Video

Definitely overkill 😂 all you needed was the glass polish and IPA, but saying that, if it worked out for you then 👍🏼

I have Angelwax vision glass cleaner. I bought that after I did all that other stuff, otherwise I probably would have used that also, but just before the IPA. Instead of barkeepers friend you can use the pink stuff to clean the grease😂

@harimadhavan1712 I know glass is very hard, but just be careful with these cleaners are they are very abrasive. They will clean very well, but could easily scratch 👍🏼👍🏼

@@HarpersCarDetailing The only one I was worried about was the steel wool. I forgot another thing I think, but can't remember if I did, was fallout remover on the screen when I was washing the whole car and previous to the other stuff 😁 As well as the rain it was about September, October time and I was getting prepared for snow and frost. It definitely made it easier to get off👍🏾

It’s pretty much identical IMO. It’s Autoglym Coat It that I’m using, but I think that’s pretty much the same as Polar Seal 👍🏼

Thanks! It’s very good. It’s cleans very well as is economical. KKD have been tricky to get hold of and prices have gone up quite a lot. I’m going to do a video on a rinse less wash type of product as some point which is great for summer washes 👌🏼

@@HarpersCarDetailing Oh a rinseless video would be great! So give your tips on how best to do it, I bought a bottle but hesitant about using it so far in case I end up scratching the paint. I'll wait for your video to drop before trying 👍

Including interior, probably around 2 hours

@@HarpersCarDetailing good work,

You’re going to have to be more specific

@@HarpersCarDetailing Sorries, what were you using to clean those parts?

I haven’t looked at the dilution at all. I use about 30-40ml and top up the litre bottle with water

I’m using Bilt Hamber Touchless in the pump sprayer 125ml/5,000ml so 1:40

@@HarpersCarDetailing thank you very much!! The Audi looked amazing once you were finished. Keep the videos coming.

Thanks man 👊🏽

Including the interior it took around 2 hours. I don’t just do exterior washes 👍🏼

Infinity wax shampoo and a generic twist and loop 1400gsm towel

Thanks man! I’m honestly not too sure. I might have split the other glove and not replaced. There’s no secret to only wearing one glove if that’s that you are thinking 😂

@@HarpersCarDetailing 😆 Great work matey. I have worked at main dealerships as a valeter, and been a hobby detailer for a long time, so I appreciate this was the sort of clean which requires some forward thinking. Hope your channel keeps growing.

Thanks Tony 👊🏽

It’s a Vikan nail brush 👍🏼

@@HarpersCarDetailing much appreciated sir thank you . Great videos by the way

Thank you 👍🏼

Yes you can absolutely layer it. The reason I rinse is so I can agitate the intricate areas when I foam. If I did that straight away I would potentially be rubbing dirt around

@@HarpersCarDetailing Good point. Thanks mate

All good thank you 👊🏽 Touch-less is really good; I’ve been very impressed with it 👍🏼

👊🏽

Thanks Ally 👍🏼 I’ve never understood why people clean the barrels first as it drags the dirt out on to the face of the wheel!

Thanks man 👍🏼 They are the same helicopter. Not sure if they are named differently in the USA compared to the UK

@@HarpersCarDetailing that’s not correct. The H-125 is a single engine formally known as the as350. The helicopter you washed is an as355N twin squirrel or twin star not an H-125.

It’s the same with any cars, but the swirls are a lot more pronounced on black/darker cars 👍🏼

Thank you very much 👊🏽

There will always still be a little dirt left behind on the paintwork. To minimise the risk of marring the paint, I always keep the wash mitt as clean as possible with the second rinse bucket

Thanks man. Really appreciate it 👍🏼

Thanks Eamon 👍🏼 really struggling to find time to fit videos in at the moment!

Infinity Wax Pure. 25ml in 10 litres so 1:400

Thanks looks very slick ​@HarpersCarDetailing

😂

Thank you 👍🏼 Pretty much identical. Polar seal is more economical for me as I can buy is in 5 litres 👍🏼

It’s a great maintenance wheel cleaner. An iron remover would be needed for imbedded contaminants 👍🏼

@@HarpersCarDetailing thanks for the info! at what dilution ratio do you use it at for maintenance washes?

I just use it 1:8 for everything. You could easily dilute to 1:15/20 if washing every other week

@@HarpersCarDetailing great to know cheers for the reply mate 👍🏻

It’s a clear liquid as well by the way. I added a little colour to mine so I could differentiate it from other bottle quickly

Thanks! It’s from Gleem Detailing. They have a handful of colour options 👍🏼

Thank you 👍🏼 I use 125ml topped up with water 👍🏼

Slim fit. Skinny are too tight

I use a step ladder. Even if there is a hidden step I prefer not to use it 👍🏼

How did it go?

@@HarpersCarDetailing It went well. It was washed by the owner, I used a DIY PSD towel. Dried it after that. Used Swag Detailers true cut compound on an orange force 5.5” pad on a 15mm swag detailers polisher. Good results. Perfect? Not even close(as Brian at Apex says). The customer was happy. Topped it with Swag Detailers “Slick Shine” ceramic infused detail spray. Looked much better seeing it looked like it was washed with rocks initially.

No they aren’t. Tape them up to avoid polish transfer 👍🏼

Thank you for the answer ​@@HarpersCarDetailing

Water and a microfibre should do the job 9/10. If not, then a mild APC and vacuum after 👍🏼

No need. I did the rest straight after

@@HarpersCarDetailing much appreciated sir top man 👌👌

Thanks, Jamie 👍🏼