Video

@@YukonHawk1 Thanks, the CC2s are still going strong with lots of tread left! I only have 17K miles on them which is still a long ways to go from the 60K they're warrantied for.

@@vietbubbletea That's great to hear.

@@bobborsit5985 Go Hawks! It was a beautiful Seafair weekend, I hope you enjoyed all the festivities!

Thanks, I couldnt think of the words! Alignment pin sounds a lot better than "thingything"! 😅

@@johanvanhullebusch980 Try going into Android Auto settings and enabling developer mode by clicking on the 3 elipisis to see if that works.

@@vietbubbletea I don't have a app of android auto. I can change a couple of things in android auto. By going in to my settings from phone.tbutt don't have app . Like I already have seen some people have on youtupe

@@johanvanhullebusch980 If you are using an Android device, AA doesn't have an app icon. You access AA by going to settings and scroll to 'Connected Devices' to find AA.

Yes, it can record continuously if connected to constant power but you would need to ask for the fuse box kit since the piggyback harness thats connected to the rear view mirror only turns on when the car is on.

The raw files are definitely sharp with legible license plate. I think the video resolution was reduced when compressed on CZcams that may contribute to the zoomed in image not looking clean.

amzn.to/4d3rNIK

Glad you figured it out, you'll love them at night!

My button has worked fine since installation and I have no complaints. I prefer the simple look and would stay with the version I have since it illuminates around the button itself which helps me locate the button better at night. The kit should come with a tool to pry the OEM button out so maybe I was unfortunate to not get one. It's purely an aesthetic mod and only requires the removal of the plastic button, you don't need to mess with the light or coil behind the FOB receiver. I hope that helps!

Yeah, Amazon also says it won't fit my 2021. You'll notice that they only have a vehicle selection for the gas version which this oil filter wrench won't fit but the Hybrid has a different smaller oil filter which will fit perfectly.

@@sasha85ful I did not and don't plan to for safety reasons if the airbag is activated. I don't want any debris to fly at my face. If you're looking to change the emblem color to black, I would recommend Hyperdipping it.

@@sasha85ful Must be slightly different wiring that is incompatible with the aftermarket harness? I know there are other products that don't work on XSE because of this reason.

@@vietbubbleteaI watched again. You connected only one plug to it. Second where?

@@sasha85ful Yes, there is only one plug but it's possible that the wiring harness has a different pattern in the XSE. You can ask CarTrimHome directly for more XSE customers experience as to why it's not compatible.

@@vietbubbletea I understood. In your video you connected small plug in it. Where big plug to connect?

@@sasha85ful Cigarette lighter socket in center console

To monitor my battery voltage

@@draymanbakour88 The brand is Pittsburgh, I got it from Harborfreight when it was on sale. www.harborfreight.com/6500-lb-capacity-portable-ramp-set-2-piece-63956.html

Oh, that black box? That's the controller for my LED foot well lights, you can't see the wires but it's tucked into the center console. You had me searching the whole screen! lol

What key fob? You should have received two from the dealership. I'm not sure I understand your question.

Download the instructions I've linked in the video description and follow Fig. 5-4 and 5-5 to see where the four bolts on the bottom thread in. You'll need a 10mm deep socket and 6" extension to tighten those bolts I from the bottom.

Not sure, they must have changed some of the hardware in the kit but as long as the mounting point doesn't budge then you're okay.

Yeah, it was actually that rectangler washer that you used to fill the gap between the hood bracket and the hood. Also, is there any special procedure to remove the struts other than just pull them out of the ball socket? I accidentally put one in backwards so I just kinda pried it off, but not sure of that was ok. Great channel, I'm enjoying your videos, already subscribed

@@StephenHeuman Yup, Just pry the metal c-clamp out with a flat head and you can remove the strut with ease. It also wouldn't hurt to email the seller if you feel the bolts are missing to see if they'll send you a replacement set. Thanks for the support!

OpenRoad Toyota in Richmond, BC. Call in advance to confirm they have it in stock or have them order it.

I hope so, maybe they can install them to all the Grand Highlanders during the recall... 😂

@@vietbubbletea The Rav 8. I don't like the grill.

None that I know of at this time. Some members have inquiried with some of the popular companies that make catch cans but there's just not enough demand to prioritize one for Highlanders. If you check out the ToyotaNation forums, people have made the own DYI versions using universal kits.

I have a set sitting in my garage that I plan to install soon!

Yup, can't get any more Vietnamese with my name! 😅

@@vietbubbletea e cũng có highlander xse 2022,kênh a hay quá,sắp tới e sẽ upgrade những món đồ trên kênh a đó,e ở mỹ thì mua nhưng phụ kiện đó có dễ không ạ?

@thanho4433 Thank you, I'm not good at reading Vietnamese though. 😅 Yes, the products I review on my channel are easy to purchase in the US mainly through CarTrimHome, Amazon, AliExpress or ebay.

Tks so much

Use discount code 7PZK for an additional 7% off! cartrimhome.com/Car-LED-Central-Cup-Holder-Ambient-Lights-For-Toyota-Highlander-2020-2024?tracking=ThanhTran

I hope the video makes the installation process easier for you!

I'm on the west coast in Seattle, Washington. What step did you have questions about?