Video

🤙

Fmf powercore 4, header and muffler

In my country this motorcycle almost cost a house in a poor neighborhood.

This is the fender I bought. They now list it for the XR650L. (Polisport UFX Free Flow Front Fender CR Red for Honda XR650L 2012-2017) But you know as well as I, the XR has been the same pretty much since the 90’s. When I bought it the area where the mounting holes were was slightly raised and I added a couple of washers to make the gap larger. I had to modify the hole pattern slightly mount the fender itself. You’ll see if you decide to buy one, it’s pretty easy to modify and mount. Maybe now they have adjusted the mold to make it easier. But like I said, it’s pretty easy to get it mounted up. And for 45 buck looks pretty good on it. Best of luck!

I got the headlight from “Rocky Mountain Atv” just put xr650l led headlight in search. And I got the tail light off of Amazon. Same deal…xr650l taillight. I believe Rocky Mountain has the tail light as well. I believe it’s made by western power sports. Will fit right in factory fender. Remove that whale tail eye sore that’s on there. The fender will look like the 650r fender. Fits right in the groove. I high suggest buying the extra bulb they suggest you buy. Mines been on for a couple years now..but ya never know. Best of luck.

Hey thanks for the info appreciate the cable info. I have an lectron carb in order just waiting for it.

They’re alittle lighter, but mostly just for the looks. I paid 800 total when I purchased them.

The difference i noticed with the pipe was, I bought the full exhaust system, header and muffler. Yes, it was alot lighter then the stock set up for sure. You will also notice it in the lower end, the bikes throttle response was much faster at the lower end. And believe it or not, your gas consumption increases alittle bit because you have to put in, at least, a stage one jet kit. The pegs...I bought the pegs off Amazon..I literally just types in xr650l foot pegs and the one I bought came up, and I was pleasantly surprised. I canr remember the name of the manufacturer tho..sorry..ill look in my Amazon history for you and post it if I find it. But, nice, quality, bullet aluminum, cheap..and no complaints.

I've done the smog removal, the air filter, the pegs, handlebar risers, put a rear rack. Different mirrors. So far not ambitious enough to change the pipe or move the battery but I absolutely love my bike. I've had many bikes over many years and I just love riding this bike. It has the most fun power band and I'm starting to like the handling.

I got mine from "revzilla"

lol there's a very limited amount you can do..heres the second vid..I put a seat cover on it too a couple years ago..I also took the acordian fork protectors off and put red shock Sox on it. and bought a new front number plate..a red one..the one that was stock was white..I just bought a 2008 one I think. czcams.com/video/USSI59nt9sc/video.html

@@michaeldavis5565 cool!! If you go to my channel, I posted a mod vid last year on my 2019.i owned a 94 for 12 years and had to sell it,told myself I would have another one.i just wanted to make mine look like a 2019,and not a 1993.i am going to post another video when it warms up a bit,to show the latest mods I have done.my wife rides with me all the time,2 up,even on single track in the woods. Love these bikes!!

@@darrinwoodward14 sooo cool your wife rides with you..ill check the channel too! And I agree..there nothin like the big red pig!

I have another vid on here where i put led turnsignals on it. I didnt change anything but the signals. Same relay, no diode kit..just pulled the incandescente bulb out of the dash and it works fine. as far as the smog delete..if you can change the oil on you bike you can do the smog delete...literally takes like 15..20 min. to do. theres probably a video here on you tube to do it. the kit is around 30 bucks. you can get it on amazon.

this is the led turn signals...also bought off amazon..20 bucks for all 4 and they still work great. czcams.com/video/USSI59nt9sc/video.html

yes, I've had Dunlop, Michelin and Pirelli. The Bridgestone seem to wear slower then the others. I do have another set of tires, I keep on the stock wheels, they are Pirelli, softer comp, they work amazing in the softer soils, especially when saturated, in Northern wisconsin.

no not at all...in the other vid I posted i even installed l.e.d. turn signals..with no modifications to the signal or the pipe. if some one had to mod the turn signal..they didn't have the right pipe. bolts right up.

@@michaeldavis5565 thanks Mike

@@michaeldavis5565 you did a dyno jet? I’m trying to figure out what I need to do as well. Is 158/55 sound right? I will be between 900-3000 ft and I also will be installing a uni filter.

@@629ripley yes I did the dynojet...I live in wisconsin..so im at about 700' where I am. I installed the stage one, I believe I used the 160 for the main. the research I did said for my set up...fmf header and exhaust, k&n filter, the stage one is all I needed. if you intend to mod the motor more..cam, etc. you can move on to the stage 2. bike did noticeably idle high, but definitely has a faster throttle response. I've read that the lectron carb works incredible in these machines. Just not sure about pulling the trigger on a 700 dollar carb. Bike runs real nice with the set up..no back firing..at all, smooth idle, and nice throttle response.

@@michaeldavis5565 perfect I think I will do this setup. So just the main at 160 and no Dave’s mod? Where did you get your 160 jet from?

that is the factory rear fender. The aftermarket tail light fits right over the mounting area where the factory tail light goes. the only downfall is, the aftermarket tail light doesn't have a light for your license plate. I have never ran into a problem with this, but cops are different all over.

ty

yes

@@branndonmoriarity862 they won't function properly...like stay solid..or turn on left direction and the right one goes on and stays solid.

@@michaeldavis5565 You can use the indicator light on the dash if you run a diode between the stock wiring and the light. Bikemaster sells a good one.

warp 9 www.warp9racing.com/product/mx-wheels/ you can make pretty much any color combo you like.

the light was purchased from...rocky mountain atv. the bars were bought off amazon.