PCB Protection: Potting or Conformal Coating? | PCB Knowledge
Vložit
- čas přidán 7. 07. 2024
- PCB potting is a process where a printed circuit board or electronic component is immersed or coated with a protective material, usually a liquid or gel-like substance called potting compound.
Together with coating, they are both methods to protect circuit boards. Do you know the difference between the them? Find more information in the video.
Chapters:
00:00 Intro
00:53 Advantages of PCB Potting
01:22 Applications of PCB Potting
01:52 How does potting compare to conformal coating?
02:11 Protection strength
02:52 Flexibility and Rework
Website:
www.pcbway.com
www.pcbway.es
www.pcbway.ru
www.pcbway.fr
www.pcbway.jp
Subscribe and follow us to keep updated with the latest news and promotion:
Facebook: / pcbway
Twitter: / pcbwayofficial
Instagram: / pcbway
VK: pcbway
TikTok: / pcbway - Věda a technologie
Amazing thumbnail 👌🏻❣️
Thanks for the support
Thx for sharing! Very interesting!
Is there a solder flux that doesn't cause cure inhibitions with platinum cure silicon potting compounds? Some factory solder joints with flux residues don't have the issue but I don't have any information on what solder flux they are using. Any knowledge about the issue would be much appreciated!
Hi, what's the max value of ionic contamination before conformal coating ?
You can ask your dedicated sales representatives about this question on our website.
I'm wondering why some battlebots don't use the potting method to protect the more sensitive boards from being slammed around
Because of cost? It's more common in mass fabricated electronics where one or few mold (or in this case 'pots') can be reused over and over again. Plus it's only practical if you have no plan on reworking on the circuits later because once it's potted it's impossible to be removed without damaging the circuit.
3d printing negates the cost. However thermal transfer goes down vs direct air contact.
You could use silicone to be peelable, but as above thermal transfer conductivity would be lowered. ESCs for driving brushless DC motors get hot. Wireless does as well.
All methods make repairability drop.
@@boxcarhobo8315 hmm, couldn't thermals be solved by using a heat-sink and heat transfer lines similar to how gaming laptops move heat? or would the heat dissipation not be enough? (the thought of having them potted is specifically for boards that aren't going to be modified and would continue as-is after they were finalized.)
@@AchievementDenied Thats a good question. Another thought would be to pot it, but to the point where you could still have access to the top surface for cooling.
Sadly, I changed jobs and don't have the workshop I used to, and my electronics work is now for the hobby level.
@boxcarhobo8315 you got it backwards. Silicone is much better thermal conductor than air.
It's just a pain to debug or repair anything once it's coated.
This looks like fluid mechanics in 3D design.
Only boards exposed to water and other contaminations need this. Potting makes pcbs impossible to repair.
Yes. In common applications, conformal coating is more often used.