Video

If you mean the ram , it is

Many bike doesn't have that built in. These cheap solutions helps us to get an idea of the engine idle rpm, helps us setting carb tuning etc.

Hi, not really needed if only cleaning the throttle body butterfly... as done in the videos. If you have other issues like electrical or got a check engine light indicating fault within the throttle body, then you may need to remove assembly for repair

Of course if someone is available makes it super easy :)

2P1R for 4 stroke 4 cylinder

@@SakibChoudhury Thanks!!!

You are most welcome 😊

Hi, yes its for the tire air pressure warning light. I have to replace the battery of the tpms sensor of each tire but since I visually can see if I have lower air pressure it is not something must be checked and addressed hence I'm being lazy to get it rectified:)

You can put, 4 sata hdd ( or ssd ) . You can also use the x1 pcie slot for sata adaptors to add more drive or pcie x1 to nvme m2 adaptor and fit an m2 ssd. I have 4tb hdd, 1 tb ssd and 1 tb nvme m2 as of now.

Also the maximum I would believe it would support upto 16tb hdd.

Thanks alot. Appreciate

Thank you so much

No it only shows the engine revolution. For speedometer, you can buy gps speedometer.

www.amazon.com/dp/B07PMJH7QV?psc=1&ref_=cm_sw_r_ud_ct_D2RA10W1KSM759C7KFC0

im glad you found it helpful :) thanks for your comment.

The biggest issue is the lack of compatible power supply. The highest hp oem psu I found 500w. Which restricts the ability to go above 3060ti ( 4060ti ) , amd 6700 and at Max 6700xt which almost at the border line of a stable gaming platform. The future 7600xt might be well supported. However the thermal ventilation is also a big issue for bigger guards and no room for over clocking whatsoever . But since I already got the system and do gaming at 1080p 120hz . It is so far holding great and most games are playable at highest settings with 60fps. The last card I will try is 7600xt when it is realesd and then will build up a custom system once there will be no room for upgrade. For anyone who wants to have a gaming pc, it is wise to choose custom parts and I personally like asus line of motherboard , Intel core i5-i7 series and amd line gpus. For amd gpu sapphire never failed me. I avoid msi due to multiple of their gaming line motherboard died within months. For psu , I avoid Thermaltake, and corsair is the way to go. For nvme, always samsung or hynix.

@@SakibChoudhury thanks very much for the response. I've never upgraded beyond ram for a laptop so a full build is pretty intimidating.

I set the automatic oc fabrics to 1600 each as that is 1/2 of 3200 and after a reboot they responded as 2x16gb 3200mhz c16 after 72hours and 4 stress tests mem test 64 pass all times. Ram used was Corsair Vengeance Lpx 2x16gb 3200mhz c16

​@GrifballNation did the same thing with corsair rgb rs

1p1r if you have 4 stroke 2 cylinder engine.

I suppose you can with a clean cut with insulation intact.

Mine is 6600xt and worked without any issues. If the bios can't detect it, there won't be any display output. There are number of things need checking but I would start with a bios update. And also make sure you put power port if your gpu needs pcie power from the psu.

Not necessarily. Any 6gbps sata cable would be enough as long as they are authentic

I believe as long as it has the necessary pins to plug in the motherboard it should work. The little white pins that connect with the mobo is crucial here. The psu I'm using is not listed as supported with the baker motherboard I have ( on hp support list ) but it fits perfectly . And it's been months i haven't have any issue

Thanks for the input :)

You could also just add a sata drive like this guy did to have additional storage instead of replacement.

You wrap it around the spark plug wires.

The wire senses the electromagnetic pulses from the high current on the spark plug wire

Exactly​@@Racks47

That kind just picks up the current I'm the spark wire and makes a guesstimate on how many rpms it's at

So sorry, didn't have the tripod handy that time hence couldn't clean and record at the same time :(

Then what's the point? Seriously unhelpful bro

@Doom0690 you get the cleaner sprayed and a clean rug to wipe down the sut and deposits. I guess alot can least have the idea , it's not always how, it's often where . Thank you for your comment

1p1r mode. Which is basically for 2 cylinder 4 stroke engine.

It is also connected through a sata 3 6gbps connection. Maybe during the video, I took it of the cables to re management and ultimately in the end both sata hdd and ssd were connected with the motherboard and powersupply.

It is 8767. Chipset H470

You guess that right. The ssd is somewhat faster for game loading hence it is my game drive! But a mechanical hdd still the primary choice for data backup like photos , videos and docs.

That's a great info I'm sure anyone come across this comment can save some hassle while working on a max with hid. Thanks again.

I will try to find some link for you.

​@@SakibChoudhurywhere are the links?

@@brandonphilander661 RIP

HP Part No:L77487-001 HP Spare Part No:L89233-001 HP Model No: 500W EPA90 WS20 So sorry for the delayed reply. Your best option is to look at ebay

@@SakibChoudhury That’s a W

Well said. Yes the sufficient amp is also needed to ve drawn. Fortunately the 500 watt amp rating is just enough to power the 6600xt . I was thinking to switch 3060ti or 3070 but seeing the 6600xt performance I'm sticking with it for some time .

www.ebay.com/itm/185752789596?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=6sbHonGTSUy&sssrc=2349624&ssuid=xtkqmx5vryq&var=&widget_ver=artemis&media=COPY Maybe give this a try. Alternatively you can try using an adaptor obd to obd2 to use with obd2 scanner. I will look more into this and surely if find something, inform you .

@@SakibChoudhury thank you, your a legend.

The pleasure is all mine

Thinkdriver is a good option for obd2 scanner which also can be used to scan abs or srs codes.

For my 08 I actually ordered from ebay . Didn't specify any size but when you type oem speaker for maxima it loads the listing and from there you can select. If you have a bose unit then I believe the size might be a bit different than the non bose unit. Sorry couldn't help you out with actual diameter

@@SakibChoudhury no problem video still helped alot i appreciate it

The pleasure is all mine :)

You got that right. For passenger side, if you remove the wheel well, you can easily access the white piece that basically house the bulb. You may have a higher trim and might be a projection headlamp . In this case you might have different bulb socket. I hope you get it done. Ps : generally when a headlight goes bad, it is almost guaranteed the other one would fail soon. So it's always a good idea to replace them in pairs:)

I just did passenger pretty sure the ballast died on the passenger side. I did this through the wheel i plugged everything in and nothing on the passenger side turned on. I tried multiple bulbs. Eitherbway for hid turns out theres not enough space to put the bulb and that white cover over its impossible for me unless i bend the metal on the left or break some of the plastic of the headlight. I saw a comment saying hid is different on another vid either way i gotta take off the bumper now. It still worked hust couldnt clear it with everything plugged in prob an hid thing. Light failed after jumpstaring car so and coolant leaking there so rip.

I see. I'm sorry to hear the trouble regarding the light replacement. Yes hid unit might be different than the halogen unit came with my car. But I definitely changed it with only a portion of wheel well removed and was easier than the driver side. I would advise you to locate nissan guideline for replacement procedures for hid bulb. Also get a multimeter and have the voltage checked on the prong before putting new bulb. Make sure there is no short and the fuse for the headlamp is the recommended rating. If it is 10 amp then ensure that a 10amp fuse is attached. If there is any short or other electrical issue , generally the fused would blow which is most cases confirms a short in the wiring . For coolant leak, I would advise to get it fixed asap ,I had similar issue but it was the transmission oil which was leaking for the lower rad and I ended up using a separate cooler ( hyden) for the trans

@@SakibChoudhury for hid the drivers side i did from Above removing the airbox Unfortunately couldnt close the left side with a bulb even in bc of the dumb hid thing. Yes thats a good idea to check the voltage. Would the fuse for the headlights cause both to stop working because only one isnt working. This is after jumpstarting like 3 times because of a dying battery near 3 years old. Yah the coolant leak is the upper radiator hose i have those u clamps but need to buy a screw clamp added on to put enough pressure. When did you change your tranny fluid? I changed it at 73k miles now im at 95ishk

I need to check if there is a pair of fuse for both headlamp or just one. I did the trans fluid change twice , once when it is 100k and then at 150k. Now it is 162k and counting. Runs ok though

I ordered at Amazon. Search for sata III cable 6gbps. And generally find one with good rating. Normally the are like within $6 for 2 cables

@@SakibChoudhury got it, thank you so much!!

@@vandythevandy you are most welcome:)

@@SakibChoudhury Just wanted to update - I am a total noob to PC building/upgrading and was confused about how to install them and this video helped me do it successfully so thank you so much again for sharing this!

@@vandythevandy the pleasure is all mine

Impressive ! I have installed the side fan however do you recommend installing the second fan by replacing the system fan ? I have ordered 500watt psu from ebay and planning to upgrade the rtx 2060 with rtx 3070 .

​@@SakibChoudhuryLate reply, but I have the same pc (tg01-2176z). Can a normal psu be used or only OEM hp ones?

Normal psu can be used with adaptor.

@@SakibChoudhury Thanks!

Thats a generous suggestion, not something didn't cross my mind however the tiny property pins are a hassle to work with and I'm yet to find an adaptor which would be more practical solution. Last but not least the awkward size of the stock psu ( more of rectangular shape) and the casing itself designed and crafted to accommodate the stock psu would surely require some drilling and modding , if somehow that too is done, must drill holes in the bottom of the casing as most psu will have fan installed at the bottom . And I might well as do all these and upload my findings. Maybe would go back 15 years in time when enjoyed building pc and was a kiddo :D

Could be . But I find it much easier to remove air filter housing . Beside if you remove bumper cover then you also have to remove headlight housing which is another extra step . But if you found a shortcut then good for you .

@Frank Perez , he literally starts the video on how to take it out without removing the bumper..... and what do you do? You decide to comment against his decision. Just respect how the man did it in his own video. A+ B = B+ A, Still showed how to get the lights out

@@jimmyjohn5707 everyone has a right to give feedback

This works only for the driver's side bulb, on the passenger's side the bumper cover has to be removed.

Thanks. I’ll either use this method for the same side and bumper for the other, or I’ll just go bumper, good vid man.

You are welcome 😀

You need to take off wheel wall and then should be able to reach the bulb housing.

@@SakibChoudhury okay ..I'll try that I just bought the car as my daily .. white 2004 with 153k it's very impressive with acceleration I just cleaned the headlight housings now I'm trying to install brighter bulbs good car ..very quick too

@@dennismichealsm3786 best of luck. Yes the vq35 engine is very impressive in term of instant acceleration. Make sure once you put the bulb and twist the white housing back it is properly sealed so that dust and water can't enter.

thankz :) im glad to hear you liked it bro. the brand is pulsar and the bike model is pulsar 150 2011 model.

g.k g.k yes bro it's quite a bike. Can take much torment and rev happy motor. I did 133 kmph with my AS 150 and a superb bike for long distance travel

yes , as150

Mahfuj Rahman thanks bhai. I'm sure you can do even better flying if you just start flying :)

aww thankz

আমিও ভ্লগ করি