How to swap a classic car roof properly like we did on this 1955 Chevy wagon project.
Vložit
- čas přidán 25. 08. 2024
- Sometimes hot rodders have been known to “drive the long way around the barn” to get to their final goal. It sure seems like that’s the case for our Modern Rodding Project 1955 Chevy Wagon. We’ve been tinkering with small projects so far, like removing and replacing the spare tire well as well as the tailgate, with special thanks to Danchuk for helping us out on those projects. But the latest effort is a doozy. We want to keep the patina look but upgrade and make the remainder of our 1955 Chevy wagon.
The first step was to go through the self-analysis of the sheetmetal. Well, it’s loaded with what you would expect from years of hard-earned patina-thoroughly abused paint (or lack thereof) and rust. Really good rust; you know, the kind that you can see through! That was our first clue that something had to be done to our 1955 Chevy wagon roof-patina is good, holes aren’t. Upon close inspection and the fact that we could see through the holes in the roof in the rain gutter area had us scratching our heads.
it had a rust problem on his Chevy wagon. His writings were once translated to say: “The true creator is necessity, who is the mother of our invention.” And that’s exactly where we found ourselves. We needed to think and come up with a solution.
The primary tool required for this effort will be a good weld.
Our solution was to find another 1955 Chevy wagon and cut the patina roof off of it and install it on our wagon. As I was writing this out it sure sounds like a marginal idea at best. But alas, that’s what we did. We found another patina-ridden wagon and removed the roof from it and took our Swiss cheese-looking roof off and replaced it with another one that looked just as “bad” minus the “rust windows.”
We figured if we came up with this idea there must be other rodders with equally as questionable intellect and we should share the step-by-step approach. Working in our In The Garage Media Tech Center we began the process. Since a project like this really requires a metal man with expertise and a great deal of confidence, we knew exactly who to go to. For this we turned to Kev Elliott of Kev’s Rod & Custom located nearby. Elliott is truly a metal man supreme, but he’s also a “magazine guy” so he understood our dilemma of needing the work done but also in such a way that we could share what was done for the rest of us to see.
Increasing
An important step was to brace the sheetmetal (doors, windshield, tailgate, and so on) areas other than the roof so nothing moves. We want the sheetmetal to stay in position so when the roof is removed it will stay in position so that the new top will drop into position. There will be some adjustment, but the new top should go on without much drama. There will be bracing in the windshield, side windows, across the back, and several X-braces throughout the interior. Once this bracing is in position, we can cut the wagon roof off. Remember, there will be no bracing attaching to the roof.
First look with the glass out so that we can see the channels around the glass looking for severe rust. So far pretty good.
Something to keep in mind, you might want to keep some POR-15 on hand as you will want to paint exposed areas within the pillars that show rust. (All the pillars will be showing rust.) Make sure not to get POR-15 on any areas to be welded;
OK, now the problems start to make themselves known. Patina is one thing but the ability to see through the roof means there is a much bigger problem. The integrity of the station wagon roof is completely gone and to continue to use the car in this fashion isn’t doable.
Matching Cuts To Body Lines & Making Templates
Next you are going to match the posts that remain on the car and what’s been removed from the new top. The curved area near each of the window pillars is particularly important. Elliott made cardboard templates from the curves on the car to now copy over to the new roof. It’s especially important at all the door/pillar areas.
Now that we’ve made the decision to remove the wagon roof, where do we start? We rounded up several pieces of scrap square or rectangular tubing. We began to measure, cut, and develop a skeleton framework that would rest inside the body before the roof is removed.
With the bracing in place, the appropriate cuts made it so the top can be peeled off. Once the cuts are matched to the new top and the original sheetmetal the top can be lowered into position. In our case we used our SnapTrac crane to easily move the top around and get it into position. If you don’t have some form of crane to lift the new top it will take at least four (six would be better) guys to lift, position, and lower into place.
Patience Is Key It will take some repositioning and trimming to make all the corners fit but patience will win out. The result is the removal of a very weak roof and a new sturdy one installed. Also, we have managed to keep the patina appearance, which was one of our primary goals.
Well done, I have never seen this done to a station wagon before. Actually to replace a roof with a replacement one is a lot harder than just chopping a top. Good job. 😮
Great job
great work.
Keep on keeping on Kev !
Nice job! I know how much work that is. I just chopped up my 55 2 Dr 2 210 wagon roof, which had minor rust.
I grafed a Nomad roof to my A piller at the dash area and I'm hanging Nomad quarters that were rotted to the roof by what's left of the B and C pillers. I'm rebuilding the lower rear quarter window channels that nobody makes along with other parts that I have to hand make.
It's coming along slowly, but it's coming along nicely. I'm using templates I'm making from my other Nomad that I have had since 1974.
You did a really nice job fitting it.
I’d love to see the entirety of this build. Currently building one myself
Bring back Rod &Custom !!!! R.I.P. Pat Ganahl !!!!
Where's your gloves nuts
A 1955 car is NOT a VINTAGE car!
Educate yourselves Yanks!
you are correct so I changed it to Classic
Bob Marshall, why don’t you enlighten us as to the difference between a vintage car and a classic car. If that is the only comment you have pertaining to this video, you have missed the point all together. 😮