Adding Door Warning lights to a VW GOLF MK7/7.5 retrofit/install
Vložit
- čas přidán 24. 08. 2024
- Adding Door Warning lights to a VW GOLF MK7/7.5
While I installed on a golf it should be similar on the following and other VAG cars like Audi and Skoda.
If you have a purple and blue cable in pin 16 already this is to the door sill lights, you can splice into that to have both door sill and door warning.
This is for the front, I’m looking into the rears because they are different.
VW Teramont 2017-
VW Touareg 2011-2019
VW CC 2009-2019
VW T-ROC 2014-2019
VW Arteon 2017-
VW Phideon 2016-2019
VW Sharan 2012-2019
VW Magotan 2007-2019
VW Passat 2005-2020
VW Golf 2010-2020
VW Sagitar 2006-2017
VW Tiguan 2010-2017
VW EOS 2008-2015
VW Scirocco 2009-2017
VW Jetta 2006-2014
VW Touran 2016-2018
How would you ground to the car instead of cutting any OEM wires? Pin 5 alternative is what I am after. Please
I don’t get it, why is everyone showing the front door, what about the Rear????
The rear on a golf doesn’t have a door control module unlike the A3. There is no easy factory like way to do it.
@@andygardner3177 I did it like some say but still have 5v coming to the door after door closed. It does not drain the battery if driving everyday but if I leave the car for a week it may drain the battery. I will need to install a 12v regulator.
So if i have the sill light id need to tap into that instead of pinning it to the plug itself?
Yeah and you won’t need to do the coding as it’s the same output. 🙂 I can send you the wiring diagram if you comment something I can contact you on
@@andygardner3177 , sorry to butt in, but any chance I could get my hands on these drawings you speak of.
@@jackvettese2617 mrpandygardner is my Instagram
Hi mate, is your logo blue and white or black and white? I prefer black and white. If you have the link can you send it pls
Hello are the pins the same for be eos 2007
I don’t know to be honest for a 07 EOS, might not have a door control module at all.
Can you use vcds lite
Hi are the pins the same for vw eos 2007 ?
hi, I have a question, do you need just the carista app for to apply the upgrade? Or do you need both, by the way carista app and vcds? . I have another question, the carista app , is con crédit or free?.
Thanks !
Hi you can use either VCDS or carista. No need for both 😀 you have to pay for carista
I'm in birmingham. Could you help me install these lights?
Tried your instagram handle but not found.
Lights only work at night ?
They work all the time but can’t be seen in the day.
Thanks for the video mate, Is there anywhere you can go to get this done? I just don’t trust myself haha!
Are you anywhere near notts or brum in the UK
@@andygardner3177 I’m Essex so about 2 hours away, i don’t mind a drive though!
@@bootlegnation1948 happy to help add me on Instagram?
@@andygardner3177 really?! That would be quality! Thankyou mate 👍🏻 what’s your username?
@@bootlegnation1948 mrpandygardner
Could you not make a proper video instead of just a couple pictures
Will do if I do another one. I only made these because so many people asked for help
It would also help if you could share the purchase link
You didn't help🎉@@andygardner3177
@@brandolino55 what’s the issue sorry? I’m not a professional at this it’s just a hobby and I was trying to help people, just uploaded this rather than sending loads of pictures of the forum.
Video is not usafle😂
Sorry I don’t understand what you mean by usafle?
never use the blue and red scotch block !!! always solder!
I partly agree and it’s certainly a more reliable connection, but it excludes people and it’s easy to make a mess of especially if your forced to do it in midair etc. I’m okay at soldering but for car electrics I often chose connection blocks or repinning adding to wires two the connector. People sometimes want to be able to remove mods without stuff being super visible as well.
what a useless video “watch another video to see what to do”
Assuming you mean about the coding via VCDS. I created this video to help a single person on a forum. This isn’t my job or anything just trying to help people. Sorry I couldn’t help let me know if you have any questions.