Building the XTRA SPEED Heavy Duty Vehicle Trailer | Step-by-Step Tutorial
Vložit
- čas přidán 25. 07. 2024
- If you are looking for an affordable, easy-to-build, and scale-looking trailer, then you may have found the trailer you've been looking for! This Heavy Duty trailer from Xtra Speed is made entirely out of metal, and has great features that make it capable off-road.
This video is designed to help YOU along the way during the build process. Keep in mind that this trailer is NOT assembled when you receive it. Since the instructions included with the kit are not very in-depth, this video offers an easy, and detailed, step-by-step instruction on how to assemble this trailer. If you have any questions, please comment below!
Products in this video:
Trailer from Xtra Speed
www.amainhobbies.com/xtra-spe...
Hitch from Yeah Racing
www.amainhobbies.com/yeah-rac...
TRX-4 Sport from Traxxas
www.amainhobbies.com/traxxas-...
Timestamps
00:00-01:40 Intro
01:40-03:12 Step 1, Tires & Wheels
03:12-06:46 Step 2, Suspension & Axles
06:46-09:36 Step 3, Tongue & Hitch
09:36-13:48 Step 4, Lighting & Final Touches
DISCLAIMER: The RC Genius CZcams channel displays products and models intended for ages 14 years of age and older. All products shown in the content on this channel are marked as "Not a Toy", and "For Ages 14 & Up". The RC Genius is NOT responsible for persons under the age of 13 who fraudulently claim to be over age 13. The RC Genius acknowledges the COPPA laws and request viewers honor the age requirements. - Auta a dopravní prostředky
How does it connect to the hitch? I'm looking at the connector on the trailer and I don't understand how that holds onto the ball hitch.
Im also trying to figure that out
I just got this trailer. Here is how it works, the trailer hitch that comes with this trailer has both, the hitch for your car, and the part for the trailer.
The part for the trailer has a metal piece inside that has 2 pass thru bolts. When hooking to your car, you unscrew the bolt closer to the ball that's on the hitch on your car and the metal part in the trailer falls down allowing you to mount it onto the ball. Once in, you have to push the hanging metal latch back into position and pass the 2nd bolt thru. That's what keeps the trailer attached. Hope that helps.
I just put mine together today. Thanks for sharing this video, it made it that much easier.
Thanks Man. This video will definitely be helpful when I assemble mine. It will certainly save me time and that's valuable to me.
Sweet video was lost in my build twice you definitely came to the rescue
Wouldnt you want the wire hole in the electric box on the bottom to run the electric out the back on the bottom?
Awesome video thank you so much
Thank you. Mines came with no instructions
Thank you for this, mine was a Racers edge pro series RCEPRO1500 but was almost identical to yours. Your tutorial was very helpful as my instructions were even worse than yours. One comment I have is it is easier to put the hitch in first before the jack. My jack was not exactly like yours, it doesn't work very well without holding the bottom from spinning but otherwise great job!
Cool trailer and build
Thanks for watching man 👊
Thank You so much man!!! This video saved my life!!! Could you help me with one thing? I want to get silver or white wheel’s. I don’t care about the style as long as they fit the hubs…..can I use larger tires too? Any set of wheels and tires you recommend they are silver or white? Thank you!!!
Great video. Thank you. Unfortunately my trailer arrived without the light sockets... ergh. waiting on resolution.
Did you have any trouble mounting the wheels on the axles? It’s as if I have the wrong hubs ? Any ideas?
Thank you x INFINITY. I acquired one of these kits with minimum printed instruction. Just a few (6) very poor images. Nothing about the assembly of the wheels. First time to see wheels of this type in a RC model, over a 50+ years of RC model builds.
Where did u get the yellow truck at the end?
The yellow crawler is a TRX-4 kit from Traxxas. I built it and the body is custom from Pro-Line. I have a build series on my channel.
Not sure how the leds stay in.. i saw another video using glue?
The lights could be glued in. I found that they are fine when secured with a zip tie.
@@TheRCGenius i ended up glueing but.. thanks for the video! Very helpful.
Net weight 30kg? This is neither the weight of the trailer nor will it take 30kg load. I have it from the brand Amewi by the way.
Yeah, about $300 will get you that
your link is broken to trailer site. what kind of genious are ya lol jk amain link dosent work.
omg the wheels are AWFUL to put on
Do the locknuts just glide against the hub? I only see one bearing?