John on the TM you use the zero mount or offset mount? Also for the 34, the long twist knob that goes through the 34 to the mount do you use that rubber washer on that twist knob
Two years later this motor is going strong czcams.com/users/postUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite
You seem to have an interface somewhere with your live scope setup .my screen never does that. I would try using your noise rejection that might clear up those radar looking lines.
Perspective was a gimmick they added to get sales. You will never see an accomplished angler use it. And as John said 360 is much better for that view.
Get rid of that lower bracket on 360 and put another one up top. Works allot better dont need slack in wires at lower bracket. I got same set up with 360 and bfe brackets.
You make the best videos hands down, they’re very immersive
Awesome!! Go get em my brother 👊👊
Great video thank you. You may be able to clear the noise and still get the detail you want by setting noise reject to high and your gain to 70
Good vid thanks. Almost done mounting my LVS 34. Does the LVS prove that your hydrowave works?
Good info, thanks for the video.
John on the TM you use the zero mount or offset mount? Also for the 34, the long twist knob that goes through the 34 to the mount do you use that rubber washer on that twist knob
Two years later this motor is going strong czcams.com/users/postUgkxBZWgzfpS2Jj7JqIHyaSZjyVHNUgCKCBf Just uploaded a video of it after 2 years. We use it probably a dozen days each year on our small raft.-original review- We got this motor the other day and tested it out. I don't have anything to compare it to, but it seems good to me. It has all the features advertised - the motor housing is metal. We will see how it performs longer term and I will revise this review if needed. Some initial observations:- Good thrust, moves our boat around really well- It comes with a circuit breaker but no switch - so there's no way to kill the motor other than yanking the connection off the battery. I installed an inline switch.- The mount bracket is plastic and I worry it might break- There are a number of plastic parts that I worry about, but the most important ones are metal or some kind of composite
Awesome.....I'm going to have to mount mine to the trolling motor barrel......how is it working out for you
Can you use the lvs34 to mount to the transom forward facing while trolling offshore
What update do you need ? I just put my new transducer on today. I don’t have the very latest one, but updated 3 weeks ago
Hey man! Not sure what it is but mine doesn't do that flashy glitchy stuff. I have a new lsv34 plus and 126 echo map
What is the extra brace on the 360?
You seem to have an interface somewhere with your live scope setup .my screen never does that.
I would try using your noise rejection that might clear up those radar looking lines.
Is it possible to buy a SD card with all the latest updates from Garmin?
So the difference between the plus and the reg.just clarity and range ? Great video just got live scope watched your other vid on ur settings.
Yes, almost twice the range
No matter what I do I can not get mine as clear as yours
Why add it to the side of motor? How does it go into perspective mode?
Is your humminbird drawing artifact on you garmin monitor?
What head unit are you using
Three questions do you feel the cone/beam is as wide as the 32? Also does this do perspective mode? Have you messed with perspective yet?
Same cone angle. Haven’t used perspective because I have 360. 👍🏼
Perspective was a gimmick they added to get sales. You will never see an accomplished angler use it. And as John said 360 is much better for that view.
Do you have any issues with the Garmin staying in its quick disconnect? It seems to move a lot more than my Bird when going down the lake
No problems and I’ve been in some rough stuff
Guy on Ebay sells clips to make sure it doesn't move or fall out.
What is the purpose for having 3 devices on this boat?
Can you explain why you put the ferrite ring by the transducer instead of up by the graph?
I did both. Supposed to help at any connections
@@JohnCrews where did you get another one at? Thanks for the reply. If you only have one where do you suggest putting it?
That interference would drive me 😜. Probably from your 360 but I’m sure you have gotten use to it
I’ve cut off the 360 and still does it. 🤔
@@JohnCrews what about trolling motor transducer? We have all our front transducers off while using the scope.
It’s definitely the trolling motor transducer interference or the transducer on the transom
Mine is shaft mounted and no interference at all.
You have some Cash in Gear bro! Edit… I see you own Missile Baits, business must be good. I’ve never used Missile before.
If you could only have one ...would it be 360 or live scope
Depends on how you like to fish. Livescope probably fir me
Get rid of that lower bracket on 360 and put another one up top. Works allot better dont need slack in wires at lower bracket. I got same set up with 360 and bfe brackets.
I do not have them lines going across like that , that would drive me nuts lol
Do you know where I can find Mega 360 for Ultrex?
The bass tank website
@@stephenhoward6168 Thank you
Also Boat WRX
Why all the flickering noise...?
It's not there in person. It's created by the camera.
The ferrite bead should be installed closer to the connector not to the transducer...
The waves as you call them is not normal. My 34 is does not do this and is clear.
The flashing on the screen is that just interference?
i think thats just how it comes out through a camera lens...like how LED lights look like theyre flickering on video...
Correct it’s mostly the camera speed
Copy that, thanks for the replies.
That’s interference from the mega 360
Damn brother that’s a lot of shit on your boat
That’s interference from other transducers.
That image looks absolutely horrible. My LVS34 on a 126sv looks a lot cleaner.