- 59
- 567 920
SteinFab Garage
United States
Registrace 24. 07. 2021
Welcome to SteinFab Garage! We are Japanese car enthusiasts who love Drifting!!!!
Here you will find rebuilds of classic JDM cars, drift car builds, drift event coverage, and other wild content.
About:
My name is Colin and I've been modifying and working on cars for over 13 years. I started with a Nissan 240sx and fell in love with JDM cars. I have been drifting since i bought my first car, and nothing feels more exhilarating than wrestling a car on the edge of control!
Here you will find rebuilds of classic JDM cars, drift car builds, drift event coverage, and other wild content.
About:
My name is Colin and I've been modifying and working on cars for over 13 years. I started with a Nissan 240sx and fell in love with JDM cars. I have been drifting since i bought my first car, and nothing feels more exhilarating than wrestling a car on the edge of control!
Bobcat BICS Seat Sensor Bypass / Modification
This is how I was able to make the set sensor bluetooth from the seat (not connected)
DISCLAIMER:
Heavy machinery is dangerous!
This should only be used IF the sensor is broken and the machine is stuck
I take no responsibility for what YOU DO
USE YOUR BRAIN
DISCLAIMER:
Heavy machinery is dangerous!
This should only be used IF the sensor is broken and the machine is stuck
I take no responsibility for what YOU DO
USE YOUR BRAIN
zhlédnutí: 276
Video
Hustle Of The Week - Toyota 4Runner
zhlédnutí 13KPřed 16 hodinami
I really like 3rd gen 4runners. There not all worth saving...
The Skidsteer Lives!!!
zhlédnutí 519Před dnem
Finally got the bobcat running. What should I smash next?
I Bought A V8 For My Toyota Tacoma
zhlédnutí 922Před 21 dnem
My 1GR (4.0 v6) is a heap of scrap metal. Time to give my Tacoma the engine it should have come with from the factory...
Will A 80$ Timing Chain Fix My Cheap Tacoma?
zhlédnutí 608Před 21 dnem
Its been 52 days since I dropped off my Tacoma to have the timing chain replaced, time to take matters into my own hands...
Making 1400$ In 1 Day
zhlédnutí 502Před 21 dnem
I don't always work, but when I do, I do it for the Benjamins
VLOG?? My First Toyota Tacoma
zhlédnutí 399Před měsícem
I bought a truck in Texas. Come with me to get it!
SUCESSFUL Subaru CVT Ring & Pinion Swap
zhlédnutí 368Před měsícem
If you bought a CVT transmission that is the correct model, but the final drive gear ratio is incorrect, it can be swapped using the ring and pinion from your original transmission. Is it worth it? ill leave that up to you, but I did it, and it worked. If your paying a mechanic, it'd probably cheaper to get the correct transmission. This was done on a TR690, but will be the same process for a T...
Re-Gearing A Subaru CVT's Final Drive? TR690 / TR580 Teardown For Ring And Pinion- Final Drive
zhlédnutí 1,9KPřed 2 měsíci
I bought a CVT with the wring final drive, it has a 3.9 and I needed a 3.7. Sad day. No one seems to dive into these transmissions, so here we go! They are both TR690's, I failed to think there could be a ratio difference between the Legacys, and the Outbacks, Whoops! As every Subaru past 2012 has a CVT, it's time to get familiar, and see why no one touches them. Are they really that complicate...
How To: Resurface (EJ25/Subaru) Heads At Home - Backyard Machining 101
zhlédnutí 2KPřed 2 měsíci
Blown head gaskets? NEVER change a gasket without resurfacing (machining) the heads. Proper preparation is critical to ensure the gasket does not prematurely fail I do recommend having a professional Machine Shop do this service if theres any doubt in your mind. As a EX machinist of 7 years, I am showing you a hack that can save money, and more importantly, time. If you had a composite gasket, ...
What Went Wrong With My Cheap Bobcat 751? Peugeot XUD9 diesel Powered
zhlédnutí 706Před 2 měsíci
Why was my cheap Bobcat only 5k? Lets take it apart and find out! It only has 1004 hours on it! Zero rust. Original Paint. Im not super stoked on the Peugeot XUD9 Diesel, however we will see if the Bosch mechanical injection pump sways my opinion. If you've noticed I've acquired 3 diesels that are FULLY MECANICAL, and been playing with diesel heaters/ waste oil..... You might have some idea of ...
I SCORED A Bobcat 751 With Low Hours For CHEAP!!!
zhlédnutí 1,8KPřed 2 měsíci
Its been a mission to acquire a Skid-steer, but I finally got one! Words cannot describe how happy I am. Too bad its broken :(
How To Put A Steel 4th Gen Dodge Bumper On A 2nd Gen Ram
zhlédnutí 1KPřed 4 měsíci
The website that sells 2nd gen to 4th gen conversion brackets says you can't use the off road steel bumper. I own a grinder, and a welder, so that's exactly what I'm going to do. This video is meant to give you the general "HOW TO", but it can be different depending on the bumper you purchase. I went with the 70$ amazon brackets because they are thicker, and my truck weighs 10,400 lbs empty I w...
Tow Truck Gets A Face Lift! 4th Gen Steel Bumper (CTT PT:5)
zhlédnutí 388Před 5 měsíci
New headlights, grill, and a 4th gen off road bumper! The tow truck is nearing completion. I HATE BONDO, so the hood and fender need to go. Nothing like some brand new second hand Bumper cost is around 800$ with the 70$ brackets Hood was 100$ Fender 100$ Grill 65$ NOT HAVING MY TRUCK LOOK CLAPPED: PRICELESS In depth video on the bumper install will be out WITHIN 7 DAYS Like and subscribe :)
I Hate Facebook Marketplace
zhlédnutí 498Před 5 měsíci
I'm sooooooo done with Facebook marketplace Its. Trash.
2nd Gen Dodge Gets A Dash Replacement -Cheap Tow Truck PT 4:
zhlédnutí 670Před 5 měsíci
2nd Gen Dodge Gets A Dash Replacement -Cheap Tow Truck PT 4:
How To: Install Diesel Heater Under F250 Front Seat (F series/Expedition)
zhlédnutí 1,3KPřed 6 měsíci
How To: Install Diesel Heater Under F250 Front Seat (F series/Expedition)
How To: 15$ Alternator Repair Toyota 2uz (4runner, Tundra, GX470, Sequoia)
zhlédnutí 3,6KPřed 6 měsíci
How To: 15$ Alternator Repair Toyota 2uz (4runner, Tundra, GX470, Sequoia)
Cheap Tow Truck Pt 3: Seat Upgrade Fiasco
zhlédnutí 647Před 6 měsíci
Cheap Tow Truck Pt 3: Seat Upgrade Fiasco
Cheap Tow Truck Pt 2: Restoring The Headliner
zhlédnutí 954Před 6 měsíci
Cheap Tow Truck Pt 2: Restoring The Headliner
I Found Junkyard BC Racing Coilovers For 165$!!!!!
zhlédnutí 896Před 7 měsíci
I Found Junkyard BC Racing Coilovers For 165$!!!!!
DIY: How To Make A 110v Diesel Heater Wall Adapter For AROUND 35$
zhlédnutí 11KPřed 7 měsíci
DIY: How To Make A 110v Diesel Heater Wall Adapter For AROUND 35$
Unfiltered 100% Waste Oil Vs Stock Diesel Heater
zhlédnutí 276KPřed 7 měsíci
Unfiltered 100% Waste Oil Vs Stock Diesel Heater
Fixing Everything Wrong With my Cheap Tow Truck Part: 1
zhlédnutí 1,6KPřed 8 měsíci
Fixing Everything Wrong With my Cheap Tow Truck Part: 1
Saying Goodbye To The RB25 Swapped 240sx
zhlédnutí 302Před 8 měsíci
Saying Goodbye To The RB25 Swapped 240sx
I Bought The Cheapest Cummins Rollback On The West Coast
zhlédnutí 999Před 9 měsíci
I Bought The Cheapest Cummins Rollback On The West Coast
Just out of curiosity why do you use 80 grit sandpaper? Seems like everyone online is using 200-320 grit with this method. Is there any chance 80 grit will leave too rough of a surface?
Because 80 leaves the gaskets a surface to “hold” on to. It’s the same theory as why port and polish is good for airflow, but bad for fuel atomization. Sometimes rougher is better
Sorry to hear about your bud.
Like no sub = bad video, but thanks for the effort. If you are going to do a video about oil/diesel. Do that... not all the other b.s. and actually saying sub like we don't know But that is why I liked and didn't subscribe. Hope that helps
dude...do yourself a decent haircut ! it takes nothing to $10
I didn’t realize this was “Colin’s beauty channel”
underrated car channel
Doesnt start up.. “no major red flags”
It turned over, yellow flag. Red flag would’ve been locked engine 😂
@@steinfabgarage good to know , thx
She won't have fun and we won't bang bang bang! Not on my watch! 😂 I can't wait to make a video with u, ur too funny
Mentally challenged is the word your looking for
My first w163 generation Mercedes ML body on frame has 300k moles 😂 works like brand new, it’s an absolute beast on off-road and so so comfortable
I'm looking to buy a white gen 3 hood. I think you have one you can sell me. Please let me know
I don’t sell parts
@@steinfabgarage can you make an exception for me?
Wap bodies
My timing belt went out/started to go bad 20 years ago on a 3.4 with 84k miles. I can’t imagine them making it to 200k plus and 25 years old
Did you yourself see this? Or is that just what a service writer that lives off commissions told you?
@@steinfabgarage trying to go from memory I was in college it was 2004ish. I got a check engine light and running rough or it stalled. We towed it to the local Toyota dealer and they fixed something that was under 200. I picked it up from the dealer and rough running motor and check engine light again within a day or so. Had towed back to dealer. They fixed an issue for 5 or 600. Then as I was leaving the Toyota dealer parking lot the check engine light came on again and it started running rough and died. We had towed to a Lexus mechanic my parents used in town and they said timing belt bad and replaced it and never had issues again. Until I totaled it about a year later driving into deep water playing around after hurricane Ivan and it was a total loss to insurance. Water over roof. This was a 1998 3.4 v6 Tacoma. I can check for paper work now that I’m curious when I visit my parents around Thanksgiving. I still have the stuff from that truck. Enjoy looking back at how cheap stuff was. Toyota dealer oil change 29 bucks. I wouldn’t trust most Toyota dealers now from experiences. My FL one is terrible.
My 2nd taco i got around 90k miles and had it replaced around 2008 I miss driving those 3.4 v6 fun tough motor
Love your videos! I also like how you go about your repairs, everything is all lit up and easy to see for the viewers. I was never good with the timing chains, I'm one of the idiots who would rather just change the whole engine.
I can’t bring myself to put in a used motor that might have the same issue in a few thousand miles. But I do understand. I recently did headgaskets on a H6 Subaru,and it still had zero compression... -400 dollars in parts and machining. Then bought another engine for 1k and it ran great. Ohhhhh the joys of wrenching…
your long pause at 11:15 is what i do sometimes you just got to stay frozen in time and thought to figure shyt out
It be like that sometimes 😬
My aunt and uncle have a 2002 SR5 4R. Has over 200,000 miles on it. Starting to rust a little but they still have it. Should I tell them to get the ball joints replaced?
Only if they get OEM joints. I’ve seen originals last 300k, BUT it depends on how many potholes the original owner has hit
I do recommend it at 200k, then they’ll be good till 400k
@@steinfabgarage OK thanks for the information. They live up in the rust belt in Saint Paul Minnesota so I'm sure they've hit plenty. My uncle is pretty good at maintaining it. So sorry to hear about your friend.
@@MA-sz5xv thanks man, I saw a taco with failed ball joint yesterday, the lil clip will be in part 2. Doing it now is cheaper than the repair bill that knocks out a CV, brake line, possible upper ball joint, possible fender damage, not to mention a potential car crash
Aww dang now i have to change the ball joints on my sequoia.
Please do!
I have a soft spot for the four runners up until I owned a 3.0L V6 that was a total POS! Watch out for the ol strawberry milkshake in the radiator!
Ye I don’t touch the 3.slow. Both my 2nd gens are 3.4 swapped
I'm catching up on vids I missed. You know a lot of stuff. Your videos are fantastic and very informative.
Years in the industry… thanks for coming back!
Love your videos bro im about to benge watch since im off thursdays and fridays!
This dude is unbelievable! Just popped up in my feed and he is 💯 better than any other automotive channels I watch! GREAT VIDEO MY FRIEND 👍 I JUST SUBSCRIBED!😊
Thanks for the love!!!!! These comments make me unbelievably happy!
Lots of great info. Especially about the ball joints. Subscribed
I know undaunted is a word... so, I'm thinking that daunted is also. I dropped out too.
You gained a new subscriber
thats very cheap with no rust they last forever and here in California they drive forever and short people need running boards by taking them off you diminish your market..my wife is short and needs them and thats a 3k truck anyday...fix the valve cover gasket doesnt cost much
Bad time to say I’ve throw away around 10 sets of running boards? Oops 😬
That CV axle 😩
Do you mean the tie rod boot?
the good ol' 3.4l ... love them.
How much u go na sell it for?
To be determined. What do you think it’s worth? I’m thinking 4-5 after I fix a few things. It got a driveshaft and new diff fluid yesterday
It was an honor to meet you. 3rd gen is my favorite. Respects From The mighty Islamic Republic of IRAN 🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🇮🇷🏴☠️🏴☠️🏴☠️🏴☠️🏴☠️
I learned a lot in this little ep....and I can appreciate the knowledge and hustle you have. Sorry about your friend....and good on you for keeping things OEM. A little love to that vehicle goes a long way.
Love the video man! Have an old 3rd gen with 243,000 miles still going strong. Can’t beat these trucks especially for that price
You are absolutely correct on the lower ball joints, but i would also make it a ritual to change the bolts as well with Toyota OEM. While balljoint failure might occur, its also bolt reuse and failure that contributes to complete separation and serious risk.
I will start doing this, I have never seen that happen personally, and I’ve jumped TF outta that supercharged one. Still, better safe than sorry, thank you for the knowledge!
Awesome vid!!
Thanks!
Holy shit! Almost a 100% sure that’s my 99 supercharged i owned!!! I was always wondering where it would end up. I added the suspension wheels and sliders.. even recognized a sticker on the back window. Would love to know more about its life.
I can send you a bunch of pictures of it in its glory days !
Holy crap I bet that’s it… As far as it’s life…. I’ve beat it to the ground, but I’ve also blown people’s minds out-wheeling jeeps, jumped 2 foot drops into arroyos, driven up things that no one should have. And had the best winters hanging out with that toyota heater 🔥 Before me I know it was in Lake Tahoe as my buddy worked at a ski resort there. It came to me as a 5 cylinder (drove from Tahoe like that). I promise, its getting rebuilt better, I got heim joint steering in the works. And valves in stock to replaced the burned ones. I’d love pics! My email is Steinfabgarage@gmail.com
Need more 3rd gen content 💪🏼
I've had every Big Ticket repair possible done to my 09 Prius with the exception of the inverter coolant pump. I don't regret it, as it's just passed 250,000 mi, and it runs like a champ. I did pull the dash off and remove the combination meter myself, but I sent it off for somebody to solder on the new capacitor. Still getting upwards of 45-60 MPG. Luckily one of the local Toyota dealers here will install customer supplied parts, cuz I found parts cheaper at an out of town dealer.
Everyone who talks trash on Prius, hasn’t owned one. One of the best cars ever made!
Enjoyed watching this, a past machinist for many years. If head touch-up resurfacing with coated abrasives is something you do enough, might be worth picking up a good used Starrett granite inspection plate for a few hundred bucks.
I have a machinist straight edge, I’ll look into the Starrett plate! Thank you
This man is a goldmine of talent... Very skilled and nonchalant getting right to the point.
In New York or New Jersey those 4Runners would sell in a heartbeat regardless of condition...
You are doing it right! Those 555 will last max of 10K. I have a 3rd gen since 2010 and know inside out and I am not too far from you. Wow.. you got a ton of 4R. Mine is 97 white sr5 with moonmist interior. Do you happen to have the 99+ center console moon mist? Thats the only item it needs.
What’s a moon mist?
Glad that i stumbled upon your video. Good stuff 👏 glad to see your passionate about the 3rd gen. Extremely reliable suv
Cool video, new subscriber here
Sorry to hear about your friend, I feel the same about the ball joints. I just purchased a 1996 Tacoma that had a upper control arm failure, from rust. The upper control rotted away, so I replaced it with a good used Toyota unit and new genuine Toyota ball joints. I will be replacing the other side as well, even though I intend to sell it.
“202,000 is nothing for the 4Runners…” while there’s 15 broken 4 runners in the background. 😂
Only 5 parts cars, 10 run
Okay 8 run, I gotta wire the 4x4 swap 3rd gen, and the SAS 3.4 swap 2nd gen, my mistake. Then 5 parts cars 😅
@@Mason-fv1zl once they get a couple million miles on them u gotta part um out
It's always easy for you youtubers man lol
I hope you understand not one 3rd gen came factory with a supercharger on the 5vz-fe! It was a dealer add on option !!
Curious have you thought about doing a organization video? There is this guy that has all kinds of jeeps on CZcams and have them organized in a line. His channel name is DeXJs
Discovered this channel, the content is great!
Hey man where ya located? Love that toyota 4runner graveyard! Got any links to a decent 2nd gen 4runner exhaust for the v6? I got a 3.4 swap in my 2nd gen searching for exhaust... doubt toyota would have any left for them and don't wanna go autozone route. Thanks
I’m near Santa Fe New Mexico. I’m not sure about the exhaust to be honest, I don’t work with them alot
@@steinfabgarage I appreciate the reponesetho thanks
New Mexico vehicles are a dream to people like us in the North East part of the country where road salt and snow would rust any car in under 9 years. Nice to see extinct cars still alive
Got to love the new print out plates a decade ago u would get pulled over for improper display of a plate if it was in the window back in the 90s i got pulled over 2 days in a row in the same spot by 2 different cops first one was for a plate lite out cop told me to put the plate in the back window got pulled over the next night with the cop acting like he was going to shoot me to death yelling because the playe was in the window told him what the other cop said he dint believe me said he was writing me a ticket a few minutes later gives me my license and tells me to put my plate back but no ticket gues he figured it out lol
Happy to see another video from you. I always learn something from your videos. Those ball joints look so easy to change, love the ones that just bolt in.
Ah Scotch Locks, a sign of a quality wiring job. Also someone needs to make a hammerable line of socket extensions. Best punches I've ever had.