MOOSUN Universal Center Console/Benchseat Review(Fits 2020-2024 Toyota Highlander w/ Captain Chairs)
Vložit
- čas přidán 5. 08. 2024
- Hi fam,
Today I will be unboxing and reviewing the MOOSUN Universal Center Console/benchseat product! If you have a 4th Generation Toyota Highlander (2020-2024) with Captain chairs in the 2nd row and looking to upgrade from the OEM cup holders located on the floor, this product may be for you!
This product fits tight and snug in between the captains chairs and offers two elevated cup holders and a storage compartment in the center. It also serves as a bench seat.
If you'd like to purchase this product, feel free to use the Amazon link below to support my channel, I do receive a small commission at no cost to you.
amzn.to/4b1gZub
My car: 2021 Toyota Highlander Platinum Hybrid AWD
Join our growing Facebook 4th Gen Toyota Highlander DIY/MOD community!
/ 395605678974796
Inquiries: vietbubbletea1978@gmail.com
Buy me a coffee! Cashapp: $vietbubbletea
Thanh Tran
00:00 Unboxing
04:57 Close-Up Review
05:50 Installation - Auta a dopravní prostředky
Looking forward to your oil change vid, though I’ll be done with my first oil change by then. Im close to finishing the engine break-in period and approaching 1000mi on my Highlander, which is when I’ll do the oil change.
I did the same at 1K as well, I also used a Votex magnetic oil drain bolt to pick up any potential metal fragments that settle at the bottom of the oil pan.
Awesome to see you again! Thanks for the review! Do the seats slide easily with that so snug? How have your tires held up?
Thanks Paul! The captains chairs can still slide easily but the center console will shift back and forth if the seats are adjusted. As for the CC2s, still have plenty of tread even though I've only put 16K miles on it.
@@vietbubbletea You're welcome. Thank you for the update on your tires. I'm still rolling with my oem BF Goodrich tires. They have 72k on them and still have another 3k to go before I spring for the Cross climates.
COOL
Thanks for the video! Is it possible to screw it down to the floor?
P.S. I would like also to say thank you for Michelin CC2 tires. They are awesome!
Thank you for the kinds words! Screwing the center console to the floor would require fabrication as there aren't any solid mounting points on the bottom. There is a slot embroidered to the fabric on the bottom to loop a strap through but the fit is already very snug that I don't think it's required.
@@vietbubbletea Thanks for the answer.
How comfortable is it to sit? I made something similar seat with some 2x4 and memory foam
How can i get one of these?
amzn.to/4d3rNIK