Wes, I have watched you from the beginning and I have to say that it has been wonderful seeing you grow in so many ways, your content is always to the point and I love the humor that you put in everything, especially the wording you use too. Seeing your mechanical inventory grow and improve over the years has been something special to see and I love the fact that you share your wonderful life with everyone. Thank you for being such a honest and thoughtful man.
The only problem I have Wes is when I watch most of your videos I get so interested in what your talking about I forget to give it a thumbs up and have to start it again to give it one and stop it again. Oh, Happy Thanksgiving.
"Pray, pray, pray that everything works out the way I'd like it to." You and me both! All the best Wes, it was a rough year for the both of us. However on the bright side, there have been blessings. You have William, and I have my life to continue along with my sister in remission. Looking back, it wasn't a bad year after all.
7530 will be handy tractor for that baler with the ivt she'll love it ! good to see you still growing wes cant wait to see your two krones in the field !!
Hi Wes, Great looking machine hope everything works out on the straw deal. Just wanted to wish all of your family a Happy Thanksgiving, and a side note I wish I had half the knowledge you have about business and tractors and how they work.
I hope everything works out and you bale a heap of straw. Most farmers around me are way behind getting beans harvested and wheat in. Several who have planted early are having to replant due to it rotting. I believe crop insurance began backing off after Nov. 20. I hope ground conditions improve but it's mighty wet . Hoping you the best .!!!
Evening Wes. Had a look at one of these at a show today. Was with George, Liz and Podge. We were talking about the hassle you have had this season. They said ya may come over next year, if so, I might be lucky enough to meet ya with them.
Check the price on a set of loader brackets for the 7530 so you can move the loader back and forth between the 7530 and the 8120. The 7530 would make an awesome loader tractor with left hand shuttle and IVT transmission. Congratulations with the new baler !
Enjoy your new toy Wes, glad you coming down south to work too,have great day,hope your back is better to an tell Mr. Tim i say hello an i know your proud dad too of him.
We have had a set of alliance tires on our tractor. They have been on for about 12 years. We don’t do really and road travel,2 miles at the most. So hopefully they will work for you.
ISIS RA EL ? Wes seemed apprahensive to criticize, aka say the truth. Too bad simple things like tires are too complex or too expensive to be made in America...
Hi Wes! google John Deere Dromone k80 heavy duty ball hitch it will be much better than that loose clevis aslong as you don’t mind the baler being a few inches closer to tractor, Hope this helps! Andy 👍
K80 Ball hitch r the best if you run them once u never want to go with those hitch pins got an ball hitch on my 7310R gets rid of all the banging hahaha :P
Yep the K80 Ball will just straight swap out for the drawbar. Also might be a plan to take off the link arms or tie them up if you plan to have this baling full time. czcams.com/video/H3l6vPWQMfI/video.html&ab_channel=DromoneEngineeringLimited
tis puuurrrdddyyyyy! can't wait to see it baling.Some time in 2026 or so it might stop raining there :)And hope you have a happy Thanksgiving tomorrow! Wife and I heading out to New Orleans for some great food,Jazz,and a relaxing get away. Supposed to rain some there too (of course) but will be warmish and we have umbrella's so no big deal. Just spent a basket full of money restoring a 99 F-250 and putting on a camper shell/topper to make it into a weekend camper and asked the wife if she wanted to go to the coast and camp for the holiday:luke warm reception to that idea.Asked her if she wanted to go to New Orleans: then she got excited.So the p/u I worked on for over a year will take us to the $250.00 a night suite in New Orleans.....Can't take my Ram 3500: won't fit in most parking areas.
I'm down in NC. A few years back a crowd came through baling straw. Trucks said Pacific AG but I believe they had Kansas tags. They had 8R series deere's with front suspension, fat tires, and short axles. I could tell they weren't local because you don't see tractors spec'd like that here. They had mainly Massey Balers. All Equipment was new. They baled all the straw around and stacked it in the sides of fields. They said they were baling for a contact for erosion control on a new pipeline but some people also said it was for biofuel. Bales stayed there for a couple years, and I was told they ended up hauling bales up north for the composters. They only came through one year and heard it was a flop. I hope the best for you and hope you don't get jepped, Custom baling can be risky.
Awesome sauce. One little thing I didn’t like about the new setup was that the hitch looks a bit dainty for the new bailer. Just an observation, better safe than sorry. Can’t wait to see this one eat hay.
at 5:22 that limiter block is what a lot of folks doing straw with the Krone balers, adjust so that it carries the weight of the pickup at a fixed height, the gauge wheels are not normally in contact with the field. Since the straw stubble is usually higher than hay, the straw windrow is sitting up higher from the ground. Wes, Is this MY17 Krone 1290 HPD HS baler, equipped with brakes? If so, air or hydraulic? I wish they would stay this clean, after you start using them. When you go on your straw baling project, don't forget the oil for the compressor and self-contained hydraulics, you'll need to change them after breakin. And PLENTY of grease for the Beka-Lube centralized lubrication system. Sounds like somebody turned up that 7530 diesel engine. The English dynotest of 208hp, is a lot more than the 176hp that the Nebraska testing got.
Beautiful baler! For feeding cattle round bales are easier to feed. Since we don’t sell hay a high dollar baler isn’t in the cards but I do love the Krones.
I hope when you get rolling in the straw you can get it done and everybody come home sitting on some good paper... And to think of the double time on making your hay... I think the stack wagon guy is going to be constantly stacking... Hope you keep going in expanding your operation because Joe acts like he is already jumped in with both feet to help you... Awesome to see the younger generation your sons learn from their father how to make a serious farm go...
I bought a used square baler from a dealer that had no clue what they where doing with balers because they greased the crap out of the knoters and they washed it and it had bales in the chamber. I was not impressed with what they did but it has been a great baler after I did some things to it.
"If you scared say you are scared" Wes AIN"T scared. Hope your plans work out. As far as the draw bar goes I have seen people fit a brace (link) from the tree point attach point on the tractor to the draw bar via an ajustable link. We run Amadas 6 row peanut pickers around here and they are very draw bar heavy. Seen some neighbors do that on the older tractors. Plenty of hp just a little lacking in the drawbar strength. Or you could go with another stronger draw bar. Can't wait to see it run.
where ever that baler goes, i hope you have all the right tools, manuals, extra parts and accesss to a messicks service center & trained personnel to be at the ready incase of faiilure or in need of repair or service... good luck down south!!!
Nice bit of kit, Always a good idea to run something new near to the workshop it would be a bitch to go halfway across the country to find something is a miss within it.
That is just a beautiful bit of engineering. You have had only minor problems with the other Krone so this one should be awesome too. You think after spending so much on it that krone might have thrown that maintenance/spares kit in for free or at least as part of the deal. They obviously spend a lot of money on Research and Development. Having great service back up is something that has sold it too.
The 7530 is not made for this kind of work, believe me, we tried it on the grain cart and a straw mill. And since you haven't air-brakes on the baler its way to lightweight for it. it will push you around the corners like hell and maybe lift the tractors ass end and kill the pto shaft.In the summer you will discover that the cooling package cant keep up and so the radiator fan goes nuts and sucks all the dirt and straw in, and so you're going nuts because its plugged constantly. These are my experiences.
@Fendt BlackBeauty Believe it or not, the things i wrote above are exactly my experiences with our 7530. Its by far the worst for working in dirty conditions. Blown head gaskets are also pretty common on them .Ours had it twice, the last time it cost over 10k because our dealer did it right and changed everything, cooling fluid in engine oil can be pretty abrasive. The 6210r does many things better. I would rather pimp up a 7810 to 200hp and bale with that, because it can take it.
The gusset design and welding procedure is done to ward off fatigue cracking associated with stress flow lines on steel structures that are exposed to reversals of stress. Fatigue cracking on steel frames can take years to develop. Stitch welding is another method to accommodate stress and avoid cracking.
Hi Wes can you get the ecu out of an 8320 in a breakers yard and put it in your 8120 it would be cheap way to get more power for that baler if it was possible.
Since you have this new contract, I'm wondering if you were still going put the loader on the 8120 or would you change your mind and put it on the 7530 since it's a better tractor for loader and already have the left hand reverser that would definitely makes thing easier.
@@cmusic52The only advantage really is it's weight to help stop those trailers. I'm surprise that OSHA and other institutions are all about safety but then they don't care about trailers without brakes, both Ag and road ones. Anyway it's way too long to have a loader and Wes already mentioned this, plus the 7530 has better maneuverability. Even though Wes was getting a bit tired about people saying the 7530 would be the perfect tractor for a loader, in the end, it's the true.
Wes, I have watched you from the beginning and I have to say that it has been wonderful seeing you grow in so many ways, your content is always to the point and I love the humor that you put in everything, especially the wording you use too. Seeing your mechanical inventory grow and improve over the years has been something special to see and I love the fact that you share your wonderful life with everyone. Thank you for being such a honest and thoughtful man.
Congratulations on the expansion of your business! I am sure this will be great for you and your family!
Well done Wes looks great. Good luck in your New venture
This guy makes serious moves.Gotta love it!!!
lol my thoughts exactly.
I like how krone learns from there mistakes and improves and corrects issues on new balers
Wes
Awesome Krohn Bailer
I’m glad that everything is going your way and hard work always pays off!!!
Nice, it will be great to see the two running in tandem on the fields, awesome
The only problem I have Wes is when I watch most of your videos I get so interested in what your talking about I forget to give it a thumbs up and have to start it again to give it one and stop it again. Oh, Happy Thanksgiving.
"Pray, pray, pray that everything works out the way I'd like it to." You and me both! All the best Wes, it was a rough year for the both of us. However on the bright side, there have been blessings. You have William, and I have my life to continue along with my sister in remission. Looking back, it wasn't a bad year after all.
Congratulations! May you have a lot of bales!
7530 will be handy tractor for that baler with the ivt she'll love it ! good to see you still growing wes cant wait to see your two krones in the field !!
Hi Wes, Great looking machine hope everything works out on the straw deal. Just wanted to wish all of your family a Happy Thanksgiving, and a side note I wish I had half the knowledge you have about business and tractors and how they work.
Awesome Wes, good for you!👍
Great video Wes another sweet peace of equipment in your fleat
such a beauty of a machine , glad to see another new one
I hope everything works out and you bale a heap of straw. Most farmers around me are way behind getting beans harvested and wheat in. Several who have planted early are having to replant due to it rotting. I believe crop insurance began backing off after Nov. 20. I hope ground conditions improve but it's mighty wet . Hoping you the best .!!!
Congrats Wes! It's a nice baler.
Nice to see Krone is making those small improvements, it means they care about the quality of their products.
Love it when a plan starts to fall in place!
Hell of a machine right there!
Beautiful machine!
Evening Wes. Had a look at one of these at a show today. Was with George, Liz and Podge. We were talking about the hassle you have had this season. They said ya may come over next year, if so, I might be lucky enough to meet ya with them.
Check the price on a set of loader brackets for the 7530 so you can move the loader back and forth between the 7530 and the 8120. The 7530 would make an awesome loader tractor with left hand shuttle and IVT transmission.
Congratulations with the new baler !
quadarinxxx that loader is way too big and wide for the 7530
Good jobs and good balling with the new machine.
Loving new Krone baler, I hope it goes smoothly for you👍always good have spares with new equipment 👍
Congratulations that is a beast Happy Thanksgiving Wes to you and your family
Congratulations and happy Thanksgiving
Watching here is where we all learn how things get done. Farming really has changed since I was a kid on the farm in the 50's.
Bout time that 7530 earned its keep! Happy thanksgiving from the uk guys 👍
Nice Baler! Cant wait to see them side by side in the field!
Enjoy your new toy Wes, glad you coming down south to work too,have great day,hope your back is better to an tell Mr. Tim i say hello an i know your proud dad too of him.
I'm with you on the alliance tires, haven't had any luck with them on my equipment
We have had a set of alliance tires on our tractor. They have been on for about 12 years. We don’t do really and road travel,2 miles at the most. So hopefully they will work for you.
ISIS RA EL ?
Wes seemed apprahensive to criticize, aka say the truth.
Too bad simple things like tires are too complex or too expensive to be made in America...
Hi Wes! google John Deere Dromone k80 heavy duty ball hitch it will be much better than that loose clevis aslong as you don’t mind the baler being a few inches closer to tractor, Hope this helps! Andy 👍
K80 Ball hitch r the best if you run them once u never want to go with those hitch pins got an ball hitch on my 7310R gets rid of all the banging hahaha :P
@@reinoutwaanders could use a vbg or jost truck hitch, but the euro pick up style can handle enough. they run tri axle dump trailers with those.
Yep the K80 Ball will just straight swap out for the drawbar. Also might be a plan to take off the link arms or tie them up if you plan to have this baling full time. czcams.com/video/H3l6vPWQMfI/video.html&ab_channel=DromoneEngineeringLimited
tis puuurrrdddyyyyy! can't wait to see it baling.Some time in 2026 or so it might stop raining there :)And hope you have a happy Thanksgiving tomorrow! Wife and I heading out to New Orleans for some great food,Jazz,and a relaxing get away. Supposed to rain some there too (of course) but will be warmish and we have umbrella's so no big deal. Just spent a basket full of money restoring a 99 F-250 and putting on a camper shell/topper to make it into a weekend camper and asked the wife if she wanted to go to the coast and camp for the holiday:luke warm reception to that idea.Asked her if she wanted to go to New Orleans: then she got excited.So the p/u I worked on for over a year will take us to the $250.00 a night suite in New Orleans.....Can't take my Ram 3500: won't fit in most parking areas.
Hope you have as good of luck with the new one as you have with the old one!
Best of luck with it Wes
I am happy for you being blessed with a brand new Krone even though you gots to pay for it.
Congrats on the new baler bud. Here's hoping it works out well for you. This one seems to be beefed up much more than your other baler. Shows promise!
Happy Thanksgiving Wes!
I'm down in NC. A few years back a crowd came through baling straw. Trucks said Pacific AG but I believe they had Kansas tags. They had 8R series deere's with front suspension, fat tires, and short axles. I could tell they weren't local because you don't see tractors spec'd like that here. They had mainly Massey Balers. All Equipment was new. They baled all the straw around and stacked it in the sides of fields. They said they were baling for a contact for erosion control on a new pipeline but some people also said it was for biofuel. Bales stayed there for a couple years, and I was told they ended up hauling bales up north for the composters. They only came through one year and heard it was a flop. I hope the best for you and hope you don't get jepped, Custom baling can be risky.
Brandon Creech can you send me an email? Onelonlyfarmer@yahoo.com I need to speak with you a little about this.
Brandon Creech they’ve been protesting this pipeline in my area a while now!
Nice to see ur new baler has come home , krone nothing but the best
12:40... Trelleborge tire ad. Cool!
You could subtly set up other cameo ads in the videos.
Love the new Krone 1290 HDP .
Awesome awesome great rig Napa mike
Looks great awesone purchase!
Great looking BAILER😎👍👍👍👍👍
Congrats on your new iron Tim.
New Toy alert.. just before Christmas too. Might end up using it for 2018 hay yet
Looking forward to a video of your two krones bailing side by side keep up the good work
Another awesome baler for you can't wait to see it earning its keep soon
Awesome sauce. One little thing I didn’t like about the new setup was that the hitch looks a bit dainty for the new bailer. Just an observation, better safe than sorry. Can’t wait to see this one eat hay.
at 5:22 that limiter block is what a lot of folks doing straw with the Krone balers, adjust so that it carries the weight of the pickup at a fixed height, the gauge wheels are not normally in contact with the field. Since the straw stubble is usually higher than hay, the straw windrow is sitting up higher from the ground.
Wes, Is this MY17 Krone 1290 HPD HS baler, equipped with brakes? If so, air or hydraulic?
I wish they would stay this clean, after you start using them. When you go on your straw baling project, don't forget the oil for the compressor and self-contained hydraulics, you'll need to change them after breakin. And PLENTY of grease for the Beka-Lube centralized lubrication system.
Sounds like somebody turned up that 7530 diesel engine. The English dynotest of 208hp, is a lot more than the 176hp that the Nebraska testing got.
Beautiful baler! For feeding cattle round bales are easier to feed. Since we don’t sell hay a high dollar baler isn’t in the cards but I do love the Krones.
The Krone's monitor looks like an etch-a-Sketch.
I thought exactly the same thing
I hope when you get rolling in the straw you can get it done and everybody come home sitting on some good paper... And to think of the double time on making your hay... I think the stack wagon guy is going to be constantly stacking... Hope you keep going in expanding your operation because Joe acts like he is already jumped in with both feet to help you... Awesome to see the younger generation your sons learn from their father how to make a serious farm go...
Nice video of the baler Wes - hope it all works well for you!!
Damn thing looks like a Transformer.
Hope it works great for you mate!
Wes and the Pandy family. Happy Thanksgiving! 🦃
happy thanksgiving to you and your family.
I bought a used square baler from a dealer that had no clue what they where doing with balers because they greased the crap out of the knoters and they washed it and it had bales in the chamber. I was not impressed with what they did but it has been a great baler after I did some things to it.
Woohoo Xmas came early!
"If you scared say you are scared" Wes AIN"T scared. Hope your plans work out. As far as the draw bar goes I have seen people fit a brace (link) from the tree point attach point on the tractor to the draw bar via an ajustable link. We run Amadas 6 row peanut pickers around here and they are very draw bar heavy. Seen some neighbors do that on the older tractors. Plenty of hp just a little lacking in the drawbar strength. Or you could go with another stronger draw bar. Can't wait to see it run.
where ever that baler goes, i hope you have all the right tools, manuals, extra parts and accesss to a messicks service center & trained personnel to be at the ready incase of faiilure or in need of repair or service... good luck down south!!!
Great looking baler!
Your very brave running that baler with that tractor, be interesting to see the weight push it around on hills.
Nice bit of kit, Always a good idea to run something new near to the workshop it would be a bitch to go halfway across the country to find something is a miss within it.
That is just a beautiful bit of engineering. You have had only minor problems with the other Krone so this one should be awesome too. You think after spending so much on it that krone might have thrown that maintenance/spares kit in for free or at least as part of the deal. They obviously spend a lot of money on Research and Development. Having great service back up is something that has sold it too.
hoping the best for you on your adventure
Did you add grease fittings to the packer bearings?? She looks good.
Good video
I'm pray, pray, prayin for you Wes.
Fair play you don't fuck around, hope all goes well
The 7530 is not made for this kind of work, believe me, we tried it on the grain cart and a straw mill. And since you haven't air-brakes on the baler its way to lightweight for it. it will push you around the corners like hell and maybe lift the tractors ass end and kill the pto shaft.In the summer you will discover that the cooling package cant keep up and so the radiator fan goes nuts and sucks all the dirt and straw in, and so you're going nuts because its plugged constantly. These are my experiences.
@Fendt BlackBeauty Believe it or not, the things i wrote above are exactly my experiences with our 7530. Its by far the worst for working in dirty conditions. Blown head gaskets are also pretty common on them .Ours had it twice, the last time it cost over 10k because our dealer did it right and changed everything, cooling fluid in engine oil can be pretty abrasive. The 6210r does many things better. I would rather pimp up a 7810 to 200hp and bale with that, because it can take it.
I know there is a special doucebag that is just JEALOUS as hell!!! Good deal Wes I hope too help down here in any way I can with the straw!!!👍👍👍
great baler wes good luck with it
The gusset design and welding procedure is done to ward off fatigue cracking associated with stress flow lines on steel structures that are exposed to reversals of stress. Fatigue cracking on steel frames can take years to develop. Stitch welding is another method to accommodate stress and avoid cracking.
Was there ever an issue with the size of the krone wheels. I remember that being a big concern when you changed from the new holland
Are you gonna build some kind of weight bracket to hang weights on the front of the 7530?
We have a naighbor with a baler sitting outside full with hay in the bale chamber with 6 ft weeds growing out it and it's like a 2013 baler
How are you going to move all your equipment south? Buy a lowboy, or have it all hauled?
Well wear Wes, hope its lucky for You:)
Did Messick's furnish an old rotted bale lodged in the bale chamber?
Congrats
awesome!
I’m very excited to see the olf team bailing straw in 2019
Kittens and pups that must be a neat trick lol
i wondered if youd switch those wheels out
Nice. Hope it works out well.
That is pretty awsum
That is a seriously nice, well made machine.Beefy,not chincy.
Merry christmas from Krone 😂
Hi Wes can you get the ecu out of an 8320 in a breakers yard and put it in your 8120 it would be cheap way to get more power for that baler if it was possible.
Nice!
Well hello Carolina Krone.
Mornin Wes
What region of NC are you gonna be bailing Straw Wes
Now you and tim can race to the end of the feild and have a few laughs
Since you have this new contract, I'm wondering if you were still going put the loader on the 8120 or would you change your mind and put it on the 7530 since it's a better tractor for loader and already have the left hand reverser that would definitely makes thing easier.
I dunno, the 8120 would be a good tractor for hauling a lot of bales around with the loader and a large trailer w/o brakes behind it
@@cmusic52The only advantage really is it's weight to help stop those trailers. I'm surprise that OSHA and other institutions are all about safety but then they don't care about trailers without brakes, both Ag and road ones. Anyway it's way too long to have a loader and Wes already mentioned this, plus the 7530 has better maneuverability. Even though Wes was getting a bit tired about people saying the 7530 would be the perfect tractor for a loader, in the end, it's the true.
According to Tractor data, the 4960 has a claimed horsepower of 200, with a tested hp of 210.
the 4960 will easily run either krone but the newer tractors are much nicer to be in all day (as much as I hate to admit that)
Alan Waggoner 4960 would be too slow between fields for the road