How to clear all reefer codes (Guarded Access)

Sdílet
Vložit
  • čas přidán 25. 08. 2024

Komentáře • 41

  • @dougreum
    @dougreum Před 6 měsíci

    Thanks ! This is my first reefer rental as an owner operator and I guess I was playing with the sentry vs continous mode too much -;threw a sensor warning and the ThermoKing , "T", went amber color.
    Anyway after watching your video I was able to clear the alarm ! Thank you so much & GOD Bl3$$ you ! You saved me from get raked over by the ThermoKing service shop tomorrow morning !

  • @JTMAR379
    @JTMAR379 Před rokem

    Manual defrost. When hot gas from the compressor goes to the evaperater coil and melts the frost or ice. When that happens the evaperater section of the unit is completely closed off from the cargo area by a small shutter door where the air goes into the chute. To prevent warm air from going into the cargo area. The melted frost drains out of the unit and onto the ground though the drain tubes. I've loved these units sense I was a teenager back in the 80s. And it keeped me on the straight and narrow. I have one person to thank for that!!🥶😇THERMOKING 4 LIFE💙

  • @sumeshac110
    @sumeshac110 Před 3 lety +2

    Sir I am reefer technician thanks for this video very very useful

  • @automan29
    @automan29 Před 2 lety +2

    Thank you! Working on an SB-110 and you saved me a ton of time

  • @stephenhernandez4403
    @stephenhernandez4403 Před 2 lety

    Thank you so much sir your video really help me out truck driver from Southern California🚛🚛

  • @TheYousbm
    @TheYousbm Před 17 dny

    Thank u so much, it saves my day

  • @williemiller7399
    @williemiller7399 Před 3 lety +2

    This was just a life saver! Thank you!

  • @EduardoSilva-xe3gp
    @EduardoSilva-xe3gp Před 2 měsíci

    How do you change the defrost timer? On Carrier you can change it to every hour or every 2 hours or whatever but on this thermo king i can't find it

  • @christopherhayles2393
    @christopherhayles2393 Před 3 lety +2

    Great information

  • @mariocamo8834
    @mariocamo8834 Před 3 měsíci

    Very helpful video

  • @PlateKnight10
    @PlateKnight10 Před rokem

    Thanks for sharing, this is informative 👍

  • @bigjoe1077
    @bigjoe1077 Před rokem

    Good information brother

  • @miguelbatista7413
    @miguelbatista7413 Před 3 lety +1

    Thanks a lot bro.

  • @AG-sb7pu
    @AG-sb7pu Před 10 měsíci

    Thank you 🙏

  • @mohammadyounas7566
    @mohammadyounas7566 Před 3 lety +1

    Sir it has acces guarded code i don't know

  • @rickblaga9287
    @rickblaga9287 Před 3 lety

    Please help, SB 330 - SR3 - holds 32 degrees PERFECT, but when I set to 33* it always holds it around 35 to 37 degrees

    • @fnfastone
      @fnfastone Před 2 lety

      I have an SB 330 with the same issue. I went to Thermo king to have it looked at and the tech said there's nothing wrong and that is just how they're programmed.

  • @mohammadyounas7566
    @mohammadyounas7566 Před 3 lety

    Thanks for information how we can clear alarm 12 sensor shutdown

    • @edwinrobert1959
      @edwinrobert1959 Před 3 lety

      i know it is pretty off topic but does anybody know of a good site to stream newly released movies online ?

    • @jackjacob5169
      @jackjacob5169 Před 3 lety

      @Edwin Robert I watch on FlixZone. You can find it by googling :)

    • @malakairiley8466
      @malakairiley8466 Před 3 lety

      @Jack Jacob Definitely, I've been watching on FlixZone for since march myself :D

    • @edwinrobert1959
      @edwinrobert1959 Před 3 lety

      @Jack Jacob thanks, I went there and it seems like they got a lot of movies there =) I really appreciate it!

    • @jackjacob5169
      @jackjacob5169 Před 3 lety

      @Edwin Robert You are welcome :D

  • @joelgonzalez7184
    @joelgonzalez7184 Před 2 lety

    GAURDED ACCESS NOT AVAILABLE
    is what mine says. Can't do anything else and the reefer runs continuous with Optiset Plus enabled and can't turn it off.

  • @christopherhayles2393
    @christopherhayles2393 Před 3 lety +1

    Do your videos in a more quite area

  • @sweetmayara
    @sweetmayara Před 2 lety

    Sir please help me with al 52 .how to reset this alarm.

  • @davidscherp10
    @davidscherp10 Před 2 lety +1

    you shouldn't be in any programmable settings. if you have a code that needs to be cleared through guarded access, there's an issue. call a tech.

  • @user-dy5dw4yp7b
    @user-dy5dw4yp7b Před 2 lety

    Wow

  • @mohammadyounas7566
    @mohammadyounas7566 Před 3 lety +1

    Sir how we can clear alarm 12 sensor shutdown

  • @user-ck4jn8fl1x
    @user-ck4jn8fl1x Před rokem

    More details possible

  • @rajwindersingh518
    @rajwindersingh518 Před 9 měsíci

    How to reset brother 4/204/11 code

  • @charlesdaddey8125
    @charlesdaddey8125 Před 9 měsíci

    How to change language back to English

  • @kasmirkhanmalik6114
    @kasmirkhanmalik6114 Před rokem

    sir 26 code problem

  • @MBT433
    @MBT433 Před 3 lety +1

    Ciao come agiustare data ore minuti grazie.

  • @saidali5525
    @saidali5525 Před 11 měsíci

    4

  • @nizomjuraev3256
    @nizomjuraev3256 Před 3 lety

    Доброго времени суток уважаемый можно ли еше раз объяснить на русском языке. Заранее блогодаю.

  • @bauhuyle5571
    @bauhuyle5571 Před 3 lety

    ALARM3