Rupert Roams - 22r Head Swap and NEW HEAD GASKET! Part 1
Vložit
- čas přidán 20. 01. 2021
- In Part one we begin tearing down the 22R in Ben and Sarah's 1987 4Runner camper conversion named Rupert. Check out @rupert_roams on Instagram and follow along! In the next episode, we will start putting it back together!
Check out NAC!
www.northeastadventurecompany...
Join our Facebook Community!
/ northeastadventurecompany
/ northeastadventureco
Follow our Instagram!
/ northeastadventurecompany
Come hang out in the Northeast Adventure Community on Discord!
/ discord - Auta a dopravní prostředky
Part 2 would've been so helpful !
Funny how you can find a video 3 years old and still learn something from it. Awesome video.
Please show us part 2. Awesome part 1 BTW!
What a good video. I bought a 85 few weeks ago. Now I am also learning on how to work on my engine incase I ever run into the same situation. Thank u for the step by step.🤘🏻
and he never put it back together
The best advice I can give to anyone doing this head replacement, would be to go ahead and do a piston ring job, rod bearing etc., at the same time. I did the head job, and not long after the ring job needed doing. I had to pull the head again. Save yourself some time and labor. Do it all at the same time.
Great video! Very informative for someone also about to crack a motor in apart for the first time. Can’t wait for part two! Cheers!
RIP part 2 😢part 1 was nice to watch, wish I could watch you two
Where’s part 2? Great part 1..
Come on where is part 2?
It’s good to see another video from you guys. It’s been way to long. Can’t wait to see the rest of him getting put back together. No trail Videos this year I take it with the situation we are in these days.
Don’t worry, we have more trail videos coming out this winter!
I use to fart around with a bungee cord too ., but I found ., taking off the gear and letting the chain go down , is just fine. Keeping the marks on crankshaft and cam at 12 o’clock ., during the entire procedure
I was wondering cause I just let mine drop
This was a great video, nice and slow for someone like me who’s never done this before. Have blown the head gasket on my 1992 Toyota pickup. I’ve been driving it for 30 years, first trouble I’ve ever had with it. Did you get it back together? Wish there was a part 2. Thanks!
Crud. I'm where you left off with this vid. Was looking around for inspiration in putting everything back together. Hope you got yours back together.
I'd love to see a video of the camper conversion!
We have a walk around and some vlogs on the channel!
Love the Toyota Camper when you first introduced it here on YT!
No part 2?
🤔THAT Toyota 22 R ENGINE REALLY WAS THE BEST 4 cycle 4 cylinder ENGINE WAS EVER MADE . I REALLY DO KNOW I AM A REAL ASE certified master Auto technician .or a REAL certified ASE Master Auto Mechanic WITH OVER 60 year's of REAL experience .🏁🏁
I need part 2 to finish my head replacement 🙏
improper valve lash is the cause for that unusual camshaft wear.
That’s a rod knock
When's part 2 coming?
Do you have the dimensions as to making the wedge block to hold the chain? Thanks.
Head gasket on 22r just went out. Perfect video
so will there never be a part 2?
any mistakes ?
I’m running into this exact issue. Could you not just replace the cam alone?
Still working on part. 2?
you better replace the rocker assembly.
Part 2?
Where is part 2!!!!!!
Does yours have a lift kit?
Anyone ever notice every 22r head gasket video on CZcams theyre running green coolant?
Red don't leak?
part 2?
How much was the tent?
What happened to part 2?
What camper is that
fiddle sticks