Low Beam Not Working-ZBR Failure! MAN Tgs
Vložit
- čas přidán 7. 09. 2024
- This is what you can do when you don't have another ZBR computer..
Mounting an relay for the low beam.
LINKS:
24V Relays: s.click.aliexp...
12V Relays: s.click.aliexp...
Relais Socket: s.click.aliexp... - Auta a dopravní prostředky
❤❤❤
Good
Please can you explain the ignition system in man tgs because one of my snrs said the wire goes to the edc unit before it goes to the starter motor?
Hello there.Yes it's true.From the ignition the wire goes to the FFR and from there a wire 50300 or 51300 goes to the edc on the engine..And in the end to the starter.You can bypass the edc.Example: you mount a wire from 50300 directly to the small coil of the starter
The edc will not let you to start if the N it's shown on the instrument cluster.
@@RelectrikRepairs thanks
Having you will be very helpful to me as an apprentice
Hello good day ask you something heater not working what remedy can i do thanks
Do one video of actros
Hi does the man truck use numbers on wire instead of color code
@@johnmacharia4154 All MAN trucks have codes/numbers on wires.And they use 3 colours most..brown for the ground, white and pink.
Hope you answer me
Hello.There are multiple reasons for that,but you can check my channel.There are many videos with this topic.Air heaters!