Sand Content Test ASTM D4381
Vložit
- čas přidán 22. 01. 2022
- Standard Test Method for Sand Content by Volume of Bentonic Slurries
ASTM D4381-84 (Reapproved 1993)
Work Instruction
1. APPARATUS
1.1. Sand-Content set consisting of the following:
1.1.1 Sieve, No. 200 mesh (75 micro meter), 2 in. (50 mm) in diameter
1.1.2 Funnel, to fit screen and glass measuring tube.
1.1.3 Measuring Tube, glass tube should be mark from 0 to 20% by volume.
2. PROCEDURE
2.1 Fill the glass measuring tube to the designated mark with bentonic slurry.
2.2 Add water to the next designated mark.
2.3 Close the mouth of the tube and shake vigorously.
2.4 Pour the mixture into the clean, wet No. 200 mesh (75 micro meter) sieve.
2.5 Discard the liquid which passes through the sieve.
2.6 Add more water to the tube, shake, and pour into the sieve. Repeat until the water which passes through the sieve is clear.
2.7 Wash the sand retained on the sieve to clean any remaining slurry.
2.8 Attach the funnel upside down over the top of the sieve.
2.9 Carefully invert the assembly and insert the tip of the funnel into the mouth of the glass measuring tube.
2.10 With a fine spray of water, wash the sand retained on the sieve back into the measuring tube.
2.11 Allow the sand to settle.
2.12 Read the volume of sand from the graduations on the glass tube as a percent of the volume of bentonic slurry originally added on 2.1.
2.13 Wash and dry all equipment thoroughly after each test.
Thanks for sharing.
You're welcome.
God is good all the time
God bless you
Amen. God bless you too
I hope that there will be more like this video in this channel...
Thank you for this informative video.. God bless.. 😁😁😁
Thank you for the appreciation.
Sir i need this book in pdf file
Sir you can download the ASTM D4381 for free on the internet.
Sir, pano pag reading ng percentage?
Please refer to tools brochure para Sigurado. Iyong pinasa sa akin na picture ay di ko din alam kung paano basahin. Kung saan tumapat ang ibabaw ng buhangin ay iyon na po ang percentage reading.