![More than Purity](/img/default-banner.jpg)
- 56
- 53 792
More than Purity
Malaysia
Registrace 15. 02. 2016
Our CZcams channel focuses mainly on emerging technologies utilized for separating pollutants from contaminated sources through diverse separation processes (particularly membrane technologies).
Additionally, it offers current insights into the detrimental effects of pollutants on the environment and human health.
Moreover, the channel showcases characterization instruments from different manufacturers, catering to various sample analyses.
From time to time, we also bring attention to significant days (e.g. World Water Day) and events such as conferences, workshops and seminars in the field of science and technology.
If you are keen on contributing your video to our channel, please feel free to reach out to us. We welcome your valuable input!
Additionally, it offers current insights into the detrimental effects of pollutants on the environment and human health.
Moreover, the channel showcases characterization instruments from different manufacturers, catering to various sample analyses.
From time to time, we also bring attention to significant days (e.g. World Water Day) and events such as conferences, workshops and seminars in the field of science and technology.
If you are keen on contributing your video to our channel, please feel free to reach out to us. We welcome your valuable input!
Rapid Detection of Microplastics (MPs) in Water Samples
In this video, we demonstrate a rapid and precise detection of microplastics in water samples using the Agilent 8700 LDIR chemical imaging system. This emerging technique greatly minimizes human error, reducing the chances of misinterpreting microplastics in water samples and enhancing confidence in the accuracy of the results. #microplastics #LDIR #Agilent #waterquality #watersafety
zhlédnutí: 54
Video
2nd International Conference on Sustainable Engineering & Advanced Technology (ICSEAT), 5-6 Aug 2024
zhlédnutí 95Před 21 dnem
5 - 6 August 2024 | Connexion Conference & Event Centre, KLThe International Conference on Sustainable Engineering & Advanced Technology (ICSEAT 2024, www.icseat2024.com/) is designed to facilitate the exchange of knowledge and ideas among engineers and researchers. Through presentations and publications, the conference aimed to bridge the gap between theoretical research and practical applicat...
How to Perform Analysis with SURPASS3?
zhlédnutí 28Před měsícem
In this video, three PhD students-En Qi, Wan Yi and Wei Ann-demonstrate how to use SURPASS 3 to analyze a flat membrane surface. The SurPASS 3 offers fully automated zeta potential analysis of macroscopic solids under real-life conditions. As electrokinetic analyzers, they utilize the classic streaming potential and streaming current method for direct surface zeta potential analysis. The zeta p...
A Visit to Singapore International Water Week (SIWW) (21 Jun 2024)
zhlédnutí 54Před měsícem
The 10th edition of SIWW was held from 18 to 22 June 2024 at the Sands Expo and Convention Centre in Singapore, alongside CleanEnviro Summit Singapore.
STEMFINITY in ME CARNIVAL (MRSM Johor Bahru, 9 June 2024)
zhlédnutí 40Před 2 měsíci
Aasion Sdn Bhd (aasion.net/), in collaboration with Tunku Abdul Rahman University of Management and Technology (TARUMT) and Universiti Teknologi Malaysia (UTM), participated in the STEMFINITY IN ME CARNIVAL 2024. The event was held at Maktab Rendah Sains MARA (MRSM) Johor Bahru on June 9, 2024. A range of engaging activities were crafted to ignite students' interest in science, technology, engi...
Simple Tools for Flat Sheet Membrane Casting
zhlédnutí 297Před 3 měsíci
Anyone can create a flat sheet membrane without the need for an expensive casting machine. In this tutorial, we demonstrate a straightforward method for making flat sheet membranes using just a glass plate, glass rod and cloth tape. We hope you find the process enjoyable as you craft your own membranes. This experiment was conducted by PhD student Lee Wei Ann.
What is the Cost for Article Processing Charge (APC)? (As of March 2024)
zhlédnutí 30Před 4 měsíci
Open access is a publishing framework for academic communication that provides research information to readers without charge, in contrast to the conventional subscription model where readers gain access to scholarly content through paid subscriptions, often facilitated by libraries. One of the most important advantages of open access is that it increases the visibility and reuse of academic re...
World Water Day (22 March 2024) - Reminder about using water wisely
zhlédnutí 522Před 5 měsíci
In conjunction with the World Water Day on March 22, we are conducting survey/interviews with both the public and experts to explore strategies for minimizing our daily water consumption to ensure a sustainable future. Word Water Day is an annual United Nations observance day since 1993. The day highlights the importance of fresh water and is used to advocate for the sustainable management of f...
i-Smart Oil Water Separation Technology Introduced by Dr Serge
zhlédnutí 104Před 5 měsíci
We extend our gratitude to Fingate Technologies for granting us permission to showcase their video on an innovative solution for managing oily wastewater streams. This breakthrough technology facilitates enhanced and safer oil-water separation processes. To explore further disruptive technologies developed by Fingate Technologies, visit their CZcams Channel: www.youtube.com/@FingateTechnologies...
Greener Approaches to the Synthesis of TFC Membrane for Potential Recovery of Saline Water
zhlédnutí 239Před 5 měsíci
This presentation was delivered online at the 2nd International Conference on Civil Engineering: Novel and Practical Achievements on March 7, 2024. This conference was organized by the Apadana Institute of Higher Education, Shiraz, Iran (www.apadana.ac.ir/). Its current president is Assoc Prof Dr Amir Mansourizadeh.
Talk on Waste Management in Malaysia by Dr. Ng Pang Soon (James)
zhlédnutí 55Před 7 měsíci
During this presentation, Dr. Ng Pang Soon (James) from Enviro Pioneer Solutions discussed his firsthand experiences as an Environmental Impact Assessment (EIA) Consultant, focusing on effective management of solid and scheduled wastes in Malaysia.
What are the consequences of the ban on using Malaysian government funds to cover APC for journals?
zhlédnutí 24Před 7 měsíci
On July 13, 2023, the Ministry of Higher Education Malaysia released an official statement prohibiting the use of government funds for publishing in three international publishers. In this presentation, we randomly selected several journals published by each publisher and examined the impacts of the ban on the number of papers published by Malaysia authors in 2023.
Mechanically robust membrane (pretreatment) for addressing effluent produced by tire pyrolysis plant
zhlédnutí 159Před 7 měsíci
In this video, we showcased the application of a mechanically robust ultrafiltration (UF) hollow fiber membrane for addressing wastewater generated by a tire pyrolysis plant. The hydrophilic UF membrane functions as a preliminary treatment step before the subsequent process, effectively eliminating a portion of pollutants that could potentially foul the following membrane process. The membrane ...
The Mind & STEM Festival 2023 at Foon Yew High School, Kulai (24 & 25 November 2023)
zhlédnutí 68Před 9 měsíci
The Mind & STEM Festival is a joint collaboration between Malaysia Mental Literacy Movement (MMLM) and Kuala Lumpur Engineering Science Fair (KLESF). The Festival was successfully organised at Chung Hua Middle School No.1 Kuching, Sarawak in 2018 and 2019. Established by Tun Dr. Ling Liong Sik, the Chancellor of Universiti Tunku Abdul Rahman (UTAR), MMLM obtained official registration under the...
Qatar University Life Sciences Symposium 2023 (QULSS 2023)
zhlédnutí 17Před 9 měsíci
Qatar University, in collaboration with Doha Expo 2023, hosted a two-day symposium focused on fostering a green desert environment by facilitating the exchange of ideas, insights, and research findings among experts, scholars, professionals, and enthusiasts. Specifically, the Qatar University Life Sciences Symposium 2023 (QULSS 2023) held on November 15-16, 2023, garnered an enthusiastic respon...
Highlights of 15th Membrane Science & Technology Conference (MST) in Phuket (7-8 September 2023)
zhlédnutí 83Před 11 měsíci
Highlights of 15th Membrane Science & Technology Conference (MST) in Phuket (7-8 September 2023)
Highlights of "Unveiling The Secrets of Materials Characterization" Seminar
zhlédnutí 78Před rokem
Highlights of "Unveiling The Secrets of Materials Characterization" Seminar
Highlights of third meeting of Malaysia Alumni of Sakura Science Association (MASSA) 22 July 2023
zhlédnutí 57Před rokem
Highlights of third meeting of Malaysia Alumni of Sakura Science Association (MASSA) 22 July 2023
Breakthroughs in Carbon-based Nanostructured Membranes by Prof Edward Nxumalo (UNISA)
zhlédnutí 141Před rokem
Breakthroughs in Carbon-based Nanostructured Membranes by Prof Edward Nxumalo (UNISA)
Household Water Treatment System (eSpring): Replacement of Cartridge Filter
zhlédnutí 3,2KPřed rokem
Household Water Treatment System (eSpring): Replacement of Cartridge Filter
Amphibious mobile solar power generator and water filtration unit - Operation (Part 2)
zhlédnutí 100Před rokem
Amphibious mobile solar power generator and water filtration unit - Operation (Part 2)
Lab-scale Oxygen Enrichment System based on Membrane Technology (Ir Chong Kok Chung, UTAR)
zhlédnutí 176Před rokem
Lab-scale Oxygen Enrichment System based on Membrane Technology (Ir Chong Kok Chung, UTAR)
Treating Local Leachate (Malaysia) using Membrane Technology
zhlédnutí 180Před rokem
Treating Local Leachate (Malaysia) using Membrane Technology
Cross Flow Membrane Filtration Cell - Design & Fabrication
zhlédnutí 340Před rokem
Cross Flow Membrane Filtration Cell - Design & Fabrication
Water Reuse and Recycling in Japan (Assist Prof Dr Haruka Takeuchi, Kyoto University)
zhlédnutí 274Před rokem
Water Reuse and Recycling in Japan (Assist Prof Dr Haruka Takeuchi, Kyoto University)
In Memory of Dr Sourirajan - Inventor of Modern Membrane who Passed Away on Feb 20, 2022
zhlédnutí 171Před rokem
In Memory of Dr Sourirajan - Inventor of Modern Membrane who Passed Away on Feb 20, 2022
please make a video on how to make nafion membrane
Thank you for the nice video. I had a few question 1) thickness of the sheet how to increased is it directly depended on time 2) Can we use MPD or OPD to get more efficiency in RO 3) can we use COF or MOF in this mixture to increase more efficiency for this sheet.
hello sir/maam, may I ask? I'm currently casting a membrane from cellulose acetate and NMP solvent, but I'm having a problem. After I cast it and then put it in a coagulation bath, my membrane sticks to the glass plate. Is there a solution that I can do to prevent the membrane from sticking to the glass plate?
You can consider using a larger coagulation bath. This might be helpful to solve your problem.
@@morethanpurity1770 i used a bigger coagulation bath, i even put a lot of distilled water in the coagulation bath and it still didn't work. is there another solution i can try to prevent the membrane from sticking to the glass plate?
czcams.com/video/y8t9vwp075g/video.html
Qué bonito
??
Hi, very usefull! One question: for TFC membranes, from which direction do you cut through the sample? First through the selective layer?
@scoutcaspers4859 It does not really matter which direction you start as the membrane is already embedded within the resin.
Good job👌👌
Fantastic!!
Hi,🎉 I recently visited your CZcams channel. There are some problems with your CZcams video so views are not increasing even though your CZcams video is good.if you want then I can help you for growth your CZcams channel. What are your future plans with this CZcams channel?
Great ! We need more content like this
good job
Doing great and continue to bring up the awareness
Thanks for raising awareness on water conservation.
Fantastic ❤
Nice sharing. Bilal from Pakistan
Can you please tell me from where we can buy this type of stainless module for hollow fiber potting?
Hello, very interesting video. I am just wondering that the feed solution looks more conductive than the draw solution, so how the water is drawing from feed to draw.
@shubhamketansharma2314 .Thank you for your interest. Actually, the feed solution is significantly less conductive than the draw solution. The highly saline draw solution creates the osmotic pressure difference which induces water to flow from the feed solution through the membrane. If the osmotic pressure of feed is higher than the draw solution, feed is not able to be drawn to draw side.
Can you please tell me how you calculate the reverse solute flux with its initial and final concentration values
Pdf
Hi, I want to buy a spinneret rig for experiments. From where, I can buy it?
You can send your request to a_trubber@hotmail.com. Thanks
How to order?
@Oka Ratnayani. You can send your request to the a_trubber@hotmail.com
Hi. can I as for your email? thank you!
You can get our contact details from the channel - www.youtube.com/@morethanpurity1770/about
czcams.com/video/y8t9vwp075g/video.html
How do you know the ratio/amounts ?
Hi. Did you mean the concentration of amine and acyl chloride?
@@morethanpurity1770yes, how do you measure the concentration of chemicals?
@@hemantpatil733 For instance, to prepare 0.2 wt/v% PIP aqueous solution, you add 0.2 g PIP into 100 mL pure water.
@@morethanpurity1770One more question,......Q. On what factor does the pore size of membrane depends ?.............is it that pore size remain same everytime we take same materials eg. PES & NMP ,etc..... I want to know how to make pore size big or small..... please
Fantastic content!
Thank you! very interesting! However, Marcel Mulder declare that Willem Johan Kolff demonstrated first artificial kidney in 1945.
Great video. Perhaps will there's gonna be video on how to prepare pristine membranes with difference porosity?
Thank you for your feedback. We will consider it.
Sir! I am 5, do you know if we can make this from plastic water bottle? I can also buy toothpick if necessary but i have to ask my mom first.....
Is it possible to email me the َAutoCAD file?
Hi! Nice video. Can you make a video also on how the nanoparticles make the membrane hydrophilic? (mechanism of nanoparticles) thank you!
@Filipina sa Korea Thank you for your suggestion. We will consider it.
Can you please tell me the name of non-woven fabric, time and temperature of the woven?
The non-woven is made of polyester. We did not produce non-woven. We bought it from market.
Good video! May I know what the water is? How long you soak the membrane into the water? And what temperature did you use in the oven?
The fabrication conditions vary depending on the researchers' approach, but in our case, the conditions are as reported in this paper - www.sciencedirect.com/science/article/pii/S0011916421005737?via%3Dihub.
Hi there. Sorry for asking, where did u get the rubber gasket? Sorry again for the random question. And thank you for this great video! Very helpful
You can buy the rubber gasket from hardware shop and cut it into the size you want.
Dear sir, presently i am making single bore membranes. I want to show some photos to you . How can i post. i have some photos and videos . i want to share with you . Advise please
You can get our email address here - czcams.com/channels/8spXM0bsbAqtXRCzfPZ2Sg.htmlabout
Dear Sir , Spinneret design and demo , super .
Thank you very much
Thank you very much for the advise and information . I am a Hollow fiber Researcher . I would like to make TFC hollow fiber membranes . Poly amide layer i want to make either inner or outer surface of the hollow fibers . i have lot of unfinished questions on this . can your please share yours mail id to discuss regarding this.
You can get my email address from the channel - ABOUT
Dear sir , Thanks for the video . very great . one question . Can i reuse this two solutions once again for membrane preparation . if, How much time , i can reuse this . Give advise please .
Yes, you can. But we advise you to prepare a fresh one after 1-2 hours you use the solution.
Can the TFC stick to porous acrylic surfaces?
Hi @Loyd, it would not stick to acrylic surface. This is because the bottom (adhering to acrylic plate) of TFC membrane is made of non-woven fabric and this material will not have reaction with acrylic.
It would be better to consider a protective layer on the surface of the glue (at the end of the fibers) to ensure that the surface of the fibers does not react with the glue, and it can also prevent the end port of fibers get damaged when it vibrates during operation.
Thanks for your comment. Can you suggest the material that can be used as "protective layer"?
@@morethanpurity1770 Polyurethane😄
@@mbrmembranemanufacturer Thanks!
do you have tutorial on how you apply this protective layer?
nice video!
Thank you for this video it was helpful
I like this content mate keep going ! This content needs P R O M O S M!!!
Thanks @Dominick! We will do our best!
Very good video!
Thank you. We are glad to know you like our video.
It is possible to observe the change in the membrane substrate due to the deposition of the PA layer without microscopy?
Can you contact me by sending me an email (lwoeijye@utm.my)?
@@morethanpurity1770 plz what is the type of substrate
@@zaidswalmeh9815 We used polysulfone substrate
brief but very informative ...
Very informative for a beginner....
Excellent and insigtful video..congratulations💐
Very useful👍
Thank you for watching, hope you enjoy the video 😄😃
hello , what was the dying degree?
time?
@@elahehgandomkar5976 Hi Elaheh. Thank you for your message. Can you please contact me via email (lwoeijye@utm.my
Good Job again...simple yet infomati ve. keep up the good work. Hope this will be benefit others.
This is a great video! Thanks for the upload. I am new to the field of membrane production and have some questions, and it would be nice to hear your comment on them: 1) How do you control the thickness of the different layers since you pour the monomers in excess on the surface. Is the thickness just correlated to the reaction time? 2) Do you use these TFC membranes for (RO) water filtration applications? Thank you again for sharing your knowledge, highly appreciated!
Hi Florian. Thank you for your message. Can you please contact me via email (lwoeijye@utm.my)?
The IP technique is used to create the polyamide layer only. Other layers such as the susbtrate layer uses other fabrication methods such as casting. In IP, various factors (such as reaction time, concentration of monomer solution used, post-treatment procedures and susbtrate properties) are among the few that could affect the resultant polyamide physicochemical properties (i.e. its thickness, roughness, crosslinking %, etc). Of course, these are not the only factors involved as there is a WIDE range of parameters that could be controlled. TFC is mainly used in nanofiltration and RO due to its denser layers. Hope this helps and have fun researching/fabricating membranes !! 😁😁
Hi brother, did you get your answers you asked above.....if yes could you please tell me ..... I'm also new to membrane thing.....i want to know how to make it ...pore size.... thickness and all..... please help me.
@@meiqun9909where can i know all this things..... Can you suggest some references or videos please.