Video

Great vid with a great smile, cnt wait for mines to come through the post!!

The info that I needed. Thanks.

That dern hat is not your friend, huh? 😊😊

35+ yrs just use a brush.

For future reference, even filming this video at HALF the distance from the unit that you're currently at would have helped immensely. I can barely see any details that I could just be observing myself.

Don't waste money and time. Just buy a decent brush.

Thanks, trying to make square pipe table, cannot the fourth pipe to fit in keep get more parts to get to work.

Thanks for emphasizing the need to constantly measure and use a level. I made a small table and just screwed it together thinking it would only be a couple millimetres out of level. And there was a half inch wobble in it. The legs will be completely different lengths if you don't measure as you go.

Thank you! With $2.74 spent and 5 minutes, I was able to fix my toilet that's been slow leaking for 10 years. I've looked it up before, but I never found the same setup until your video.

Please do we have this tool available in Ghana?

Wanted to put this on our bedroom ,but not sure as I don't want any one hearing me and the Mrs going at it 😅has any one done it this

How sturdy is this? I'm thinking about doing a desk like this but it needs to support 2 large monitors on arms and 2 laptops. 65in x 25 butcher block top.

Thank you!

It's a lot quicker if you just lightly roll the paint on the applicator pad instead of dipping it in the paint pan.

Where do you put your shampoos and products?

Has anything ever loosened after time? Did it ever become wablly?

Does the pot filler flow fast enough to still get a hot bath?

Cocking. This word amazes me. I’ve never seen a tube of that in a hardware store. I have seen cauLking. But never cocking.

Thank you

Pro tip for this tool , apply with brush either on the wall or directly

What is the height from the floor to the top of the butcher block table?

Just a suggestion. How about recording while you work on the project? 🤷🏽‍♂️

The better way is to paint in a U shape every time you touch the wall. I'm only painting that way for 10 years now and it always done real good job. Try it! Easy and fast! Let me explain: 1. Dip the Shure-line pad just a little down the tray; 2. Rub the edge of the tray to remove excess (this will produce uniformity to the pad); 3. Do not apply paint directly to the border; 4. Instead, apply further from the border; 5. Slide to the curb and slide 4 feet along it. 6. To remove the pad, slide away from the edge. This results in a U shape, where application and removal is done away from the edge. This prevents staining from application/removal. Have a easy and fast outline painting!

Nice quick helpful information - thanks! "Let's jump in and I'll show you how to do it!" - exactly what I need to hear when it's toilet repair time.

Great job using pot filler!

Price? Pros? Cons? Recommend? Bueno? No bueno?

I actually use my brush to coat the pad. My Father used to have me use it that way back when I was a young teenager in the 1980's...That way he could trust me not to screw up!! I still do it that way.Just a thought.

I tried this tool recently and I didn’t like it all. I don’t like how it drags across the wall and can still slip and touch the ceiling. I just taped it everything then used the roller as far as it would go in the corner and then did the small edge with a brush.

The pot-filler idea was seriously brilliant!

For me the number one thing is to keep it off the wheels. I do everything like you do except I put more paint on it.

Looks like it still leavees a little gap between the edger and the wall though. How do you get around that?

How much shur line paint edger

thanks

Should the walls be painted before laying the flooring?

How do you do this when it’s on concrete

Just get on with it.

A lot of painters don't like,I found it to speed up the job in my opinion ...nice video

Bro, you don't need the edger for corners. You need an edger for EDGES, ex: door trim, molding trims....

Does it always leave a small gap?

thanks so much for sharing this video you just solved a big problem in my house!!!

Use your brush to load the pad brushing off the edge. Don’t dip it. You need a brush anyway to get the inside corners. Don’t try to go too far with a load or it will apply too thinly. I use the tilted front edge to swipe down the ridge that tends to squeeze out of the back edge especially if rolling the field is lagging behind.

If u ain’t got a steady hand and ur using a dark colour to a white ceiling then cutting in can b a nightmare so if this tools solves that problem what’s not to like

can you use a quartz top instead of wood?

EXTREMELY helpful video! I needed ALL of this info. Thx 4 sharing:)

Super

Thankyou especially the part for putting seal in first groove. It did it wrong the first time.

what brand potfiller did you use?

I just finished using this tool and it works. Pretty much take your time. It definitely lets you skip prepping. I washed it after use to save it for the next home project.

Can i follow all the materials with 200cm x 60cm table??

So the obvious line where it doesn’t reach the actual edge of the wall, I’m guessing you went back in and used a brush to fix that.