Hi great video. Can you tell me which bolts I need to remove so I can take off the entire record basket assembly? Is it a bolt I see on the pin wheel? Or are there more. I assume the entire unit slides off the shaft??
I don't know if you are still monitoring this video but I have a question. I just purchased a AMI JAJ-200 stereophonic which needs some TLC. But here is my dumb question. It has two amplifiers and two cables from the ton arm but how can it be stereo with just like this one. 1 main speaker and a horn. I thought stereo needed two speakers or 4 in this case.
Great question. I don’t see every comment but I do see yours! The jukebox cabinet itself is mono - you are correct. It is all set up to be stereo but it requires remote speakers to be used for actual stereo sound.
Hiya there, is there a reset button for this jukebox? We were using it normally, and then suddenly it starts making a continuous cranking noise, the coin mechanism works fine yet the turntable is constantly moving and it won't select any new songs. Even when flicking the switch to scan, or the other option, it also makes this cranking noise continuously. Any help would be appreciated. Thanks!
If it is off only a little bit, there are 3 screws on the front of the rotating drum of the now playing indicator. Loosen those screws and adjust the drum to line up with the correct record selection. If it is off by a lot, there is a shaft connecting the play indicator to the motor that turns the record holder basket. The motor and shaft are connected together with a rubber coupler. Loosen one of the hose clamps that is holding the coupler until you can freely turn the shaft and rotate it until the playing indicator lines up with the correct record playing. Tighten up the clamp on the coupler and fine tune the setting from the front adjustment if necessary.
@@NIXONGarage sadly I've seen that the windows is showing the wrong record again... This happened after some days again and I'm wondering why... I looked into the box but I found no reason so far....
This J is nice, but he still has some problems ... The mechanical cover is missing ... The selections have to be fixed, since the new letter is triggered on 20 and not on 1 ... Then why do you press eject immediately removing the disc? The audio is not working? Or is it because they can remove audio due to copyright? Greetings Armando.
Thanks for the vid. Some box’s are now sold set to free play, could you explain how this works on the AMI J…….
Hi great video.
Can you tell me which bolts I need to remove so I can take off the entire record basket assembly? Is it a bolt I see on the pin wheel? Or are there more. I assume the entire unit slides off the shaft??
I don't know if you are still monitoring this video but I have a question. I just purchased a AMI JAJ-200 stereophonic which needs some TLC. But here is my dumb question. It has two amplifiers and two cables from the ton arm but how can it be stereo with just like this one. 1 main speaker and a horn. I thought stereo needed two speakers or 4 in this case.
Great question. I don’t see every comment but I do see yours!
The jukebox cabinet itself is mono - you are correct. It is all set up to be stereo but it requires remote speakers to be used for actual stereo sound.
Hiya there, is there a reset button for this jukebox? We were using it normally, and then suddenly it starts making a continuous cranking noise, the coin mechanism works fine yet the turntable is constantly moving and it won't select any new songs. Even when flicking the switch to scan, or the other option, it also makes this cranking noise continuously. Any help would be appreciated. Thanks!
Hey Nixon Garage. How did you adjust the "now playing" indicator? You mentioned that it was showing the wrong number! Thanks
If it is off only a little bit, there are 3 screws on the front of the rotating drum of the now playing indicator. Loosen those screws and adjust the drum to line up with the correct record selection. If it is off by a lot, there is a shaft connecting the play indicator to the motor that turns the record holder basket. The motor and shaft are connected together with a rubber coupler. Loosen one of the hose clamps that is holding the coupler until you can freely turn the shaft and rotate it until the playing indicator lines up with the correct record playing. Tighten up the clamp on the coupler and fine tune the setting from the front adjustment if necessary.
Thanks a lot @@NIXONGarage I appreciate your help and found the screws and fixed it! Amazing!
Wonderful! Glad you fixed it!
@@NIXONGarage sadly I've seen that the windows is showing the wrong record again... This happened after some days again and I'm wondering why... I looked into the box but I found no reason so far....
Try tightening the hose clamps on the rubber coupling between the record basket motor and the record playing indicator
This J is nice, but he still has some problems ... The mechanical cover is missing ... The selections have to be fixed, since the new letter is triggered on 20 and not on 1 ... Then why do you press eject immediately removing the disc? The audio is not working? Or is it because they can remove audio due to copyright? Greetings Armando.
pity you can't play the record anymore on utube because of copy rights 😮