Here’s a LINK to the PRESSURIZED SPRAY CAN used in this video. Thank you for supporting the channel! 👍 👉 SPRAY CAN amzn.to/4eKhJpJ 👉 WD40 amzn.to/3XLbbBk
JB, it was a honor and pleasure to run into you the other day at the Depew post office. I recognized your voice as you spoke to the clerk and then recognized your face. I’m a subscriber to your channel and totally enjoy all the videos. They are to the point and informative and I have learned a lot from them. I have a Toro recycler mower I purchased 2 years ago. It has served me well so far but I wish changing oil would be an easier task.
Thanks for being a cool fan and following along. It was awesome meeting you too, Mike! Always cool running into a fan of the channel! Does your mower have a low dipstick like the older model?
I’ve still got my 19 year old Toro recycler. The Tecumseh engine on it is still going strong and the deck doesn’t have a lick of rust on it even though most of the paint under it is gone just from wear. I just brought it to my plot of land in Bear Lake and I recently posted a video of it cutting down the brush. We will be returning there in 2 weeks to finally do our trip I was talking about.
All I can say is that I still have my 06 Toro recycler personal pace mower, Tecunseh engine, rear wheel drive, and to this day starts on the 1st pull every time. Original deck very minor rust, original carburetor, wheels and cablesI. I did have to replace the RWD transmission last year. Every year the oil is changed, new filter and plug. Blade is sharpened /balanced about 5 or 6 times each growing season . Fuel is always treated with an ethanol fuel treatment. The underside is water port washed after each use and is run 5 minutes or more to dry the underside and stored out of the weather in a shed. You take care of your mower and it will give you years of loyal service.
I do love a good Quagmire insert JB....and I do appreciate these comparisons. I too grab off the curb when I see something that could be of use. Nice to know I am not alone in that. Keep sharing your wisdom...keep sharing that humor. It is so very much appreciated on a wet Saturday AM. PS...never registered a mower ever!
@@joebarzo9935 JOE! Gotta keep it real in these videos right? Can’t let a good mower go to waste! Whether for profit or for purpose. Thanks for watching bud! I hardly ever register my newer mowers only because I end up selling them at the end of the season and leave that for the new owner. 👍 you’re in good company!
The side discharge is better than the rear discharge. When I picked up my new Toro mower last year, I ended up getting two new chutes from Toro. I have the rear wheel drive and it works great.
I have an old Lawn Boy muncher I bought at Home Depot (who knows when!); oil changes, new plug and air filter - new wheels 2 years ago and it starts 1st or 2nd pull every year. It's rear wheel drive, which on my sloped lawn is way better than FWD.
I’ve been running that same older recycler since it first came out and it still runs great. Best thing I did to it along with replacing a number of other parts is added a fuel filter and shut off valve along with an hour meter/tach. Definitely agree with you JB about that oil fill placement, such a pain in the ass! I’ve tried a number of different blades on this mower but the best one for it I s actually the Toro atomic blade it comes with, who would’ve thought! I did add a big league striper to it and it does a great job, although hard to use the bagger with it. Love the channel, you’ve definitely helped me out with plenty of good advice and tips!
Hello, About a month ago I bought a Toro 22 recycler with a Kohler engine and fwd, for $150 at a estate sale, like new condition, it’s the best lawnmower I have ever owned. I don’t know much about all the details of which engine manufacturer is better, so I’m learning from your CZcams channel. I really like my lawnmower.
I use the drain plug on the bottom of the engine on my Toro Super Recycler... I rest the entire mower on top of my large sturdy drain pan. It's a lot cleaner job doing it this way!
My Toro is 2 years old started acting funny and I thought maybe it was the coil so started down tearing it down to the flywheel cuz I wanted to check the key you're nut as loose I tighten it back up started right up no problem since it happened thank you for the video
I had a similar one to the older Toro, except it had the Briggs engine and stow ability. Nice mower and cut great, but I hated the drive bale. The front wheel drive sucked on the hill in my yard. Ended up grabbing a new Honda Hrx 217 vka from Home Depot for $699 after watching all your videos.
Update: ((optional add on) Toro part number 144-6377 traction assist handle kit) does fit all new Toro mowers that have the new baby carriage curved shape. IMO you could make your own Toro's BTAH (Black Traction Assist Handle) from 2 pieces of wood in ((L) shape) and some bolts and washers. Toro's BTAH converts Toro's PPM (Personal Pace Mowers) (which requires a person to push Toro's heavy mower forward before the self-propelled drive kicks in) to ((easily without effort) controlling Toro's self-propelled drive with just your fingers and hands without moving forward). This is needed on steep hills where you need the Toro mower to pull you and this powerful mower up the hill without any effort on your part. The powerful Toro mower can do this only with BTAH and not by Toro's PPM (extra exercise mode). Without BTAH you end up pushing this heavy Toro mower up the hill. Thank you for your help and understanding on this Toro (back breaking) mower issue.
My friend received two chutes for some reason when he registered his 21462 last year. We tried one on my 2015 model 20333 and it worked. I enjoy using it better than my original side chute. We both think the rear works better. I almost always use discharge. I'm retired so mow often so can follow the 1/3 height rule but sometimes the grass is wet. Thanks for your videos and the folks who comment.
Great video as always!! I’ve had the pleasure of using both of these and I completely agree with your assessment. They do seem to lack a little power, but slow and steady will get the job done. Thanks again!!! Go Bills
I can live without a side discharge. Mine just gathers crass clippings and you need to clean it out every mow. Thats where my deck started rusting. Many years ago i hit something with my side discharge and broke the plastic. The door wouldnt stay closed when mowing. I permanently closed with self tapping screws. Fast forward years and the deck was rusting out from that area. I couldnt clean it out and honestly i wouldnt have anyway. I replaced the deck and fixed the door and i just lift it up and clear any clippings after each mow.
Great comparison, Toro goes to fast, It drags you across the lawn. I slow mine down by pushing down on the handle which makes the front wheels spin more without getting enough traction. Which works fairly good but will probably wear front wheels out faster.
Great video, I have a content idea…I have a 1995 toro super recycler and a 2012 Honda hrx, once fall come I only use my toro recycler because of how efficiently it mulches leaves(chops them up so fine you can not even see them). My Honda even with two blade barely chops them up, sometimes leaves are still whole after running them over. Maybe you could do a video about why this happens and what the benefits are of mulching leaves instead of raking, just a thought…and by the way, the toro starts first pull even after a long winter.
Great comparison JB! Pretty nice find too! I’m thinking maybe a light coat of fluid film on the underside would help prevent any future rusting. Definitely like the side discharge better than rear discharge. Mowers today are not built to last. So they can sell you a new one. Really nice content and great editing! Getting some much needed rain! Was great seeing you again! Cheers buddy!
@@jaybooth4815 hey Jay! Totally agree bud! Some fluid film would help! Appreciate the positive feedback on the editing! Loving this rain! We got the better part of two inches! Awesome hanging out with you the other day! Got some good info coming out on your mower next week!
I had an old recycler hand me down. The orange for the float bowl broke. Went looking for a seal kit, it was like 9 bucks. Whole new carb was around 12 bucks. Guess which one I got lol.
Hello! Big fan of your channel! Really enjoy watching and learning from your videos! I have not seen too many if any videos on husqvarna walk behind mowers? Are they not any good or you just not a fan of them?
@@Kevin_Hansen hey Kevin! It’s not that I’m not a fan of husqvarna mowers I just don’t see many of them in my area. They stopped making them a few years ago and I just don’t see them pop up all that much. I should try to find one to review. Appreciate you being a cool fan of the channel my friend!
@@GarageGear Awesome! Thanks for the reply! I’m in Jacksonville, FL, the Husqvarna AWD walk behind always seem to be on my local FB Marketplace, I don’t really know much about them, I think to myself, if they are so good, why so many for sale..lol. Thanks for the great content! I’ll look out for any future videos on Husqvarna if you come across any, maybe I can send one up to you…lol! Later!
The only thing I like about the Toro is the color I’m a Honda fan .i c a Ferris WW15 in my future in the next year maybe 2 . I can send it 2 you to do a video if you’d like
@@GarageGear yes. It will be next year . I did a typo it’s model FW15 . It’s been out for awhile now,but I don’t think there is anything that compares or competes with it today . I looked at a Scag and a Exmark .
Great video. For a hobby repair guy, i disagree on cleaning carburetors. Only because I happen to enjoy doing it. It sometimes takes 3 or 4 tries on the bad ones, but once clean and tuned correctly, they just seem to work better with the host engine. But all this effort only makes sense if you ha e the time to take, of course.
Agreed JB! I think that's the part I actually like though - finding that last tiny blockage in a jet or passage... It can be pretty gratifying to make something run well again.
Hey JB great video and great information as always! How does someone find out what kind of power equipment you might have for sale after you fix a piece you find?
Hi JB. Great video as usual. Can you please do a review or your opinions on the Honda HRC 216 Commercial mower. I know they’re expensive and no longer produced , but I would still love to see your thoughts on this mower. Thanks so much and keep up the great work.
I have had the newer Toro for a few seasons. I use it to mow my half acre lot, and so far, it has not had any problems. Do I expect it to last forever, nope. I actually bought it because it did not have the personal pace stuff. I prefer the grab lever. Is the vortex a gimmick, probably, but it played no role in my purchase decision.
Hey! Can you list the spark plugs and air filters (in a pack preferably for money saving values) and your other maintenance things for the new toro you showed? My toro is the exact same as that new one you showed and I would love to see your recommendations!
@@officialnotonlyjames hey James! Here is a link to an air filter pack to save you some money! amzn.to/46ddVcH As far as spark plugs go I just clean them once a season to keep them running smooth! 👍
I have a Toro recycler that also is a personal pace machine. I was wondering, how easy it is to remove and replace the drag flap that it came with? It is not very old and it is already in pretty sorry shape.
@@johnnykrauze hey Johnny I wasn’t at the parade but I was at the 10k race this morning running and at the beer tent for nerds gone wild last nite. Were you at either of those?
I actually just picked up one of those older toros with the Kohler engine free in my town in real good shape. Needs a new auto choke thing already ordered and I think the carburetor needs cleaned. I have a like/hate relationship with the Kohler engines these have. Easy and quiet but they have a fair share of issues as well. Eventually I might swap a older honda engine onto it if the Kohler doesn't last.
Hi! New viewer here! I am looking for a nice push mower for my new lawn. Should I look for an older toro recycler on Facebook? Like a late 90s or early 2000s? Should I buy new? Honda? Help lol
@@matthewrozumialski8196 hey Matthew if you’re good with repairing things go with those older toro. If not so much I would look at the Honda! Welcome to the tribe my friend!
@@GarageGear I have always love toros. I use to have a bigger yard and had a zero turn. But now a much smaller yard and want to find a nice push mower.
Not too much of a difference through the years between these 2. Same basic performance as well. I'll give the old one the win because the price was right 😉.
@@GarageGear I got my first Toro Recycler today, I've been rocking the Craftsman M230 for 4 years which my purchased of FB marketplace for $150 and the thing was brand new, the guy I purchased it from delivered it in it's original box on open. Unfortunately the Craftsman M230 can't be stored vertically. I love the 163cc for my yard but I need the storage space. Watching your video convinced me to make this move. First mow of the recycler will be tomorrow morning here in Dallas, TX and my grass is ready for it. Would love to have the supper recycler but that thing looks way too bulky and a little flimsy, I did not like the feel. Let's see how this new Toro of mine hold up tomorrow morning.
i like the recycler , but the drive to the wheels is always a problem.....fwd or rwd....especially those plastic gears on rwd wheels. yeah toro almost gets it right......again........cheaped out........
This line is a big box store line made to a certain price point. Having said that, these units are far better than the junk that’s out there in the same price bracket.
@@LL-mt2nz EVERYTHING is made to a price point. But yes, mtd.murray.and most of the rest is lower grade garbage. Timemaster n recylcler owner here. I know these mowers
Vortex, ASS discharge, and washout ports are three biggest gimmicks going. TORO has shit the bed with the DIY community IMO. Even their TRX snow blower that was supposed to be the competitor to the Ariens RapidTrack was a bigger joke than Biden vs Trump on Thursday. TORO will never get one cent of my money ever again.
@@GarageGear Being statuesque isn't the answer. You make the videos, look at back at them and tell me you don't overly talk with your hands and I'll believe you. You post the videos, you should be open to feedback. You have great content that is really informative but you talk so much with your hands you make the videos unwatchable.
Here’s a LINK to the PRESSURIZED SPRAY CAN used in this video. Thank you for supporting the channel! 👍
👉 SPRAY CAN amzn.to/4eKhJpJ
👉 WD40 amzn.to/3XLbbBk
JB, it was a honor and pleasure to run into you the other day at the Depew post office. I recognized your voice as you spoke to the clerk and then recognized your face. I’m a subscriber to your channel and totally enjoy all the videos. They are to the point and informative and I have learned a lot from them. I have a Toro recycler mower I purchased 2 years ago. It has served me well so far but I wish changing oil would be an easier task.
I'm jealous of you. I'd love to meet Jared one day. He's one of the most honest dudes on YT.
@@paulmysliborski4832and he's as nice in person as on his videos. Took time to chat with me and didn't have to.
Thanks for being a cool fan and following along. It was awesome meeting you too, Mike! Always cool running into a fan of the channel! Does your mower have a low dipstick like the older model?
Appreciate you, Paul! Someday we will meet!
@@GarageGearnope. Has the high dip stick. I guess I’ll have to get one of those pumps to suck out the old oil. It is what it is.
I’ve still got my 19 year old Toro recycler. The Tecumseh engine on it is still going strong and the deck doesn’t have a lick of rust on it even though most of the paint under it is gone just from wear. I just brought it to my plot of land in Bear Lake and I recently posted a video of it cutting down the brush. We will be returning there in 2 weeks to finally do our trip I was talking about.
@@TecumsehRulesbcserk awesome BCSERK I’ll will check it out! Impressive it’s 19 years old and in good shape! 👍
All I can say is that I still have my 06 Toro recycler personal pace mower, Tecunseh engine, rear wheel drive, and to this day starts on the 1st pull every time. Original deck very minor rust, original carburetor, wheels and cablesI. I did have to replace the RWD transmission last year. Every year the oil is changed, new filter and plug. Blade is sharpened /balanced about 5 or 6 times each growing season . Fuel is always treated with an ethanol fuel treatment. The underside is water port washed after each use and is run 5 minutes or more to dry the underside and stored out of the weather in a shed. You take care of your mower and it will give you years of loyal service.
Sure well! Yours will thank you after each season too!
I love finding free mowers along the side of the road!
@@BigDaddysGarage if it’s free it’s for you right?!?! Have a good week flint!
@@GarageGear 👍😂
I do love a good Quagmire insert JB....and I do appreciate these comparisons. I too grab off the curb when I see something that could be of use.
Nice to know I am not alone in that. Keep sharing your wisdom...keep sharing that humor. It is so very much appreciated on a wet Saturday AM. PS...never registered a mower ever!
@@joebarzo9935 JOE! Gotta keep it real in these videos right? Can’t let a good mower go to waste! Whether for profit or for purpose. Thanks for watching bud! I hardly ever register my newer mowers only because I end up selling them at the end of the season and leave that for the new owner. 👍 you’re in good company!
@@GarageGear - With the GarageGuy and GarageGal...the BEST company ever. Happy 4th to you.
@@joebarzo9935 thanks, Joe! Appreciate you as always! Happy 4th of July to you and your family as well!
The side discharge is better than the rear discharge. When I picked up my new Toro mower last year, I ended up getting two new chutes from Toro. I have the rear wheel drive and it works great.
@@timraber6575 awesome Tim! Thanks for sharing!
im curious why mine did not come with the rear discharge out of the box.
@@sunnydelight4991 you have to register the mower with toro to get it
@@GarageGear very helpful. Thanks took me about a minute and I got that thing on the way🫡
I have an old Lawn Boy muncher I bought at Home Depot (who knows when!); oil changes, new plug and air filter - new wheels 2 years ago and it starts 1st or 2nd pull every year. It's rear wheel drive, which on my sloped lawn is way better than FWD.
@@jerryq1000 awesome Jerry thanks for sharing
I’ve been running that same older recycler since it first came out and it still runs great. Best thing I did to it along with replacing a number of other parts is added a fuel filter and shut off valve along with an hour meter/tach. Definitely agree with you JB about that oil fill placement, such a pain in the ass! I’ve tried a number of different blades on this mower but the best one for it I s actually the Toro atomic blade it comes with, who would’ve thought! I did add a big league striper to it and it does a great job, although hard to use the bagger with it. Love the channel, you’ve definitely helped me out with plenty of good advice and tips!
@@Zippernuts315 awesome zipper! Appreciate you sharing this information with the community! Thanks for the positive feedback! 👍
Hello, About a month ago I bought a Toro 22 recycler with a Kohler engine and fwd, for $150 at a estate sale, like new condition, it’s the best lawnmower I have ever owned. I don’t know much about all the details of which engine manufacturer is better, so I’m learning from your CZcams channel. I really like my lawnmower.
@@danielg.1955 awesome Daniel! You got it for a good price! Thanks for being a cool fan!
I use the drain plug on the bottom of the engine on my Toro Super Recycler... I rest the entire mower on top of my large sturdy drain pan. It's a lot cleaner job doing it this way!
@@johngrossbohlin7582 I bet it is! Thanks for sharing John!
I just bought the toro 21445 and to me it works great, I also did do the oil change at the 30 minute mark. Just gotta take care of the mower now
@@Jared_Dudley smart move kush! Thanks for watching!
My Toro is 2 years old started acting funny and I thought maybe it was the coil so started down tearing it down to the flywheel cuz I wanted to check the key you're nut as loose I tighten it back up started right up no problem since it happened thank you for the video
Awesome! Glad it was helpful for you. Enjoy the mow this season.
I had a similar one to the older Toro, except it had the Briggs engine and stow ability. Nice mower and cut great, but I hated the drive bale. The front wheel drive sucked on the hill in my yard. Ended up grabbing a new Honda Hrx 217 vka from Home Depot for $699 after watching all your videos.
@@joevoegeli4959 awesome Joe! Thanks for sharing and watching! 👍👍
I have a 10-12 year old Toro it is build well - the new ones seem to be cheapened and have plastic toy mower feel to them.
Couldn’t agree more!
Update: ((optional add on) Toro part number 144-6377 traction assist handle kit) does fit all new Toro mowers that have the new baby carriage curved shape.
IMO you could make your own Toro's BTAH (Black Traction Assist Handle) from 2 pieces of wood in ((L) shape) and some bolts and washers.
Toro's BTAH converts Toro's PPM (Personal Pace Mowers) (which requires a person to push Toro's heavy mower forward before the self-propelled drive kicks in) to ((easily without effort) controlling Toro's self-propelled drive with just your fingers and hands without moving forward).
This is needed on steep hills where you need the Toro mower to pull you and this powerful mower up the hill without any effort on your part.
The powerful Toro mower can do this only with BTAH and not by Toro's PPM (extra exercise mode).
Without BTAH you end up pushing this heavy Toro mower up the hill.
Thank you for your help and understanding on this Toro (back breaking) mower issue.
@@AAa-qd8hb thanks for sharing this
My friend received two chutes for some reason when he registered his 21462 last year. We tried one on my 2015 model 20333 and it worked. I enjoy using it better than my original side chute. We both think the rear works better. I almost always use discharge. I'm retired so mow often so can follow the 1/3 height rule but sometimes the grass is wet. Thanks for your videos and the folks who comment.
@@turtle522 awesome turtle! Thanks of sharing this with the community! 👍👍
Give me the old any day ✔️💯💪🏾
@@bigsonslawncare ROCK ON Bigsons!
@@GarageGear Absolutely 💪🏾
Great video as always!! I’ve had the pleasure of using both of these and I completely agree with your assessment. They do seem to lack a little power, but slow and steady will get the job done. Thanks again!!! Go Bills
@@stevepelino5986 you got it! Thanks for watching! Go Bills!!!
Got the same old toro, with some rust on the bottom. Considering spraying rust converter and respraying the paint on the bottom
Sounds like a decent idea! You’ll have to give us an update.
Shoot!....I live in Albany!...if I was closer I would have grabbed that, especially with your attention to detail, JB!...Paul
@@gospos1 hey Paul! I still have! Have to shoot one more video with it and then she’s outta here! lol! Appreciate you bud!
I can live without a side discharge. Mine just gathers crass clippings and you need to clean it out every mow. Thats where my deck started rusting. Many years ago i hit something with my side discharge and broke the plastic. The door wouldnt stay closed when mowing. I permanently closed with self tapping screws. Fast forward years and the deck was rusting out from that area. I couldnt clean it out and honestly i wouldnt have anyway. I replaced the deck and fixed the door and i just lift it up and clear any clippings after each mow.
@@E150GT thanks for sharing! Glad it worked for you!
Great comparison, Toro goes to fast, It drags you across the lawn. I slow mine down by pushing down on the handle which makes the front wheels spin more without getting enough traction. Which works fairly good but will probably wear front wheels out faster.
Thanks for the positive feedback. Yeah, it’s an odd problem to have on this mower.
Great video, I have a content idea…I have a 1995 toro super recycler and a 2012 Honda hrx, once fall come I only use my toro recycler because of how efficiently it mulches leaves(chops them up so fine you can not even see them). My Honda even with two blade barely chops them up, sometimes leaves are still whole after running them over. Maybe you could do a video about why this happens and what the benefits are of mulching leaves instead of raking, just a thought…and by the way, the toro starts first pull even after a long winter.
@@rogerfelty528 thanks Roger! Appreciate the idea bud! Hold onto that toro! You got a gem there!
Great comparison JB! Pretty nice find too! I’m thinking maybe a light coat of fluid film on the underside would help prevent any future rusting. Definitely like the side discharge better than rear discharge. Mowers today are not built to last. So they can sell you a new one. Really nice content and great editing! Getting some much needed rain! Was great seeing you again! Cheers buddy!
@@jaybooth4815 hey Jay! Totally agree bud! Some fluid film would help! Appreciate the positive feedback on the editing! Loving this rain! We got the better part of two inches! Awesome hanging out with you the other day! Got some good info coming out on your mower next week!
Looking forward to seeing it! Thanks again! Enjoy the rest of the weekend. Say hi the garage gal for me. Cheers my friend!
@@jaybooth4815 will do! Interested to see how your lawn mower video will turn out by the end of the week!
@@GarageGearI’m sure it will be great like all your videos!
When I first saw your oil suction pump, my 1st thought was: "What in the hell is JB doing with a plastic bong? 🤣
@@swampyankee72 hahahahah never thought of it that way until just know. I guess I’ll never look at it the same way again. Thanks for watching swampy !
I had an old recycler hand me down. The orange for the float bowl broke. Went looking for a seal kit, it was like 9 bucks. Whole new carb was around 12 bucks. Guess which one I got lol.
@@BenNawrath I already know lol! Swapping these is cheap and easy! Have an awesome weekend Ben!
@@GarageGear same to you bro
Hello! Big fan of your channel! Really enjoy watching and learning from your videos! I have not seen too many if any videos on husqvarna walk behind mowers? Are they not any good or you just not a fan of them?
@@Kevin_Hansen hey Kevin! It’s not that I’m not a fan of husqvarna mowers I just don’t see many of them in my area. They stopped making them a few years ago and I just don’t see them pop up all that much. I should try to find one to review. Appreciate you being a cool fan of the channel my friend!
@@GarageGear Awesome! Thanks for the reply! I’m in Jacksonville, FL, the Husqvarna AWD walk behind always seem to be on my local FB Marketplace, I don’t really know much about them, I think to myself, if they are so good, why so many for sale..lol. Thanks for the great content! I’ll look out for any future videos on Husqvarna if you come across any, maybe I can send one up to you…lol! Later!
@@Kevin_Hansen I’ll be keeping an eye out my friend! Thanks for being a cool fan!
The only thing I like about the Toro is the color I’m a Honda fan .i c a Ferris WW15 in my future in the next year maybe 2 . I can send it 2 you to do a video if you’d like
@@marklloyd4153 that would be awesome my friend! 👍
@@GarageGear yes. It will be next year . I did a typo it’s model FW15 . It’s been out for awhile now,but I don’t think there is anything that compares or competes with it today . I looked at a Scag and a Exmark .
@@marklloyd4153 Ferris makes a great machine! 👍
Great video. For a hobby repair guy, i disagree on cleaning carburetors. Only because I happen to enjoy doing it. It sometimes takes 3 or 4 tries on the bad ones, but once clean and tuned correctly, they just seem to work better with the host engine. But all this effort only makes sense if you ha e the time to take, of course.
Don’t get me wrong Ken! I don’t mind cleaning carbs too. But these are probably the only engines I say they about. They get pretty finicky!
Agreed JB! I think that's the part I actually like though - finding that last tiny blockage in a jet or passage...
It can be pretty gratifying to make something run well again.
@@kenjones4139 I too get a lot of satisfaction when that happens
I'm amazed it took so long for Toro to put a decent belt cover on there mowers. On any other self propell mower that's a standard feature.
Yeah it took them a while!
A front wheel drive mower for me is a no go. If only I had a flat yard.
@@6527dave totally get it my friend! Thanks for watching
Thank you Jb for the video. You are awesome
@@justinkolan5500 appreciate you Justin! Thanks for being an awesome fan!
Hey JB great video and great information as always! How does someone find out what kind of power equipment you might have for sale after you fix a piece you find?
Thanks for the positive feedback. I usually post on Facebook Marketplace and sometimes on Instagram.
@@GarageGear awesome thanks for the information!
Hi JB. Great video as usual. Can you please do a review or your opinions on the Honda HRC 216 Commercial mower. I know they’re expensive and no longer produced , but I would still love to see your thoughts on this mower. Thanks so much and keep up the great work.
@@harishdevi4344 I’ll see what I can do about getting one! Would like to try one out👍
I have had the newer Toro for a few seasons. I use it to mow my half acre lot, and so far, it has not had any problems. Do I expect it to last forever, nope. I actually bought it because it did not have the personal pace stuff. I prefer the grab lever. Is the vortex a gimmick, probably, but it played no role in my purchase decision.
Thanks for sharing your input. Good for the community. Enjoy the mow this season!
Great video JB. 👍🙏👍🙏
Thanks a lot Ray! What is happening this weekend?
love the side by side comparison.....all in all....i'd rather have the older one. Vortex is a gimmick
@@davebruins8623 Rock On Dave! If there is any data on that vortex I would like to see it. What’s toro got to hide?
Hey! Can you list the spark plugs and air filters (in a pack preferably for money saving values) and your other maintenance things for the new toro you showed? My toro is the exact same as that new one you showed and I would love to see your recommendations!
@@officialnotonlyjames hey James! Here is a link to an air filter pack to save you some money! amzn.to/46ddVcH
As far as spark plugs go I just clean them once a season to keep them running smooth! 👍
@@GarageGear thank you so much! I love your content!
@@officialnotonlyjames appreciate you james
I have a Toro recycler that also is a personal pace machine. I was wondering, how easy it is to remove and replace the drag flap that it came with? It is not very old and it is already in pretty sorry shape.
Drag flaps on these are usually easy to pop out. Can bend them and pop in
Were you at the Lancaster 4th of July parade? I think I recognized you.
@@johnnykrauze hey Johnny I wasn’t at the parade but I was at the 10k race this morning running and at the beer tent for nerds gone wild last nite. Were you at either of those?
@@GarageGear no, there was a guy in Lancaster that looked like you. I'm glad I did not say hi to the guy now. Lol
@@johnnykrauze must have been my evil twin lol!
I'm slightly embarrassed to say I got a used 18V Ryobi mower for cheap. I sharpened the blade and can do my lawn in 3 batteries.🎉
How big is your yard?
I actually just picked up one of those older toros with the Kohler engine free in my town in real good shape. Needs a new auto choke thing already ordered and I think the carburetor needs cleaned. I have a like/hate relationship with the Kohler engines these have. Easy and quiet but they have a fair share of issues as well. Eventually I might swap a older honda engine onto it if the Kohler doesn't last.
@@iowafox2206 nice iowafox! Like the idea of the older Honda engine! I would go for it and make it unstoppable!
Older is definitely better!...says this old man. 😝🤣
Ten years old and she’s still ticking’! Didn’t you just turn 27 or 28 🤔???
@@GarageGear 🤣🤣🤣 Not sure where you heard that
@@The_Mace I got sources….
@@GarageGear Apparently, you need new sources 🤣
@@The_Mace their reliability lately hasn’t been the best but I’ve been working with them for a while so I give them the benefit of the doubt.
I think you covered this but do you think the old super recylcer is better than the new one? 2019 and older?
@@Clearanceman2 the older ones are definitely better. The fur the back you go the better they get pretty much 👍
@@GarageGear Thanks!
Hi! New viewer here!
I am looking for a nice push mower for my new lawn.
Should I look for an older toro recycler on Facebook? Like a late 90s or early 2000s? Should I buy new?
Honda? Help lol
@@matthewrozumialski8196 hey Matthew if you’re good with repairing things go with those older toro. If not so much I would look at the Honda! Welcome to the tribe my friend!
@@GarageGear I have always love toros.
I use to have a bigger yard and had a zero turn. But now a much smaller yard and want to find a nice push mower.
The Lawn Mower Sharpener Tool link doesn't work?
Thanks for letting me know . Here’s a new link amzn.to/3VT9oHS
@GarageGear i have the older model. think it would be possible to replace the front wheels with those of the newer model?
@@i_Doc potentially could do that. Worth a shot.
@@GarageGear i'm more curious as if they'd fit or not. you may not have the info. thanks for the reply brother!
@@i_Doc I haven’t tried but I’ll look into it. Thanks for the idea
Do you have a tutorial on how to change a john deer r54rkb ? I'm stuck 😂
@@frankiearmstrong4109 change what? Oil?
@@GarageGear 😄 🤣 my fault I forgot to say its the self propelle belt
@@GarageGear I have fitted a new belt on my jx75 but not a clue on this model
@@frankiearmstrong4109 got it! for that model I do not have a video on it. I rarely see those mowers by me.
@@GarageGear no problem thank you for replying
Will Honda wheels last longer, do they have bearings?
@@guitarandotherthings6090 Honda hrx wheels have a rubber tread and ball bearings
@@GarageGear Thanks!
Right versus wrong on Toro Walk behind mower s
@@robertmailhos8159 thanks for watching Robert!
@@GarageGear you are welcome garage gear
This was just a different model of the old recycler the other ones have almost the same exact thing
@@user-bh2tr6pp5c thank you for sharing and watching Tracy👍
Hey JB - did you sell it? How much? Thumbs up from Iowa.
Not yet. I have one more video to do on it. Will release it soon. Thanks for watching from Iowa!
Not too much of a difference through the years between these 2. Same basic performance as well. I'll give the old one the win because the price was right 😉.
@@smallblock412 price was definitely right Smallblock! Gave it some new life too. Enjoying your summer so far?
@@GarageGear absolutely, bring on the heat!
your neighbor buys mower for you to review I see.
@@yoursclhelper yep and I usually do an oil change for them.👍
@@GarageGear I got my first Toro Recycler today, I've been rocking the Craftsman M230 for 4 years which my purchased of FB marketplace for $150 and the thing was brand new, the guy I purchased it from delivered it in it's original box on open. Unfortunately the Craftsman M230 can't be stored vertically. I love the 163cc for my yard but I need the storage space. Watching your video convinced me to make this move. First mow of the recycler will be tomorrow morning here in Dallas, TX and my grass is ready for it. Would love to have the supper recycler but that thing looks way too bulky and a little flimsy, I did not like the feel. Let's see how this new Toro of mine hold up tomorrow morning.
@@yoursclhelper thanks for sharing my friend
i like the recycler , but the drive to the wheels is always a problem.....fwd or rwd....especially those plastic gears on rwd wheels. yeah
toro almost gets it right......again........cheaped out........
It’s how they roll Harry! 🤷♂️
This line is a big box store line made to a certain price point. Having said that, these units are far better than the junk that’s out there in the same price bracket.
@@LL-mt2nz EVERYTHING is made to a price point. But yes, mtd.murray.and most of the rest is lower grade garbage. Timemaster n recylcler owner here. I know these mowers
Vortex, ASS discharge, and washout ports are three biggest gimmicks going.
TORO has shit the bed with the DIY community IMO. Even their TRX snow blower that was supposed to be the competitor to the Ariens RapidTrack was a bigger joke than Biden vs Trump on Thursday.
TORO will never get one cent of my money ever again.
@@paulmysliborski4832 Toro has a long way to go to making us happy, Paul! What’s up for the rest of the weekend?
@@GarageGear Gonna grill! 🍔
The talking with the hands in this guys vidoes is beyond annoying. So hard to focus with hands moving all over the place.
@@justwam7619 please send me a better video demonstrating how to stand perfectly statuesque while going over these mowers.
@@GarageGear Being statuesque isn't the answer. You make the videos, look at back at them and tell me you don't overly talk with your hands and I'll believe you. You post the videos, you should be open to feedback. You have great content that is really informative but you talk so much with your hands you make the videos unwatchable.
Yeah, I do not care for that rear side chute! Pass!
@@GiveMeLibertyOrGiveMeDeath1776 thanks for sharing and watching tea party