Problem Motor! It Won't Start - How To │ Ezeetrade Racing
Vložit
- čas přidán 25. 08. 2024
- Customer brought in a car that he just bought second hand and 5min in running it stopper and won't start again. Let's trouble shoot to find the problem.
Hopefully some of us can learn something new together.
The Car: Rovan 5B
Motor: Rovan 29cc Stock
Pipe: Rovan Dragonfy aka Dominator Gen.2
Our Website: www.ezeetrade.co.za
#rccar #fithscale #baja5b
That engine has had loads more then 5mins on running time awesome video bro love what you do it’s awesome
Thanks man. Basically the guy bought it second hand and only got to play 5min.
We'll keep bringing it!
It was the Half Moon pin for the flywell it Sheared completely in half which made the timing off
Sometimes there is not enough time going into assembly then it costs people so much more. Thanks for watching.
wow this guy knows his stuff..amazing!
Thanks bud
Great Video man, hey lekker Pieter jou yater!
Thanks Francois!
Chique amigo top automodelos!!!
obrigada. fique atento para mais.
I have experienced it. Both had problems with the ignition system. I suspect that a spark plug issue will probably cause a short circuit that will stress the module and cause it to fail. In such a case, the engine suddenly died even though it was running normally until just before, and it will not start at all.
If the engine still turns and her was no major dust sucked into it, what I will do #1 is change the plug.
If that doesn't work then I will take the head off and check the ring.
love those repair video bro
Thank you so much. I really appreciate the support.
Goie werk Ryno,Ek volg jou uit Canada 🇨🇦 Basil
Thanks boet! Hoop dis informative.
Great video bro
Thanks bud
Nice video, and great to see you can fix an engine problem like that.
So I was wondering I have a 1:1 "baja", may have some engine issues. Could the Baja expert have a look 🤔??
Thanks - Rebuilt my Baja motor 2011 and have done 100s since.
In regards to your 1:1 scale - I doubt its a 2-stroke. Hahahaha. I'm afraid my view will be the same as the layman. My expertise is limited to 5th Scale. I'd be happy to have a look though. 😎
I’m having issues with my redcat buggy 2stroke it’s stressing me out sometimes it will run then bog mid high rpm and just not work for like 3-4days untill I come back. It runs amazing hits rpm does everything it should but after it won’t start the first 3 pumps after bogging down…it also won’t start a 70% of the time within the first three pull even fighting up the idle a wee bit to get airflow when starting it still nothing …I’m frustrated and trying my best and it’s annoying
Howzit man.
So number one. Have you seen our carb tuning vid?
I can't stress this tuning tip enough. Idle screw all the way in and then.set the idle with your LEN(Low End Needle). Also, always make sure your filter is clean and oil it with 2stroke not air filter oil
Awesome video very informative and great tips ✌️🤘
Thanks man! Will keep them coming
@@EZR cool brotha
bro,i just one small help from ur experience,my baja 1/5 petrol 29cc,before incident happen its was losing power after that it wont start and i try to change carburettor and it wont 10minit after that same thing happen loss power,now cant start also.i already change coil,pulg,filter gas,carburettor.I need you help brother
Hello. Thanks for reaching out. Have you opened her up yet? Slow power loss is wear and tear inside. I will check the piston ring. Could just need a new ring.
thanks for reply,How to check ring?
You will have remove the cylinder. Then take the ring off the piston. Stick it back in the cylinder and push it up a little using the piston. Then check the ring gap. Shouldn't be more than 1mm
My 23 CC engine will only run very lean settings, and on very lean settings it will not rev, instead, it will die and it will not run at factory settings, and if it does run runs for a short period of time and then conks out
@@elidunk8989 have you recently changed carb manifolds or gaskets? It is not very common for a car to only run when lean. My first thought is vacuum hole on the manifold. Is it open all the way through?
@@EZR thank you very much. The problem seems to have fixed itself slightly, but I’m unable to run the car for a week or so so I will see how it runs after that and if I have any problems I will message you on CZcams if that is okay, thank you for your help so far it’s much appreciated.
@@elidunk8989 my pleasure..anytime
Hi mate.
Was running my hpi blackout mt and it cut out, when checked pull start was siezed, took it apart and flywheel sometimes turns and sometimes siezes again, got spark and fuel, when turning by hard seems free the stuck solid next couple of turns, any ideas if you can help? Keep up good work.. Thanks 👍
As soon as it gets stuck or something sounds off like in this video I would not turn the motor again. Most of the time that motors get stuck like that is the coil that came loose. Best way to check if it is internal issue, is to take the fan cover off and the clutch bell. Check that the coil is running free and the clutch. If they are then its internal issues.
How do you take the spur gear off
It has a 7mm E-Clip that holds it, that's it. If it still doesn't come off, its stuck and you gonna need some force. It normally just slides on and off.
My Baja is very stable, starting immediately with one or two pull starts after choking.
That's where you want it. Smooth. Keep it lubed and she will be happy for years
At 9:44 it’s running nice
Very good performance from this combination.
When he keeps the throttle down the revs just keep climbing.
Hi. I have a problem with my rovan, I was running it couple weeks ago, I didn't notice the grass was wet and there was some water I believe that was the problem, but know it's pretty hard to get it on, and keep it running, when I press the gas doesn't run and just sound like shoots of smoke, if I don't press gas just turn off, any idea what's the problem?
Water won't really cause this problem. Have you checked out our video on tuning?
The heavy smoke suggests carburetor problem.
@@EZR so do you think i have to remplace the carburetor? Or just clean?
If you have applied all the tips I gave in our tuning video, then a carb service or replacement will be the next thing I would do.
Comes on the gas quite nicely
Yeah! From dead to contender is 3hrs. Plus lots of talking in between :-D
@@EZR lol. U mean persuasion hehe
What's up butt pressing here coming to you from the US have a one fiscal Baja purchase a brand new $15 carburetor LOL installed it and it still won't start think you can help me out ?
1/5 scale
Howzit! So so sorry I missed this comment. I love to help!
There are actually a few things it could be but really hope it's sorted now. If so share with me what it was my first thought would be to check sparkplug then the ring.
Looks like the previous owner didn’t mix it with enough oil they need to run at 25:1 not 40:1 or 50:1. 👍🤛😎
People do all kinds of wierd things thinking it will better performance. Not mixing enough oil is one of them.
@@EZRhey i bought an rovan 5B today.. what is the best mixture? 1:25 or 1:50..
@@bakkiepleur_FPV Definitely 1:25
40ml oil to 1litre fuel
How to buy parts india
Good Day. I am not sure who can send to India. We are working on exporting but still far away.
👍subded
Whaaaazzzzup Jose. Thank you so so much. I appreciate it and hope to bring you more awesomeness very soon 😁
More like 5 gallons lol that thing was filthy
Some folks think these motors run on any 2 stroke oil unfortunately. But luckily that Baja is in very good hands now. 🤲