 the same way for the pro and I will do up a video soon as I was waiting on one other really cool thing to come in before I did it, so that way I had my recent cool gear, and add ons to show at once

@@shawnyrick I have a reccomendation, you should try turn signals and/or horn on the pro and 2.0

I'm still working out some ideas for a horn... I haven't been to excited about the escooter or bicycle ones but yea I'm definitely looking into it.

No you shouldn't need to buy new pads, unless the pads are majority warn down. But it's always a good idea to have them extra on hand

@@shawnyrick oh really ok thanks a lot for that tip bro i appreciate it so much. idk what i'd do without you man 😅

Thanks bro! I appreciate it!

I got a very bright neon backpack that the 360 did not show up! It is also used as my signal light. The LED'S are highly visible and I always keep the front and rear head lights on even during the day for visibility for others. But no thanks sounds like to much of a chore there just to ride haha

No I don't think there is yet.

After the modifications I made to the tire to get it to fit, it ended up being a lot lighter. I'm not sure how it rides long distance yet and or in the rain but as soon as I can get out on it I'll let you know. When I tested it though it wasn't bumpy.

You can order directly on the Varla website

@@shawnyrick how long is delivery

The error code 6 means low voltage so if it's not your fuses then 9 time out of ten there is something wrong with your battery.

For which scooter?

for varla eagle one pro sir just the calipers mine is leaking any replacement sir

The nutt MTB E-bike Electric Scooter Right hand 160 rear on Ali-express. The nutt MTB E-bike Electric Scooter left hand 160 front on Ali-express. All you have to do is search that it's from the QIYUE Bike store on there. Those are the exact and best upgrade for you to do, once you put those on you won't have an issue with them leaking. They are solid.. If you need help on how to bleed and do the breaks search my videos I have plenty that tell you how.

I don't think so! It's one of the other as I thought the same thing. But I have a wife deck coming so I'll let you know

The display can be bad possibly but what I would do is, prop it up on a crate and place the scooter in cruise control wheels off the ground and let it run down to 42 volts, no less, then plug the battery in let it charge and balance again all the way and then see if the display matches after that.

@shawnyrick I'm pretty sure they sent me wrong display being as it's p settings are set to 60v (pro model) and my scooter is the v2.0 52v The new display won't let me change the values for the voltage

Oh okay yea! That's the problem

@@pixelskyphotography2556Im having the same problem as they dont sell a replacement screen for the V2.0

Why did you need to replace your V2 Display?

Most likely a cell in the battery pack is bad get a hold of varla and see if they can send you a new battery under warranty

It shouldn't. The battery will fluctuate when you ride it depending on the power it needs to get you up and down hills ... But I would still never push it even when it fluctuates to 42... I never let it get that low myself while riding

Yes that's why I wanted to get this video out as soon as possible

Yes, the rack is super nice... I actually have enjoyed strapping my signal backpack there, while riding recently, which has made the turn signal more visible to on coming traffic.

@@shawnyrick oh that is a good use case! Or maybe some of those wireless signals attached to a milk crate strapped to the rack or similar as a more fixed solution

Yea I only wanted to add the seat to try the experience out of how it feels versus standing on it. The experience is a lot different. It is a little goofy but I can see why certain people would like to have one, especially with the extended tow bar this one comes with when you add the rack.

@@shawnyrick I just don’t like the foot position, it makes you support yourself with your feet more than actually sitting if that makes sense. But I do see the appeal, I just prefer purpose built seated scooters I guess haha

I think it's worth it yes! Unless your wanting to upgrade the scooter to a newer one

@@shawnyrick ok! My scooter is already pretty beat up lol so I might upgrade then

No unfortunately

Thanks man

Thanks bro appreciate the support

Yea its sweet sounded

Its how nutt designs their brakes. They cap the lines and fill them ahead of time. Thats why they come the way they do. They still may need a little but typically if you do it right they dont

Your welcome

How about you smile more pn Tiktok lol