Ferguson 2 Bottom Plow Restoration
Vložit
- čas přidán 5. 09. 2024
- Ferguson 2-Bottom Plow
Welcome back!
I recently purchased a used Ferguson 2-Bottom Plow and it’s in need of a little TLC. In this video, I’ll be doing just that: inspecting the implement in more detail to see exactly how I can restore it to its best condition in preparation for my long-term goal of planting a food plot.
Our mid-twenties weather dictates getting it done inside, but I’ve got the heater going and a really effective paint stripper to help things along considerably. There’s a lot to be done (i.e. rust removal/paint stripping, cleaning, disassembling, ordering parts, painting, etc.) but I’m up for it and pleased to have you join me.
Feel free to leave a comment if you know of a resource for locating the 2-Bottom Plow hubs mentioned in the video (part numbers: 103211 and 103212).
As always, thanks for watching. Take Care & God Bless.
The Handy Outdoorsman
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com....
Artist: incompetech.com/
Music promoted by Audio Library • Cold Funk - Kevin MacL...
Just bought of these in the uk excellent advice mate
Glad I found you here . I just found the same Ferguson plow you have there for my 8n tractor today . It's still frozen into the ground but won't be long till I get it home !!!
Have to admit that I do not use it much (3 - 4 times0. However, glad I repaired all the issues as when I do use it , it works like it should. Thanks for watching.
@@thehandyoutdoorsman9014 Your welcome !!! Pretty good video .Do you have a video using the plow ??
@@brianpost7801 This is the only video I have using it.. czcams.com/video/MgwpJVjftMs/video.html
I have a Ferguson 2 furrow plough here in New Zealand im restoring.
Your missing quite a few parts off yours . On the coulters there should be scrapers. To keep them free of soil bulid up , a lever to adjust the angle of depth up by the top link mount , etc .
Mine will be painted Ferguson grey as im restoring it to factory condation .
Hell of a job. About to restore one my self. Thanks for the help.
Let me know what shape your Coulter hubs are in, curious if mine were just one of a kind or if others face the same issue. What model/make is your?
I did not even get any with mine. But should not need then I hope. My main plan to restore it is to repaint it. If I luck in to other parts for it I may add latter. I got a 6 foor scraper blade and the 2 bottom plow for $350. No welds so they look good as far as I can tell. Will see how they look onice I clean them up.
I have some old new stock plow points and other items for Ferguson plows if any body is interested
Now that it looks so pretty take your sander and remove all the black paint from the moleboard then take it to sandy ground and plow for about 1/2 hr. to clean it up The mole board has to be shiny to work right. It will not work as intended the way it is. The paint will make it hard to lay the dirt over, it has to be clean. I grew up with using a plow like this, in fact own one now. for what it's worth I am now retired.
So bare metal works best? Would never have thought paint would hinder the moleboards from working correctly. Thanks Gerald for the advice, glad a can of black paint is cheap!.
Love youtube jam packed with brilliant advice (damn😊 them adverts mind)
The dust cover for the coulter blade hub assembly should still available from Massey. It’s the same plow as a MF62. They’re designed to retain the grease and keep the dirt out... I know you probably won’t do much plowing but the hubs themselves are obsolete and it’ll keep them from damage.
Thanks for the information. Your right, don't do much plowing but want to keep things as original as possible.
Where did you find the parts mine is a 12B 2 bottom Ferguson
I have one of these but it is a 14. I ended up taking the cutters off because the brome i was working was so thick that it would not cut and it just packed it up with grass and roots. A shiny moldboard face is best.
May I ask what “brome” is. Ok, that’s two people saying I should have shinny moldbooards, still looking into that.
@@thehandyoutdoorsman9014 Brome is a thick pasture grass used on the high plains and central states for livestock. The shiny moldboard makes it smoother, not that a painted surface is impossible if you have the right soil. Sticky clay will tend to really stick to that face though if there is any sort of roughness.
Mine is a Ferguson 12B 1943 plow
They actually are cutters, they cut the sod so that it does not clog up the plow and to let it turn the sod over evenly.
Ferguson plough, Ferguson gray.
Yes, but how much nicer does it look in 2 colors? (Be honest)
Im looking at a book here in the UK with ferguson plough parts. I have for a new disk and hub assembly. £130 so a lot of money. The company if you look on Google is called old 20 parts and it says world wide delivery. You can get all sorts of plough parts from them
Appreciate the lead on the parts. They do indeed have the hubs, however, as you mentioned a bit expensive with shipping. Thanks for watching!!
If you use a center punch & a small drill bit to make a pilot hole first, the larger drill bit will NEVER dance or move around. And you do not have to grind the pins all the way down to punch & pilot drill them. As a machinist for ten year after going to tech school & a mechanic for forty years, I learn this trick from an old timer. Get you a good punch set at a big box store. I do not have a source for parts, I as hoping you did.
The dished cover is a labyrinth seal to keep dirt out
Makes sense
Pilot holes, get disks cut at lazer place. Easy peasy
Good idea, thanks
Coulter discs on a Ferguson plough should be 16 inch new.
Thanks for the information 👍
Do you have a good machinist with a CNC machine that can make you new hubs?
I am restoring a steel wheel wagon (truck) that had a missing large left-handed wheel nut
Do you know where I can get 2 Coulter wheels Assembly
🙂
I have a plow exactly like that I might be willing to sell.
What's the deal with the plow shares? Thanks.
Parts are available.
Are you referring to the hubs? Please provide a source. Thanks!
What Model Number is this plow? I have one that I need a moldboard for and I don’t know the model.
Erich Mischke I would have to check this weekend as it is on my property 2 hours away.
My plow does not have a model number, however it does have a type stamp (might be the same thing not sure). Type 10-A0-28 made by Ferguson. Hope this helps.
Do you know where I can get 2 Coulter wheels
Try Agri Supply they have a lot of Agriculture parts,some for older moldboard plows,discs,planters etc,and Shoup has a lot also!
I need to find both Coulter Assembly to buy someone to mine off