How to Replace Inner & Outer Wheel Seals 1996-2002 Toyota 4Runner

Buy Now!
New Wheel Seal from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new axle seal on your 1996-2002 Toyota 4Runner. Old, leaky axle seals could let out transmission or differential fluid, which could lead to damage. Replacing a seal is a good idea if its leaking, or whenever you install a new axle.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obhV/1A...
• Pry Bar 1aau.to/oSz/1AX...
• 12mm Wrench 1aau.to/oUS/1AX...
• 10mm Socket 1aau.to/oa7L/1A...
• 12mm Socket 1aau.to/obrs/1A...
• 17mm Socket 1aau.to/obrs/1A...
• 19mm Socket 1aau.to/oafo/1A...
• 21mm Socket 1aau.to/oafo/1A...
• 36mm Socket 1aau.to/ob3/1AA...
• Press
• Channel-Lock Pliers 1aau.to/okv/1AX...
• Needle nose pliers 1aau.to/oCN/1AX...
• Needle nose pliers 1aau.to/oCN/1AX...
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Impact Gun 1aau.to/osm/1AX...
• Ratchet 1aau.to/obyw/1A...
• Socket Driver
• Socket Extensions 1aau.to/obrs/1A...
• Torque Wrench 1aau.to/oaCj/1A...
• Anti-Seize Grease
• Bungee Cord
• Cloth Rags 1aau.to/oBF/1AX...
• Gloves 1aau.to/o2d/1AX...
• Rust Penetrant
• Safety Glasses 1aau.to/oTm/1AX...
• Silicone Paste
• Center Punch 1aau.to/okE/1AX...
• Floor Jack 1aau.to/o3z/1AX...
• Hammer 1aau.to/oTe/1AX...
• Jack Stands 1aau.to/oSf/1AX...
• Pick 1aau.to/oNg/1AX...
• Rubber Mallet 1aau.to/ogF/1AX...
• Vise
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@chriscollison3136]

And I thought my 2nd gen had bad rust. Why wouldn’t you replaced the ball joint to or just waiting for another video. Your videos are hands down the best for my 96’ runner. Very my C appreciation the time and energy you put into all your vids.

[@h20mxracer222]

Great video. Thanks! I slightly damaged my inner seals when replacing my axles. I'm going to replace inner seals when replacing my CV axles since my boots have torn.

[@TRQ]

+H20MXRACER 222 Thanks for watching our video! 1aau.to/m/Shop-TRQ