Video

ACE video!! My finish on an antique box restoration project was all bumpy and grimy feeling, with this method it came out all fancy and professional looking. Thank you for the precious advice!

Safety Dan was cut out of the budget apparently

Excellent presentation, that is clear, concise, and to the point.

Will this work if my top is painted. I used chalk paint and then I finished it with oil based satin Poly.

Impressive video. One thing I add as a difference, perhaps belt and suspenders. I make sure to use the biscuit cutter (or other guide tools) on the same side (up or down) on all the boards. This is extra insurance that I need not be certain my biscuits (etc.) are centered top to bottom. Again, as implied here, the purpose of tongues/grooves, biscuits, dowels, or dominoes, is alignment, not strength. Today's glues are so effective, these other measures add nothing to strength or longevity. Where would we see this happen most? Flooring. Narrow boards, many of them, no time to fiddle with multiple additions of one board to the larger board, and let's make sure it is flat, as flat as float glass if possible. Maybe this is not so true for those who use older (think purist) glues, such as hide glue or rabbit skin glue.

I'm curious to see the outcome for this wooden 'flammables' cabinet when it is subjected to a fire or intense heat.

A sharp chisel is for the end of the notch.

Left to right or right to left?

Chequeala

Slick as greas!

Also grinder RPM? I have little experience sharpening but was wondering if that length of time with gouge on coarse stone could generate too much heat? Newbie here.

Thank you! So clear!! What speed are you working at (RPM)?

Excellent!

Thanks for this Tim!

Really clever

Damn it's a shame to see channels like this not gain the traction they deserve.

DO NOT GO IN A CIRCULAR MOTION IT WILL CAUSE SCRATCHES

Great video instruction ... I have had one of these drill press mortise attachments for years because I bought it on a super sale and thought it looked useful. Now I need to use it and could not figure it out. You saved me! And the Ooops's at the end are great too!😄

where can I purchase plans for this build

Where can I purchas plans for this build

How would you add that crown in those straighteners with a jointer? Great vid and thanks for the info!

of all the vids on this subject this is the only one to follow,

Good/simple idea, but he should have clamped both ends of the fence, as you can see the end with the stop block moving at 6:12. Still something I’ll consider, thanks!!

The bandsaw with granite too trunnions are alum/pot metal crap. Tilting your table will break then, and your saw is usless.

Hello, soul artist management was messing up. All my typing, tommy mike

Tell me, Mike, take control of the State of New Jersey and don't take me seriously. My family from Polk County or soul artist management. I have to pick someone to see who is serious. But don't take them seriously. Brenda Stewart or atoria Robinson. Or Ben Johnson or oldest Williams or trickman or Raymond Davis or Robert University are revenge area farewell, liberally university, or Kenneth Copeland and Gloria Copeland or it's for Joe Osteen and Victoria Austin.

Safety Dan and the Penn State Shirt

Hello, I am new to woodworking. Could someone tell me in order, the steps to make this. It looks like it really works great. Thank you!

Do you need to add a wax or anything after?

This didn't age well.

I only have a Delta bench top drill press. Will that setup work with that???

Brilliant content, well done.

I'm used to larger, corded routers czcams.com/users/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

Thank you

We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives czcams.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great czcams.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

Good idea.

He says “4zero steel wool”, but I believe he means it as “#0000 steel wool”. Be careful people as other types of the wool than 0000 will be too abrasive

So how do you square the fence with the chisel ? if you're swinging the fence around a pivot at one end, it won't be square with the bit, sods law.

Como puedo comunicarme con la tienda de partes???

It’s not a circle, it’s a ring. It has a hole in the middle.

When I do that last step I do it with 4O steel wool and Howard’s orange oil and wax. Smooths without scratching and puts a beautiful shine on finish

I'm assuming the finish is poly. Will this work also with laquer?

I know its nine years later....but i love your simple explanation and demmo. Will give this a try in making one. THANK YOU VERY MUCH !!!!

I'm so excited to do this, we don't have a planer and I have a nice big flat bowl bit!!

IIs this done in between coats or ONLY on the final coat?

I like very large joints. But not while using power tools.

Thank you I needed a fence for the used band saw I bought perfect❤

Not even gloves? your hands are gonna end up sticky for hours

Whoever thought "let me glue a bunch of wood together to put my food on before cooking it"