MINI COOPER SERVICE

Sdílet
Vložit
  • čas přidán 9. 07. 2019
  • MINI COOPER SERVICE & General Check
    Oil change & filter
    Spark plugs & Air filter
    Check brake fluid and water/coolant (can also change cabin filter & fuel filter)
    The Lamba sensor goes if only doing short distances.
  • Jak na to + styl

Komentáře • 33

  • @BigArch6564
    @BigArch6564 Před 2 lety

    Cracking vlog and thanks again for sharing buddy!

  • @nicholasptg6224
    @nicholasptg6224 Před rokem +2

    Playing a dangerous game using a electric ratchet on those plugs the amount of technicians I’ve worked with that have ended up cracking the plugs and the ceramic going down the bore it’s not good then you either have to take the head off to remove all the debris or is a scope try going down the bore with something sticky to pick the bits up because ceramic does not wear it will just cut the piston sleeves up nicely

  • @kwakkers68
    @kwakkers68 Před 2 lety +2

    The A series are a joy to work on compared to these things! ;-)

  • @MK3GOLFMIKE
    @MK3GOLFMIKE Před 4 lety +7

    C3 5w30 for the R56 N12. 0w30 is more for the newer F series

  • @BKZLOC42
    @BKZLOC42 Před rokem +3

    anyone else see the leaves stuck to the last coil pack from the dirty cowl he placed them on. faster isnt always better plus power tools on the plugs come on bro

  • @lennyweigert2605
    @lennyweigert2605 Před 3 lety +1

    how exactly do you change the lambda sensor on this model? just pop the sensor out and put the new one in?

  • @saulgoodman7495
    @saulgoodman7495 Před 3 lety +2

    What about pollen filter? I'm pretty sure it needs changing each service on this model.

    • @WildwoodTV
      @WildwoodTV Před 3 lety +3

      We didn't film changing the cabin filter or checking/topping up fluids, it also had an MOT 👍

  • @TheMay1985may
    @TheMay1985may Před 3 lety +1

    Gracias por el vídeo puedes localizarme el caudalimetro sensor masa de aire que me sale p111b y deseo limpiar o sustituir

  • @Listermintsluesh
    @Listermintsluesh Před 4 lety +1

    What about tuning ?

  • @jimjamjee3220
    @jimjamjee3220 Před 5 měsíci +1

    How often do you strip the plastic threads on the air filter housing by using that power ratchet?

  • @Marco34708
    @Marco34708 Před 2 lety

    Did you notice the debris that went in with the replacement of spark plug 1?

  • @MrNikoLov3
    @MrNikoLov3 Před 3 lety

    😂 don’t ! Just don’t put water in your radiator or stick a rag in the filter cavity Also, what did you say happens when you overfill with oil? 14:55 🤣 “there goes your car?” 😂

  • @robertsinderberry4124
    @robertsinderberry4124 Před rokem +2

    How many Nm was the sump plug ?

  • @derekt7606
    @derekt7606 Před 5 lety +1

    Repeat ?

  • @SLR-722
    @SLR-722 Před 4 lety +1

    It is Mini ONE

    • @MrMeltedwellies
      @MrMeltedwellies  Před 4 lety

      yes it is thanks for watching

    • @WildwoodTV
      @WildwoodTV Před 3 lety +1

      It's my Mini Cooper, but Mini Ones are similar 👍

  • @pigdrivers
    @pigdrivers Před 2 lety

    N16 engine

  • @wellwh0
    @wellwh0 Před 3 lety +4

    That oil stick is impossible to read. You can only tell, "oh yeah there is some oil". most useless thing ever. Only in morning is possible to read it when is cold outside, and car has to be on completely flat surface. On hot summer days, no way I can read that stick even if want to.

    • @tm5346
      @tm5346 Před 3 lety

      I agree the dip stick sucks

    • @wellwh0
      @wellwh0 Před 3 lety

      @@tm5346 great thing is that car doesn't consume oil, so you are care free.
      Not.

    • @conniemadden174
      @conniemadden174 Před 3 lety +5

      I lay the stick on a paper towel and look at the transfer on paper

    • @wellwh0
      @wellwh0 Před 3 lety

      @@conniemadden174 Doing also that lately. but on some parts of stick there is oil, while on others isn't, or it just spreads on paper fast so it's again hard to read. But yeah that is a good way.

    • @chrismatteson2337
      @chrismatteson2337 Před rokem

      Just turn it ALL the way around. It can look full, then turn, and the other side might have gaps. They all use 4 and 1/2 quarts.