How I built a Barrel Table that Dispenses Beers!
Vložit
- čas přidán 16. 06. 2024
- Today I built a table out a whiskey barrel. And this table can dispense 5 beers through a secret compartment! Enjoy.
Bottom Of the Barrel Podcast:
/ @bottomofthebarrel
LEARN MAGIC TRICKS: learnmagicwithwes.com
Instagram: bit.ly/StuntMagician
WES THEME SONG: open.spotify.com/album/7qpQ0k... (By Eric Vanier)
Wes Barker is a Canadian magician and comedian doing funny tricks, and telling great stories. You may (or may not) know Wes from his TV show Big Trick Energy. Well that's TV... this is CZcams! So watch here for hilarious, ridiculous, and unfiltered ideas with magic, stunts, and pranks. I am the funniest magician that is also a stand-up comic, or maybe I'm the comic who is best at magic. Either way you get the idea. I tour all over doing colleges, comedy clubs, and corporate events. Catch the adventures and tricks right here. With this magician / comedian based out of Vancouver and Toronto, Canada. I make funny stuff. That’s my only rule. Everything has to be funny, from street magic to stage illusions, as long as there is a joke to be made. I do magic tricks, sketches, stand-up comedy, card tricks, mind reading, and tricks with naked people. I’ve been on America’s Got Talent, Penn & Teller: Fool Us, MTV Greatest Party Stories Ever, and Wizard Wars. You can find me pulling pranks on friends, gags on strangers, or just general sleight of hand, magic, illusions, and the occasional bar bet. Wes Barker also hosts a podcast with Chris Ramsay called Bottom Of The Barrel. Go check it out! - Zábava
BOB Thanks you sir.
Tell him 😂
The 't' is silent...😂
🤯 Chris being mind blown by your "magic" beer 🍺 table is fucking priceless, Wes. 👍👏
The creative process is always more staring and thinking into space than actual work.
Disappointed you didn’t mention the table is literally the bottom of a barrel 😂
So it wasn’t a magical beer dispensing elf? Thanks for crushing my dreams Wes.
lol 😂
Eric has other things to do than be under a table all day
Amazing.
I do have a suggestion.
Not a suggestion for the table, but for the video you should have had Chris’ reaction as the closer/outro. After watching the build I wanted to see it again as the finale and had to rewind it to find that spot.
Engineering Wes! Making me think... I would love to expand on this idea, but have no tools and cannot drink beer.
However... immediate idea is that you have a spinning table with a simple gear underneath it that causes the rotation, much like the axel of a car and its wheels. An arm at the side with the hole in the pipe that pushes the beer into the slot with some thin, hard guides. Each time you push the dispenser pipe down, the gear rotates another beer into position and pulling up will push the beer into position with the lever (obvious height differential to compensate for the gap & delay) and then it comes out to you. You have a gap between the wheel of beer and the centre pole to place your icepacks and load it. Should fit, what, a full twelve pack? Legs are then extending from below the cage that holds the two gears and lever system. I do not have Instagram or anything... but I can find a way to draw you a simple picture if that would help.
Here is the gear I mean: www.google.com/url?sa=i&url=https%3A%2F%2Fwww.thomasnet.com%2Farticles%2Fmachinery-tools-supplies%2Funderstanding-gears%2F&psig=AOvVaw1U-AvmstBo65kYPFkTMnfM&ust=1624732434625000&source=images&cd=vfe&ved=0CAoQjRxqFwoTCNDxy5O2s_ECFQAAAAAdAAAAABAD
You have the spiral bit on your beer pole, an intermediary (or multiple as needed to control the rotational amount) between it and the outer one, which has the teeth pointed inward.
+1 for creativity, sketchyness +9000!! Should name the channel : W-ood, E-lastic and S-raps
Yea, see... this is why I love your style, when I first saw you... I did not know you were friends with Chris, but there was a Chad on the beach doing magic, well... I have seen that, but X-ray illusion, how fun is that? Messing around, acting afool! Wes, you are a one of a kind man! Love you!
I wonder if you can't utilize a lazy susan and then your shaft wouldn't have to spin if you got a way to spin that instead. Your solution is probably the best bang-for-buck without overdoing and overthinking everything but it's fun to think of new ideas for this!
His reaction was priceless
I was rooting for you on that barrel turning out well for BOB. Great job-- your attitude is always amazing. I can't even fix a stopped toilet!!!!! Cheers.
Always makes me happy to see Tuborg over seas. Great idea. Cheers from Denmark
Looks awesome, Wes!
Would be cool to make one out of entire barrel, make a door at the side, fit in an entire fridge, make sure the heat does not get trapped and air can circulate, drill a hole at the top of the fridge...
You could also add some hidden marking at the top so you can easily distinguish correct positions and load different drinks as requested:p
This is actually way more ingenious that I thought it would! Definitely on my list of random activities I want to accomplish haha
Awesome, Wes! Thanks man! It's been killing me to know how ya did it!
I know a million people think this, but I wish we could be friends man. You're so smart and funny dude I wish I had friends like you. I love your videos and love BOB! KEEP IT UP!
Most creative man on CZcams right there! Soo many Ideas!
Dude, this project is cool. My like is well deserved
Nice work Wesley. If you had a circular slide going around the inside (like a mini plastic slide like on a playground) I bet you could fit more cans & you also wouldn't need to turn the dispenser to reload. A hidden access door could be cut between the boards as well. A thin Dremel type tool would be good to minimize the cerf making the edges of the door nearly invisible...
As a dane, my favourite part was watching you use a Tuborg. Didn't know it was that known outside of Denmark.
Legend!! 🤙✌️
revolving door powered by the up down action of retrieving a beer will fix your problem 4:41 "Friendly Advice" lol
Awesome man! Such a fun build. Thank you for sharing it with us!
I wish I knew about that years ago!!!
Great job, Wes!!!❤️💪🏼🙏🏻👍🏻
Pure genius!
This was super cool!
Yay, thanks I wanted to see this since you blew Chris' mind with it :D
Ok. I thought the burger catapult was a bit of waste of time, though entertaining.
This is pure genius!
Yes! Was so curious about how it works. Now I know! You're so creative!
While I won't be building one, I had an initial thought. A soda can storage rack/dispenser seems like an obvious go to. Not only would it hold more than your 4/5 beers, it would act as a cage so the positioning could probably be a little more flexible. Also, the top of the dispenser rack could be made to be right behind a fake bung hole. That way, you don't even have to get inside. Just pop off the bung, load up the beers, put the bung back on. Only thing from here is really a cooling system.
I see something like an escapement mechanism being used to control too many beers trying to get loaded into the chute at once.
Fantastic!
So clever! 🙌😂💕
I was thinking linear actuator, then rotate a revolving chamber above the cup which holds the beers. Activate the actuator and it'll move up, push the beer, and pop it out the top. Make the revolving "clip" able to be slid in and out easily for quick reloading, add some insulation or cooling and you'll be on to a winner.
That's a pretty simple way to do it and I'd absolutely be impressed if you conjured me up a beer from the table I was sat at 😄
Great Work!
This man is a beast!
Amazing !!! 🍻🍻 👏👍
This is cool now I want one
U can’t really appreciate it unless your an OG BoB fan👌🏻
I think the season 2 beer barrel needs to have a kegerator inside!!! With some of that Wes 2nd beer in it!!! Oh yeah!
Blanche de Chambly! A classic! Fun fact, I'm actually a brewer for Unibroue now, and that's a pretty good ad right there ahah
Haha that’s fucking awesome!
This is just great! :D I don't drink beer, but this video inspired me to became a drinker
This is cool. You’ve definitely got my gears turning! There has got to be a way to keep the cans cooled while down there, with insulation or dry ice or something along those lines.
Cool build.
Clever man 😆
That is very cool. I could see slots on the sides to load it and maybe an ice area to keep them cool. Hmmmmm very cool.
That is crazy
soooo good ❣️❣️❣️❣️
Now I am thinking you should go for a KiwiCo sponsorship, if you are going to keep making builder episodes. Cool looking build, sir.
Nice jorrrb!!
I’ve got to make me one of this ASAP 🍻🍻
This is so cool! I bet Eric L. can build it better...
Just in case you want to do improvements, my idea would be to use a rubber band or a spring with guiding canals to dispense the beers.
Still, pretty cool, I liked it, simple and fun.
I was expecting like springs that push the beer against the unopened pipe and only releasing when you twist the pipe handle. Still awesome!
Magic 👏
You should sell these on the second merch website. Take that Ramsey
love it
Oh chris, don't tell wes you already got free beer from a dispenser and a couple of kids you haven't quite met
Wasn’t sure this was the right video thanks for the clarification haha
Geez so that's how 🤯🍺
Great 👍
You are the second Einstein:)
everyone will be confused. everyone will want a beer. yes. haha
now just need an engineer to have a loading system that doesnt involve climbing under the table. :P
and to work on refrigeration ;)
But this is big brain. and rich ppl would benefit from an advanced version of this. GG!
Are you going to turn it into more of a cooler later? Like adding some kind of insulation.
I think it's quite cool, I'd add some marks/reference positions for each beer and maybe something like a tap to work as a handle.
The mad genius, in his lair, creating the next device to help him towards world domination!
Is there an outtake of you on the phone saying: "Yeah Chris? About that floor...." :)
Your a genius 📝genius
k wtf you need more subs , you are highly under rated man. also I WANT BOB MERCH ..beer bottle openers , beer mugs , flasks? ...definitely a nice frosted beer glass with BOB on it maybe even with your ugly mugs on a mug????? make it happen !!!
I'm going to build this soon.
Oh I would love to build weird shit with you! 🤣🤣🤣
🍻Here's for Season 2!
I feel like there should be a way to load the beers from the top, like making it so the whole top part comes off to load more beers, then pop back in place and then use the middle tube to get the beers out and that should solve the loading from the bottom part i guess... but this is awesome already tho!
I'm not even old enough to drink but I'll take your entire stock
I have never pressed this video so fast
You could have used some springs to push a beer into the empty chamber. and then use a rail system to push the beers around in a circle. then you dont have to rotate the cylinder. and make the spring that pushes the beer into place, compress when the beer cylinder is pulled up. that way a fresh beer is loaded into the next up spot.
Nice
Challenge excepted !!
Wes, your brain deserves a spot in The Smithsonian, only slightly in a less prominent place than Chris Ramsay's...ALL LOVE! 👍👆👏💪😜😶😋😮🐰🎩🏁🃏🙌🙊😀❤
I guess it's called the bunghole? Doesn't matter. Lmoa!
Let’s call it the 5 warm beer barrel!!
Ok you need to keep the gate in one place, (no twisting necessary) some sort of spring, band or bungee cord to “load” them. Bags of ice would leak all over so you need some sort of bucket or use those plastic ice things ppl use in coolers.
His method utilises ice packs, so you are going to have to think of something just as practical or more elegant.
Yeah, my ice packs sweat a bit but not too much water at all. They keep remarkable cold in there. So far I've had it go as long as 2 hours with it staying perfectly chilled.
craaaazy dude! but you're not even rotating the tube in your podcast, are you?
I would be proud also. Well done. I'd seriously like an update video if you ever improve it.
I guess the world is a better place now.
Could you cut a door at the side with a lock , boom , no under neath suply , side supply all the way
Plus 5 beers ? We call that warm up beers on a night out in Glasgow kapow
I have a table that does this too. I call it a Bar.
Make it function as well and as beautiful as a automatic mahjong table when the blocks appear . But just Knock on the barrel and a cold beer pops up automatically..
Wes: "if you drink five beers you're not gonna be able to oparte the beer table"
Polish me:
😂 HA! YOU'RE BIG BUT WEAK!!
Haha true 👍🏻
hopefully, I just doubled your views from 9k .. this is great!!!
6 dislikes from old timey prohibition agents.
Now if you can just put some kind of chiller inside that barrel to keep them cold at all times
5:35 I'm pretty sure the barrel came before the pult
Amazing man 🤯🤘
How many episode are there in
BigTrickEnergy in total
How do you keep the beer cool though?
totally need a way to keep the beers cold
You need to line it with insulation then canibalise a mini fridge to make a mini-fridge beer barrel out of it.
You guys should start having other people on the podcast.
If Chris is blown away …… that’s it
If you can up the supply, and keep it cold, you, Sir, will be a GOD AMONGST MEN! 😅👍❤👏🙌🍻🍕🍔🍟🍸🍝🍖(I'm hungry, food's on the stove...😅)