I can't believe u skipped the aak-4000 dyno, it's probably there best seller, it would be nice to compare aginst other 4k amps for bragging rights.. I can imagine it does a lot better than most other 3.5k and 4ks because it has dual power/ground inputs unlike the sundown 4k only has single inputs
Daniel Harrell I have some brand new universal CT sounds volt meter rca input and output so it works with any amp. Turn on, clipping, attenuation, & volt meter. 3 for $50 shipped, or $20 a piece. Amazon has them for $29.99.
will you do the aak-200.4? the sundown 200.4 did very well, but is way more $. I bought the DB 200.4 a few weeks ago and love it.. just wanted to know if it makes the same power as the SD for way less money.. thanks great videos. . thumbs up
I've clamped more power from the db 200.4 than the sundown done. But they are actually the exact same board. Both done around identical power on the dyno.
+150 DB good to know man, I seen the SD dyno video and it very well.. the dB is rated lower on paper in bridge mode but the crossover section is better on the dB.. I'm very happy with my dB 200.4 for half the price either way
@@tankdog03ify got pictures an videos of doing 158s on music an burping a 160 n change. Whole builds done changed now tho. Went to 4 custom 15s on 2 tfhe 9.0s clamping over 11k @1.7ohm ☺️ tuning the amps Sunday busted the windshield for the second time. Have yet to meter new setup as it can't keep a windshield. Guessing a 163+. Alphards amps are awesome, he just couldn't wait on 4 7500s No need to lie. Builds all over Facebook.
nice, I'm considering ordering the latest models D.B, from all that you've seen where brands or amps would you say are the most efficient? I need maybe a 6500k or 7500k
What is the best amp you've tested that runs good on lower power. And most efficient . And lowest price. I have two Sundown x10v3. I need a good amp that's not super expensive but a good reliable amp
I noticed the AD-1's temperature starting to "warm up" a bit. Are the fans from the dyno?, or the amp? (I mean, obviously after maxing out a 5.5K watt amp. while doing several "runs", things tend to warm it up)
I've gotten 4400+ clean at 1.3ohm an 14.1v in a truck. Tested the 4k as a buddy had 3. I have the 5.5k, and 1500.2...had the 200.4 but I sold to him, now have a 180.4 to go with the other 2. They are amazing. And will say I clamped more out of the 5500 up to clipping then what the dyno showed 😎 S&I for the win!
Indeed, that is correct. Though, in this particular case I think he was stating it as "it did a little over rated". Not that it was specifically "over rated". Not trying to nit pick at your comment, I'm just bored with nothing better to do at the moment but respond to comments that probably were just fine to begin with. Twinky out
Sundown don't use this board at all. Accually none of them i believe. They do use the same buildhouse. Even the 7500 sundown has is a different board then alphards 7500. Personally think alphards 7500 is a stronger 7.5k board.
So someone ordered this amp brand new. Then the new amp was opened for this amp dyno. I may not be the majority but now to me it’s not a brand new amp.. I have emailed a few times regarding products and never get response. One was regarding Ampere amps, Another was an open box item, Another was about machined terminals and blocks. No response ever. I experience this often with “ car audio “ companies .. Sound Solutions Audio is the worst of all, doesn’t matter if you call and leave a message, email, they do not respond. Def buyer beware when purchasing from SSA..
That's because ssa purposely list stuff on there site they do not stock, then they push you into buying there ssa products they do stock. Just like they listed there sundown subs $10 cheaper then the sale price but had none in stock, I don't believe they are even an authorized dealer for sundown anymore. . But who knows there tactics
I can't believe u skipped the aak-4000 dyno, it's probably there best seller, it would be nice to compare aginst other 4k amps for bragging rights.. I can imagine it does a lot better than most other 3.5k and 4ks because it has dual power/ground inputs unlike the sundown 4k only has single inputs
Yeah I have the 4k its why I am here checking this out.
Same
I wish you would dyno the aak4000 @.5 ohm and 1ohm
Yessss
Great video with the results on the numbers
Just purchased 2 db 3012rs
id like to see dyno of the aak7500 🙂
I wish they would make bass knobs for all. Amps like this one it is crazy
it comes with all AAK amp mono blocks. 2k - 12k
Deeepsound they r some sic ass knobs man I wish they would build a universal one like this but it would probably be over 100$ for the knob
Daniel Harrell I have some brand new universal CT sounds volt meter rca input and output so it works with any amp. Turn on, clipping, attenuation, & volt meter. 3 for $50 shipped, or $20 a piece. Amazon has them for $29.99.
Look up Zachary Davis on Facebook or Instagram He has Slam panda systems makes custom bass knobs
That’s the aak 6k now 😂
Is the 6k better?
I wish you could have done the deaf bounce 2000.1d
That amp is a beast!
Why haven’t you uploaded more videos... :(
I wish you guys would do an IA 40.1! Those seem to never make it onto anyone dyno test!
Are you all ever going to do the 7500
how many AH of lithium u got under there?
love the videos keep them up
will you do the aak-200.4?
the sundown 200.4 did very well, but is way more $.
I bought the DB 200.4 a few weeks ago and love it.. just wanted to know if it makes the same power as the SD for way less money.. thanks great videos. . thumbs up
I've clamped more power from the db 200.4 than the sundown done. But they are actually the exact same board. Both done around identical power on the dyno.
+150 DB good to know man, I seen the SD dyno video and it very well.. the dB is rated lower on paper in bridge mode but the crossover section is better on the dB.. I'm very happy with my dB 200.4 for half the price either way
do the 4k one
can you please do the 7500 I want to buy one but want to see what's really hood
Is there a Dyno for the AAK 6k I just bought one
there a aak-4000 video?
Tyler Truitt I want to see that too. Looking for it
same
I've clamped over 4400w at 1.3ohm an mid 13v. That's with tbe clip limit button pushed in also.
Video or its a lie.. lol
I just got a 4k too, nice amp.. I just want to know where it stands aginst others, like sundown, crescendo and dc
@@tankdog03ify got pictures an videos of doing 158s on music an burping a 160 n change. Whole builds done changed now tho. Went to 4 custom 15s on 2 tfhe 9.0s clamping over 11k @1.7ohm ☺️ tuning the amps Sunday busted the windshield for the second time. Have yet to meter new setup as it can't keep a windshield. Guessing a 163+.
Alphards amps are awesome, he just couldn't wait on 4 7500s
No need to lie. Builds all over Facebook.
nice, I'm considering ordering the latest models D.B, from all that you've seen where brands or amps would you say are the most efficient? I need maybe a 6500k or 7500k
👍👍
Why arent the tests done at a realistic voltage like 12.6v or 13.8v ?
Because most of us will have a panic attack if our voltage is at 13.8v and will literally shit ourselves at 12.6v
i noticed on the gain dial it looks like it starts from 6v - .2v. shouldnt the dial start at with the lower volt?
What is the best amp you've tested that runs good on lower power. And most efficient . And lowest price. I have two Sundown x10v3. I need a good amp that's not super expensive but a good reliable amp
I noticed the AD-1's temperature starting to "warm up" a bit. Are the fans from the dyno?, or the amp?
(I mean, obviously after maxing out a 5.5K watt amp. while doing several "runs", things tend to warm it up)
Do yall sell. The cap banks?
Test the 4000 at 1.33 ohms
I've gotten 4400+ clean at 1.3ohm an 14.1v in a truck. Tested the 4k as a buddy had 3. I have the 5.5k, and 1500.2...had the 200.4 but I sold to him, now have a 180.4 to go with the other 2. They are amazing. And will say I clamped more out of the 5500 up to clipping then what the dyno showed 😎 S&I for the win!
@@150db8 bless you. i have been looking for any good real world stats on this amp and finally found it. def gonna buy, nice bass knob too
The amp is under rated if it is doing over the stated power. Not over rated. Nice video though, always like amp dynos
Indeed, that is correct. Though, in this particular case I think he was stating it as "it did a little over rated". Not that it was specifically "over rated".
Not trying to nit pick at your comment, I'm just bored with nothing better to do at the moment but respond to comments that probably were just fine to begin with.
Twinky out
Can you dyno a team ct sounds 4k plz
Фарту! масти ! АУЕ!!! хороший тест!
Any test on the aak-12k?
Can any one get me 2 of the doomsday amps ? In USA or shipped to USA any one can point me in the right direction thanks
How much for this amp
1200 I got 1 for sell
It's a trendy thing that look
Is that a rebadge sundown
Sundown don't use this board at all. Accually none of them i believe. They do use the same buildhouse. Even the 7500 sundown has is a different board then alphards 7500. Personally think alphards 7500 is a stronger 7.5k board.
That's a teampie amp
That’s what I though too until I researched. This is made by S&I in South Korea. Teampie amps are Chinese copies of these amps.
Doomsday ARU-3000/2
DC 5.0k did more dynamically. Still will stick to DC 😁😁😁
Kris dynamic means nothing
Explain plz ?
Dynamic represent if you're playing music...so basically it means everything
The importance of the dynamic rating wrapped up in such a simple statement. Well done, Kris.
And now to just plagiarize that..... I mean.... eh...
what? you drive around all day playing 40hz?
Wheres these made?
Nevermind
These are made in Korea.
S&I in Korea. Better than zenon boards i personally think. They come with a price tho.
Subscribe
So someone ordered this amp brand new. Then the new amp was opened for this amp dyno. I may not be the majority but now to me it’s not a brand new amp..
I have emailed a few times regarding products and never get response. One was regarding Ampere amps, Another was an open box item, Another was about machined terminals and blocks. No response ever. I experience this often with “ car audio “ companies .. Sound Solutions Audio is the worst of all, doesn’t matter if you call and leave a message, email, they do not respond. Def buyer beware when purchasing from SSA..
That's because ssa purposely list stuff on there site they do not stock, then they push you into buying there ssa products they do stock. Just like they listed there sundown subs $10 cheaper then the sale price but had none in stock, I don't believe they are even an authorized dealer for sundown anymore. . But who knows there tactics
I unsubscribe no reply shocking