Video

No, just rear one.

Yes. From technical reason it is blinking once per few seconds when the bike is moving.

Yes, even 3M in the technical sheet recommend the heating with hairdryer and strong pushing to increase adhesion. Adhesion is also better later after some time than immediatelly after aplication. But from our experience, even after sticking it is holding enough for using. We had no problems and no complaints about that. The surface must be clean, ideally cleaned with alcohol or even better with isopropylalkohol.

No problem. You can order it here: www.lskelectronics.com/store/CNC-Machined-Fuel-Cap-Holder-for-Yamaha-Tenere-700-p619105725 😁

Yes, if you have 4 connectors, you have the older version. Difference is only in connection style. Once you connect it, it is doing exactly the same. 👍

@@lskmotorcycleelectronics7444 all fitted. Works perfect 👌🏻.

No. Only the rear one. Bike does not allow disconnecting front ABS at all.

Yes. In actual version the dongle is placed in the box with built-in bracket. We also reduced the harness to just one wire going to the diagnostic plug. Installation video here: czcams.com/video/jZawJfQCDpo/video.htmlsi=ohRLowKzcfDoNYYH

@@lskmotorcycleelectronics7444 Thankyou. Just received mine and thought I might have been missing the bracket

We have one 2023 (color TFT display) and it is not accurate. When it shows last point of fuel, there is still maybe 150km range. I expect that 2024 model is without the changes.

No, it is really end of the production. We are manufacturing these gauges for many years and now it is a time to move to new things. :)

Hi, it is our prototype, absolutely unique matrix lights which working as cornering lights, they can switch betweeen low beam pattern and high beam pattern and DRL function. They also have amazing power output and they are copying actual state of the main light on the Africa Twin. But due to problems with making them road-use legal, they have never been pushed to series production. Its a pity.

Thank you for the answe but i mean only the Mount for the LED Lamp can i buy it (only the mount)

Not interested, thanks.

@@lskmotorcycleelectronics7444 Ok Sir

On Tenere with black/white LCD dashboard you can control rear ABS also during riding. Off-road mode (rear+front ABS off) can be controlled only when the bike is still.

It is due to big demand. Waiting time is ca 1 week but we are continuously increasing manufacturing capacity. Within few weeks we should have enough pieces in stock. :)

Yes, it is compatible with 2024 models.

Yes, tested! 👍

@lskmotorcycleelectronics7444 I ended up buying a used 2020 base and installed your dongle. Mine had no 12v accessory, but the dead-end plug was still there. BTW, do you have experience with speedo dongles for an AT? Mine had a 15 tooth front Sprocket, which I like for off-road and heavy loads, but my speedo reads about 13km faster, and mpg data will be off. I have heard of dongles but don't know if they are easy plug n play for AT? I assume they would correct all computer data?

I will take care about that.

I phoned rugged roads but the person I spoke to didn't know when or if thay would get them.

@@JohnSmith-ef8nr Please wait a few days and try again. It's just a few days after release, and it takes some time for our dealers to receive and list them. 👍

I think that it will be coded in the ECU and not accessible from outside.

@@lskmotorcycleelectronics7444 That’s a shame, you have created some great additions above the standard bikes controls, was hoping it might be something you would’ve been able to tackle, but if it’s in the ecu, I guess not. Thanks for replying.

This bike is 2024 EU version. But it works the same on all versions with color display dashboard

Ot is for turning on/off all electronic assistants with single click on star button on left handlebar. Moreover it kills the safery message after every new start of the bike.

Hi John, the pre-orders are already open. Just choose the right type of Tenere. Link is under the video. :)

@@lskmotorcycleelectronics7444 I'm in the uk, so I had a look at rugged roads uk but can't see them on there, thay did have the tft one but out of stock, I need the 4 pin Euro 4 one.

@@lskmotorcycleelectronics7444 I can't buy from your site because I'm in the UK, rugged roads don't sell the Euro 4 version yet.

Great! Thank you for your support! :)

We hope it will be completle ready in April.

@@lskmotorcycleelectronics7444 Awesome, will be waiting for the news! We have a pretty big T7 community in British Columbia, Canada and there are quite a few people interested!

​@@peterlv Hi Peter, the pre-orders are already open. We will start shipping them before end of April.

@@lskmotorcycleelectronics7444 Thanks for heads up! I got email on March 15th and (pre)ordered the same day.

Yes, for the latest Tenere with color display it is also available. www.lskelectronics.com/store/Yamaha-Tenere-700-ABS-Off-Road-Dongle-p614712035 Just choose your bike version. Cheers! Jakub

It is necessary to stop for the ABS change. This is the behavior of the factory ABS unit, which we dont want to modify (flash/replace - that would lead to additional expenses and service installation, any change in factory unit can also lead to loosing warranty).