Video

Maintenance Mode is a better solution IMO. This way, you are not messing with the harness.

It seems that airfilter is upside down. You should have pleat side into the airflow for more surface area(look at how the OE filter had this orientation), the mesh is the back side and should be the part that air comes out of. The filter should also have a directional arrow to indicate airflow path.

You can get header exhausts ecu flash ( supercharger) which i recommend to transform it also turbo which i dint recommend all from ozjimny australia. Or bullet cars queensland do it too. Which would be better because they are not just on line. Dont leave them stock they boring stock

16:31 guy in the car in the background. Pick me a winner 😂

Я вибачаюсь, у вас красивий джимни, красивие колесние диски. Я дивлюся и в мене настрій підеймается. Україна. Джимни в мене мрія.

Хочу Джимни. Україна.

🎉🎉🎉

just what I need perfect, thank you 🙏

dhould have used rivnuts easy take off if ness. should have taken the wheel off.

I highly doubt this has any effect on the performance cause the diameter of the tubes and throttle body the air passes through are still the same. Maybee it sounds different than stock what's tricks you into thinking it's faster. Same effect as a sports louder exhaust. Also I'm pretty sure the filter mat is the wrong way around. The metal mesh should be the clean side of the filter. The mesh will support the fabric while air is rushing through.

having similar problems.. what were they thinking at suzuki. I am using 4low in many situations now because of this

any idea what the name of the solution is? also what happened to the channel? it's great!!!

what happened to the channel! great videos but nothing anymore.

great job big guy

Top notch video. High quality and a solid option. Bummer it’s such a mission. I have paper clip living above my gas pedal.

Hey bud big thanks for posting this video made the installation that little bit easier for me 🤙

Why woukdnt you just wack a switch on the original jump loop plug ?

Greetings from Mexico! Nice Jimny... soon ill post some videos of my Jimny here

It this really a problem though? When I have my Jimny on the beach it runs fine at any speed once I get it on the hard stuff, and in the soft stuff I'm going less than 30km because I don't want to roll or otherwise break my car. For the really soft stuff such as getting on or off the beach, I'm in low range anyway. I was worried that I'd have to do either this or the ESC maintenance mode hack but at this point I'm not sure I see the need. I don't know, maybe some people drive their Jimny at high speed in really soft sand but I think the wheel base is way too short to be safe or comfortable.

Is ur jimny manual or auto transmission?

Here’s another way of doing it. czcams.com/video/BiezSXsJDGA/video.html I’ve done it in my Jimny and it works like a charm. However, as I have a different (more simple) dashboard my ESC disabling procedure is slightly different. I disable RSC before starting the engine, not after.

how did you put the winch sharp corner protector on the bumper?

Can you drift with it?

Your reaction made me want this, but sadly I cant find a UK seller. The aftermarket sene her is great so I sure there is an equivalent. Never wanted a snorkel as dust is not the problem here! however, Jimny's are slow the world over! Thanks for the Video

rewatched for about the 10th time lol....nice vid, what plates did you need to fit the 4500 lb winch? Did they come with it or did you need to get them elsewhere? If so where? Thanks in advance.

Хочу джимни. Україна.

Can't you just put a switch in the green cable ?

I got an ECU flash on mine. Made a huge difference, guessing weighing f.all really helps with that. Any little gain is significant

Hi! where did you get front bullbar? thanks!

I like the white rims mate, what size and brand are they?

Very cool, love the car and you guys sure pack a stack in the Jimny.

I hate it. Its bs that you cant turn it off. Makes driving in snow bs too, almost made me go into a ditch.

Nice vid. Question, did stainless pipe come with the kit or did you specify it separately? Mine has turned up without it

Good idea. The only thing is to find a way for the wires to go inside to the dash panel.

Hii I really love this Vehicle and watch the video over and over again. Fantastic

What car model is that air filter from?

Can I ask now you’ve been driving it a while would you consider adding the Torquit exhaust and would you consider remapping the ECU with Torqit?

What's the gauge on your windscreen and what is the display monitoring. Looks neat. Thanks for the Vlog

so the realy cheap way is just pull out the fuse before off roading

If you lower your tyre pressure for sand, doesn't you tpms go crazy ?

So young bro

Yes not a good thing to override this way, better to loop the black/tan wire at the acceleration pedal. It’s a permanent fix that doesn’t record isolation, once looped at the pedal it just a simple 8 second hold of the switch every time you want to disengage the traction control. I understand why you went to the source but definitely a no-no, easier permanent way to on/off the traction issue.

Gday boss. A year later, how is your mod going?

Get it supercharged

Well done Bigguy, I can see how excited you are, really happy for you mate, great vid to

Better solution here czcams.com/video/BiezSXsJDGA/video.html

Awesome 👍

This channel deserves more views

Hi mate. How’s the ride on a daily drive (empty) with that GVM upgrade?

Hi mate, just wondering what front bar that is and where did you get it from. Thanks in advance. Keep up the good work cheers