I've contacted h-rat to find out the situation. It appears that his account was reported, leading to restrictions on his GitHub account. As a result, all his projects are currently hidden on GitHub. However, you can still access his work through his GitLab page: gitlab.com/h-rat/
Custom modifications will be necessary to make it more compact. Oz recently released a PCB featuring the CC1101, IR, and a MicroSD Card, which might inspire you.
Sure, but before that, make sure you have the CC1101 module v2.0 and double-check the wiring from your module's data sheet 🙏. Then, let's focus on the connections, as the colours are less important (on the left are the CC1101 connections and on the right are the LILYGO module connections): CSN 1 MISO 2 MOSI 3 SCK 43 GDO0 44 3V3 => 2 pins are available GND => 5 pins are available
Thank you for this walk-through. I've been searching online for a few months and now you have posted answers that I needed. The only question remains: Does ROLLING-PWN work on this device as you have set it up?
Glad it was helpful! Thank your your message. For now the rolling-pwn, I didn’t tried as it not included. Only Rolljam and Rollback attack are implemented here. May be this is a feature you could request to h-rat.
I wish I could answer but best will be to ask to h-rat. Most likely developpement need to be done in order to modify the interface from touchscreen to include the dial input.
Thanks! I'm encountering a 404 error, and I've already notified h-rat regarding the issue. However the firmware was not available on GitHub. You could buy it here willyfirmware.mysellix.io
Thanks! I'm encountering a 404 error, and I've already notified h-rat regarding the issue. However the firmware was not available on GitHub. You could buy it here willyfirmware.mysellix.io
Hi Sam, Really love your channel, one question, I bought a wrong Lilygo S3 Dev Board, I bought the v.01 dev board display S3, I believe its not have touch display, Am I still can use it?? Ohh man.. what a sloppy me 😅😅😅🤣🤣
First of all, thank you 🙏. Unfortunately, you won't be able to navigate through the menu with your current unit. I suggest contacting the seller, as they might be able to exchange it; the shopping interface can sometimes be misleading on some online store. I made several mistakes myself too😅. I hope you'll be able to try Willy's firmware soon 🙌.
Thank you for pointing that out! I overlooked adding the GitHub link in the description. Here's the link for you. github.com/h-RAT/Willy_Firmware_CC1101_ESP32_Display_Touchscreen
Je viens d'acheter la version pro de T-Display-S3 avec la coque Mais malhereusement le firmware Willy est payant désormais 😢 impossible de le tester sur le Lilygo T-display-S3 Pro
Je ne connaissais pas cette variante. C’est très intéressant, le produit est mieux fini. Le mieux serait de contacter h-rat pour voir ce qui est faisable avec lui. C’est vrai que cela peut s’apparenter à une limitation d’être compatible avec seulement un module. Je suis preneur de la suite des informations 🙏
Hey, si j'ai l'occasion d'essayer les S3 Pro alors je serais ravi d'implémenter le firmware dessus. Cependant, l'avantage des S3 "normal" est l'utilisation des shield, ce qui permet de pouvoir y souder plus ou moins n'importe quelle module, sur les S3 Pro impossible. Donc oui le produit est mieux fini, dans l'état, mais je serais curieux de voir comment y placer proprement un module CC1101 par exemple. (Il faut que cela reste assez "facile" pour tout le monde) Pour les utilisateurs actuels, n'hésitez pas à m'envoyer un message pour obtenir les plans 3D disponible pour la board S3 "normal". ✌
I'm happy to see that the tutorial has been helpful to you. Based on my understanding, you'll require two distinct shields to separate the IR and sub-GHz components. Otherwise, the PCB will become overly crowded with both IR parts and the cc1101. Currently, I'm still in the prototyping phase, awaiting the printing of a case and the acquisition of a micro SD card.
Haha, not every French person speaks like Officer Crabtree, but I’m flattered to hear my accent gives you a good laugh! I wasn’t familiar with the show, but it’s great to know I can bring some hearty laughter just by chatting. 😄
Il n'y a plus de kit complet disponible, mais tu peux commander le matériel sur Amazon ou AliExpress, et obtenir le firmware directement auprès du développeur ici willyfirmware.mysellix.io/product/64ca6015d3acc
I've contacted h-rat to find out the situation. It appears that his account was reported, leading to restrictions on his GitHub account. As a result, all his projects are currently hidden on GitHub. However, you can still access his work through his GitLab page: gitlab.com/h-rat/
He is just an asshole that decided to sell his software when he noticed people liked.
the Link is working fine, Thank you Guy
Need to get this so start working on making it thinner and having an external antenna
Custom modifications will be necessary to make it more compact. Oz recently released a PCB featuring the CC1101, IR, and a MicroSD Card, which might inspire you.
Already made a nice case for it 😅
12:59 can you give all the breadboard wire colour and which gpio pin you connected it to
Sure, but before that, make sure you have the CC1101 module v2.0 and double-check the wiring from your module's data sheet 🙏. Then, let's focus on the connections, as the colours are less important (on the left are the CC1101 connections and on the right are the LILYGO module connections):
CSN 1
MISO 2
MOSI 3
SCK 43
GDO0 44
3V3 => 2 pins are available
GND => 5 pins are available
Thank you for this walk-through. I've been searching online for a few months and now you have posted answers that I needed. The only question remains: Does ROLLING-PWN work on this device as you have set it up?
Glad it was helpful! Thank your your message. For now the rolling-pwn, I didn’t tried as it not included. Only Rolljam and Rollback attack are implemented here. May be this is a feature you could request to h-rat.
Thank you!@@samxplogs
@@tartgreenapple Hey, rolling-pwn and rollback are the same attack. 👌
Can you do this on T-EMBED?? It's also esp32 - s based but with a dial and a button
I wish I could answer but best will be to ask to h-rat. Most likely developpement need to be done in order to modify the interface from touchscreen to include the dial input.
💯💯💯
Nice ❤👍💯
Thanks 🔥
can you upload web interface, the link are down
Thanks! I'm encountering a 404 error, and I've already notified h-rat regarding the issue. However the firmware was not available on GitHub. You could buy it here
willyfirmware.mysellix.io
Hello nice video. I have a question where i can find the firmware when i open github there is empty error of the page
Thanks! I'm encountering a 404 error, and I've already notified h-rat regarding the issue. However the firmware was not available on GitHub. You could buy it here
willyfirmware.mysellix.io
Hi Sam, Really love your channel, one question, I bought a wrong Lilygo S3 Dev Board, I bought the v.01 dev board display S3, I believe its not have touch display, Am I still can use it?? Ohh man.. what a sloppy me 😅😅😅🤣🤣
First of all, thank you 🙏. Unfortunately, you won't be able to navigate through the menu with your current unit. I suggest contacting the seller, as they might be able to exchange it; the shopping interface can sometimes be misleading on some online store. I made several mistakes myself too😅. I hope you'll be able to try Willy's firmware soon 🙌.
What is the link to the site at 2 minutes and 59 seconds?
Thank you for pointing that out! I overlooked adding the GitHub link in the description. Here's the link for you. github.com/h-RAT/Willy_Firmware_CC1101_ESP32_Display_Touchscreen
@@samxplogs merci
@@samxplogs Unless I am mistaken, there are no wiring help files for the assembly?
Je viens d'acheter la version pro de T-Display-S3 avec la coque
Mais malhereusement le firmware Willy est payant désormais 😢 impossible de le tester sur le Lilygo T-display-S3 Pro
Je ne connaissais pas cette variante. C’est très intéressant, le produit est mieux fini. Le mieux serait de contacter h-rat pour voir ce qui est faisable avec lui. C’est vrai que cela peut s’apparenter à une limitation d’être compatible avec seulement un module. Je suis preneur de la suite des informations 🙏
Hey, si j'ai l'occasion d'essayer les S3 Pro alors je serais ravi d'implémenter le firmware dessus. Cependant, l'avantage des S3 "normal" est l'utilisation des shield, ce qui permet de pouvoir y souder plus ou moins n'importe quelle module, sur les S3 Pro impossible.
Donc oui le produit est mieux fini, dans l'état, mais je serais curieux de voir comment y placer proprement un module CC1101 par exemple. (Il faut que cela reste assez "facile" pour tout le monde)
Pour les utilisateurs actuels, n'hésitez pas à m'envoyer un message pour obtenir les plans 3D disponible pour la board S3 "normal".
✌
Hi thank you for the tutorial, why do I need 2 shields? 😮
I'm happy to see that the tutorial has been helpful to you. Based on my understanding, you'll require two distinct shields to separate the IR and sub-GHz components. Otherwise, the PCB will become overly crowded with both IR parts and the cc1101. Currently, I'm still in the prototyping phase, awaiting the printing of a case and the acquisition of a micro SD card.
Интересно, а можно всё-таки уместить все компоненты на одном шильде?
Tu peux faire la version française stp
Excellente idée, merci. Je vais préparer une vidéo avec tous les projets similaires en français 🇫🇷
@@samxplogs dis-moi petite question, je viens d’acheter le soft j’ai contacté le vendeur quelle est la démarche exact stp merci
@@samxplogs tu a un Discord ou te joindre
How do o buy the firmware in the U.s
Hi Victor. You could buy it here
willyfirmware.mysellix.io
@@samxplogscan I buy it because I’m from Sarawak Borneo
£ that is euro 💶
the Link is down ?
Thanks for bringing this to my attention. I'm encountering a 404 error too, and I've already notified h-rat regarding the issue.
Thank you for your answer, I'll be happy if the link is online again.
Hey sorry for the late update, it’s back up :)
Can you provide willy firmware free
why all french ppl speak english like there were actor playing Officer Crabtree from 'allo, allo' episiodes?
Haha, not every French person speaks like Officer Crabtree, but I’m flattered to hear my accent gives you a good laugh! I wasn’t familiar with the show, but it’s great to know I can bring some hearty laughter just by chatting. 😄
tu envoi en belgique Willy Device + Firmware
Il n'y a plus de kit complet disponible, mais tu peux commander le matériel sur Amazon ou AliExpress, et obtenir le firmware directement auprès du développeur ici willyfirmware.mysellix.io/product/64ca6015d3acc