Code 25 is for alternator not charging and or low battery voltage...this is one way to get you by in an emergency situation, especially like if you're already loaded with a very temp sensitive product.
Hi I had the same problem and I put a new alternator and new battery but same code is coming up that’s code 25 . And the new battery died too how do I check if the wiring is loose or mybe it’s just a fuse ? What do u think
Make sure it's the correct alternator...you should get a code for a fuse....make sure idler pulley is readjusted so belts are not slipping.. or use jumper cables until you get to a Thermoking shop.
Check to be sure the belt is tight by adjusting the idler. If the belt is tight. Use a volt meter to be sure you have voltage going to the alternator by unplugging the alternator 2a wire which is the big plug on the alternator be sure you have voltage going to both wires inside the plug
Juan sorry I just saw this message...was that an alternator code.. let me check!!......ok yeah alternator.....I stopped by Thermo-king of Greenville SC and bought a new one and I installed it on their property.
@@juanfigueroa6740 Good deal.... I'm so glad I could help you... Don't forget to share my videos if you feel up to it..... thanks again...Be safe out there!!
I need help with a s600 code 615, rail pressure fault. .goes into high speed for about 5 seconds fine. Then force to low speed. I replaces the fuel pump and fuel filter... still didn't help. Any help is greatly appreciated. Head pressure was at 300ish. Suction around 45 is. Ambient 100 or so
Thank goodness for your video got the same problem, did it and it worked 🙏🙏🙏
Thank you very much my friend,go the same code,bought the cables and problem solved.
Again thank you for been so informative also with the gauges.
Am I good to drive while this code is on ??? Everything works perfectly.
This video saved me, 🙏
Do I need to keep running the truck as long as my unit is running on the jumper cables?
Hi I had the same problem and I put a new alternator and new battery but same code is coming up that’s code 25 . And the new battery died too how do I check if the wiring is loose or mybe it’s just a fuse ? What do u think
Make sure it's the correct alternator...you should get a code for a fuse....make sure idler pulley is readjusted so belts are not slipping.. or use jumper cables until you get to a Thermoking shop.
Check to be sure the belt is tight by adjusting the idler. If the belt is tight. Use a volt meter to be sure you have voltage going to the alternator by unplugging the alternator 2a wire which is the big plug on the alternator be sure you have voltage going to both wires inside the plug
Mohammed Yusuf did you fix your problem because my reefer is doing the same thing
Did you find out the problem??I'm going throu same issue now, I got the same unit , precedent thermo king!
Juan sorry I just saw this message...was that an alternator code.. let me check!!......ok yeah alternator.....I stopped by Thermo-king of Greenville SC and bought a new one and I installed it on their property.
But you can keep the unit running using jumper cables until you get a new one or get th e load off.
@@deewheels3146 yes brother I did exactly what you did with your cables, thanks a bunch, your video helped me a bunch!!
@@juanfigueroa6740 Good deal.... I'm so glad I could help you... Don't forget to share my videos if you feel up to it..... thanks again...Be safe out there!!
@@deewheels3146 yes brother shure will, gos bless you to!👋
I need help with a s600 code 615, rail pressure fault. .goes into high speed for about 5 seconds fine. Then force to low speed. I replaces the fuel pump and fuel filter... still didn't help. Any help is greatly appreciated. Head pressure was at 300ish. Suction around 45 is. Ambient 100 or so