DTGPRO Thunderbird introduction DTF (DIRECT TO FILM ) PRINTER
Vložit
- čas přidán 9. 02. 2023
- proud to unveil DTGPros Thunderbird Custom Epson p6000/p8000 DTF PRINTER
AVAILABLE NOW dtgpro.com/cicproduct/dtf-pro...
JOIN MY FREE HOW TO GROUP TO FOLLOW ALONG MY DAILY GRIND.
HTTPS://WWW. FACEBOOK.COM/GROUPS/CRAFTINGWITHIRONDESIGNS813 - Jak na to + styl
i see ya moving up in the game. love it 😍
❤🙏🙏🙌🙌
Nice, I just purchased 4 of these for Nikko DTG. I got 2 7890 and 2 7900 Love these printers.
🙌🙌🙌
Nikko unplugged the Red and yellow Plugs from the motherboard for the vacuum because its not necessary if you use good quality film, plus its very loud and annoying. I have ran hundreds of prints without the vaccum and the print head has never touched the film not once on any of my printers. You just need to remove the back cover which is really easy and you will see the plugs, because you will eventually get annoyed by the noise.
Hi Veronica, Can you make a video how you Wet Cap the Print Head? Or can you reply and let me know. Would really Appreciate it.
Hello! I would like to thank you so much. Your videos helped me convert and install my dtf printer P6000. You are the best.
Which Version of Acro Rip software did you use for your P6000
In use DTGRip 10.5
P6000 is the best dtf printer. Very fast
How did you convert the P6000
yayyy congrats on your printer i love mine
Congratulations 🎉🎉 🍾 🥂
tyyyyyyyyyyyyy
Nice,..
Thank you! Cheers!
Is it kinda friendly to those who have used a baser model? We used a prestige A3 dtf single sheet printer and didn’t know a ton about it except that it’s too slow for us. Do you recommend any specific videos or recommendations for easy setup and maintenance/everyday use?
I have this same printer and use DTG Pro inks running 3 white ink cartridges and still not getting vibrant opaque white ink coverage. How is your white ink so vibrant are you using DTG Ink or DTF Ink for the white?
Thank you!
Just checking to see how the Thunderbird was holding up. Have you had any issues and how has the maintenance been.
Thanks
sorry for delayed response amazing in January 2024 i said i was going to deep clean it just for preventative maintenance, havent ran anything but a couple of nozzle cleans here and there since i got it have yet to clean it lol its a work horse
Hi i have one SC P 6000 convert in DTF I would like to know how to get reset ink fleas for my SC P6000? I bought chips usable 3 times once and from the machine to recognize them more I am blocked because of this problem! I also have an F2000 a SC P 5000 and a 3880 !!
so unfortunately there isnt a resetter for the p6000 the thunderbird is a hybrid of p6000 and main board of another printer p5000 is great and 3880 is the most color consistent but slower than the p5000
Hello, new here. But sooo glad I found your channel! Do you prefer dtf printing over eco-solvent printing and screen printing?! Thanks❤️
they each have their strengths but yes i do. i dont need to set a minimum like screen printing, eco solvent is good but you must still cut and weed. no thanks lol its all print powder cure press the easiest method and my shirts still kicking it almost 3 years later
Please What is the acro rip DTF colour arrangement on Epson Surecolor P7000
with acro rip you can choose any color arrangement, it starts from left side of printer to right the order, i usually put cymk in their respective colors and use lc lm for whites and leave other side for back up or fluorescents (can only be done if you have acro rip youll need to change between the two to print regular dtf and fluorescent dtf
What size cartridges does the machine take
700ml
I just bought this and it's been a nightmare with error messages before my first print. Now I get an error just to load the film. Have you had this issue? Also there's about 6" gap between print jobs using Acrorip 11. Any advise would be great.
so you want to load the entire que all at once of every time between jobs that you qued itll leave a piece of extra film. what error message are you getting ? and any dead space on your image? message me on facebook so i can get right back to you.
@@IronDesigns813 I will reply via Facebook. Had the worst customer service from DTFPro. Finally replaced the printer and it’s still not working properly. Apparently they switched printer vendors and printers are not working properly.
Which acro rip version can I use to print DTF with Epson Surecolor P7000
id get 11 but you should be able to run it with 10.5
Thanks so much for this information what is the color arrangements on Surecolor P7000
Can I use Epson Surecolor P7000 for DTF prints
yes
Please What is the acro rip DTF colour arrangement on Epson Surecolor P7000
I converted epson scp8000(same printer) 44 inches wide. Im in europe so no problem with refillable carts with auto reset chips. ive never seen a maintenance tank resetter anywhere in the world for the scp6000. for 2 or 3k its a good deal, but for 10k not so much. 180 day warranty only, so good luck with new print heads every 6 months, i know because thats what i did. my guess is you got it very cheap or free and the rest follow, at full price. I would call brother ernest if i were you.
Good morning I have the epson surecolor p8000 std. is it possible to convert it to dtf?
over year and a half and no major maintenance on the head, :) ive reset the waste tank about 7-8 ... 10 times at most
has anyone experienced ink starvation on the cyan ink on the 7890
ink starvation occurs when the ink is too thick,
when capping station is clogged,
when dampers are clogged,
or when manifold is clogged,
ink carts get clogged and the spigots of the carts gets clogged,
if youre referring to banding, widen the platen gap.
Happy to see p6000 in your shop
I have a little question about speed
Can I know Hou much take time complete 1 miter and wich seting please?
Good morning I have the epson surecolor p8000 std. is it possible to convert it to dtf?
hello absolutely. i believe theres chipless firmware for it
Very nice machine, Thanks for sharing, what RIP did that come with or are you using AcroRIP from your other machines?
It comes with acro rip but I do have acro rip 11 already and using that to run it
Thanks for sharing, I love the vid! Does it have a heated platen?
It doesn’t. Tyyyyyyy
Sad to say, you got scammed. This is an American Epson P6000 sold for $2500 Brand New. Those scammers buy these used for around $500 and replace the American Motherboard which is limited to around 6 refillable cartridge resets and replaced it with the SC-P6000 Chinese motherboard that is unlocked, that only cost around $175. Then they resell them for over $10,000. plus shipping Ridiculous
With the amount of people that tell me this, yet.. no one can help someone else do that.
So many people with dead p6000 yet it’s only 175 to convert like this? Some people prefer to pay the money than to deal with it. While clearly others can’t do it. So each to their own right? I will however say this is ready for you right out of the box everything needed to start within the hour. Also .. they sent it to me for testing and reviews and what they can do to improve :) I didn’t get scammed I got blessed!
So I guess business is booming for you Mother Patty, if you have all the info on the price and locations for the parts and skill to complete the conversion? Please start a channel and share your experience so we can get rid of all these crazy scammers from cheating regular people just trying to make a buck to feed our families....
@@thecomiccircuit that’s the problem they will say all of this yet not teach anyone. Nor help anyone do it. Or charge a kidney to give the info.
I’ve seen getting rid of my printer post … for. r1800 3k and 4000 models 3-5k lol used and clogged. Each to their own tho. I’ve seen people import from China for 1/3 of the price and end up with something they can’t fix or broken and only get their shipping money back or nothing at all.
Also machine 3k plus stand plus carts plus extra chips plus resetters plus the extra tanks plus software it’s a literal get it all in the box transaction.
I’ve converted all mine and I’ll still tell people to do so. I’ve looked for p6000 info and NOT ONE PERSON WILLING TO SHARE ANY INFO … I do an introduction now people want to speak! Why not speak when people ask about p6000 help.. yet chime in in the Thunderbird. 🥴
I’m going to vlog the good the bad and the ugly for those who have one or want one or just support my journey!
Because I’m my circle we build tables and build eachother up. And give rachee all info we learn and test.. not just mouth! Sad that this world just takes the time to chop on people growth.
If you really want to help people then put the info out not just saying it when you’re trying to bash a company. ☺️
@@IronDesigns813 couldn't say it any better...thank you for what you do...its a service to the people...I look forward to you streching those leggs out on that thunderbird i have been eyeing one for purchase for over a year....
🙏🙏 I promise to vlog the good the bad and the ugly not one clean yet 6 days in and still printing like a charm.
What is wet capping?
Where you put fluid in the capping station to keep sponges from drying that little pad that the print head caps to when not in use
@@IronDesigns813 which settings of colour can I use on Epson SC P7000 DTF and which printer will I chose on the DTG acro rip 10.5
@@yomijay3423 send me a pic of your ink configuration
@@IronDesigns813 but the capping Station is sideways on this printer. It does not sit flat like regular printers. I tried to wetcap mine but the cleaning solution just runs down to the bottom end of the sponge. which isn't wetcapping the print head at all. So I'm curious to know if theres another method of doing this.
@@brandonfuller2cool I take a bottle of windex hold paper towels at bottom and just spray windex until all ink is off the capping or at least most of it.
I have had mine for 3 weeks and can’t get it to work. The instructions from dtg sucks and doesn’t give a step by step process. Put on all cartridges and it won’t even show that they are installed. Will have to spend a day on the phone with epson. Spent 15,000 and can’t even print anything or get a clear answer!!!
hi are you still having difficulties? id be happy to assist sorry my notifications were off.
Is it kinda friendly to those who have used a baser model? We used a prestige A3 dtf single sheet printer and didn’t know a ton about it except that it’s too slow for us. Do you recommend any specific videos or recommendations for easy setup and maintenance/everyday use?
Is it kinda friendly to those who have used a baser model? We used a prestige A3 dtf single sheet printer and didn’t know a ton about it except that it’s too slow for us. Do you recommend any specific videos or recommendations for easy setup and maintenance/everyday use?