PMT Tire tubeless mounting | NAMI Klima

Is it possible to mount a PMT tire (10x3" E-Fire) tubeless on a Nami Klima motor?
In this video I will show you how I mount a PMT tire tubless on a Nami Klima motor and some of my thoughts about using it tubeless. Please note that I have not done a test ride yet.
Let me know what you think about it in the comments and if you had the chance to test the PMT tubeless on the Nami Klima.
The 10x3" PMT tires and the TR438 valves are also available in my store:
shop.halbknapp.at

[@peppermint_butler5848]

Impressive

[@frederickoparah1669]

Thanks for the video, this is called a bead blaster.

[@thegreenhansel]

Wie du dich freust 😂❤ megaaa... gratuliere... tyre bazooka 🎉😂

[@SpoutAnger]

Hi, what if you put the inner tube in, do you think it will be easy to inflate?

[@HalbknappEScooterShop]

Yes, I think you can use it with inner tube. I have already seen some workshops using PMT only with inner tube on a Nami Klima.

[@SpoutAnger]

@@HalbknappEScooterShop Do i need to use straight valve?

[@HalbknappEScooterShop]

I would say it will be easier to use a curved valve. It could also work with a straight valve... But I haven't tested it, so these are just guesses.

[@chadware6741]

Good job so many tires are not woth the rubber

[@Tozzaa777]

Are off road tires an option ?

[@HalbknappEScooterShop]

Yes, but it depends on the brand and size. Please check the data if the tire is meant to be mounted on such rim-width.

[@jerrodgamble5686]

I just ordered this pmt tire for my scooter. Is it possible to do it without this bazooka?

[@HalbknappEScooterShop]

I hope you did see the video until the end. I don't recommend 10x3,0" PMT tires to use them tubeless on a NAMI Klima. If you ordered the 10x3,0" tires please use a inner tube, if not it will pop off the rim very easy when riding (experience of an NAMI Klima user that used 10x3,0" PMTs tubeless).
Lucky you if you bought the newest PMT tires that where made especially for the NAMI Klima. Now there are 10x3,5" PMT tires and these you can use tubeless and I think you will not need a tire bazooka to mount them 😉

[@jerrodgamble5686]

I don’t have the Klima so my rims aren’t as wide I don’t think. I got the tire on today and it seems to be working fine. I didn’t need a tire bazooka but I found that if u take the valve stem out and u put air pressure straight into it it will seat easily if u have a decent air compressor