2006-2009 Ford Fusion/Mercury Milan Door Handle Replacement
Vložit
- čas přidán 26. 08. 2024
- In this video I go through each step and show how to replace an interior door on a 2006 Ford Fusion SEL. This repair will apply to 2006-2009 Ford Fusions and Mercury Milans.
This is a very easy DIY project that anyone can do. Enjoy the video and good luck.
Subscribe to my Channel: bit.ly/3kwzddS
Parts Needed for this DIY:
New or Used Door Handle
Get a new one here - amzn.to/3szCjkR
Tools Needed for this DIY:
7mm & 8mm Socket
Ratchet
Flathead screwdriver or claw tool
T20 Torx Bit
Small pick or very small flathead
The purpose of the channel is to help others save money by fixing things themselves. In my videos I go step by step and try to make sure that I am clear so that the viewer can follow along with the video. I hope you enjoy and God Bless.
No copyright infringement intended.
DISCLAIMER: DannyDoItAll does not assume any liability, including, but not limited to: injury, loss, or property damage incurred as a result of any information contained within this video. All of the aforementioned is the sole responsibility of the viewer. This video is for informational purposes only and is to be used at your own risk. Safe practices are always encouraged, especially when working on vehicles or any other DIY project, and while using any and all types of tools. This video does not guarantee any particular result.
Great video. Did this myself in a few minutes. Note, I didn't remove the electrical connections. The cable was long enough that I could rest the panel on the ground while working on the handle.
Best video ever I changed all 3 of my door handles less then 10 minutes no cap
And it’s 95 degrees outside
The driver's doorhandle broke on my son's 2009 Mercury Milan the day before Prom! I'm a panic, I searched for a way to fix ourselves and came across this step-by-step video. THANK YOU so much for posting this! I am not mechanically inclined, but followed each step and fixed it ourselves!! Crisis averted! Thanks again!
Good video. One of the best I've seen. Very detailed
When the drivers door of my '08 broke, I learned that if you pull the door handle and lock at the same time the door opens. That was 5 years ago. Doubt I'll ever replace it.
You'd think that, until the lock itself breaks too :D
@@KRonSimis 245,000 on it, in the rust belt. There are three other doors.
@@m1t2a1 😹😹
Thank you for this video! My husband and I successfully replaced the driver's side front door handle on a mercury milan. There were more cords and 2 screws on the door panel not one but all the details of your video provided enough information. It was one of the easiest repairs we have ever done.
Thank you
Yep...Have the same issue now. OPENING DOOR FROM THE OUTSIDE ALL THE TIME, NOT CUTE! TY TY!
Glad to help hopefully you got it fixed.
I feel that
Excellent video, went on quickly no problems except getting the initial tab part out. I used a stanley box cutter blade to wedge it out. Thank you for your step by step very helpful!
Dude thank you so much! Got it done without breaking any plastic tabs at all and saved a lot of money!
Awesome
Excellent instruction. Great attention to detail.
Thanks 4 sharing PUMAS wins tonight
nice ride brother i would like to add mods to my 08 fusion but seem like good part are hard to find for a good price keep up the content on your fusion....
Thanks I will have some more videos coming. I agree most of the mods are expensive.
Worked like a charm thanks
Great. I just broke the drivers door handle on my fusion the other day. Unfortunately these things are always breaking.
I did this replacement but my key fob button isn’t activating the lock idk if it’s not strong enough now because it’s been broken for so long or if I just connected it wrong but the handle works fine and the lock it just doesn’t work with the key lock button any suggestions ???
Thanks!
Your Welcome.
Quick question is that the same way you would put in a driver side door?
It is similar not exactly the same. The configuration is slightly different behind the door panel as it is bigger and there are more wires on the wire harness.
Would this be the same for a power lock door handle?
Yes, this video is done on a car with power locks.
what if when you try to place the door handle latch cable into the new handle it’s extremely tight
You can try to put a little grease on it to see if will slide on. I bought an aftermarket door handle that I had that issue with. I put some grease on it and pushed hard and it slid on.