Assembly and demonstration of the Best Choice Products SKY1700 Mobility Wheelchair Carrier
Vložit
- čas přidán 11. 01. 2018
- This video demonstrates the assembly of the Best Choice Products SKY1700 Mobility Wheelchair Carrier . I purchased this off of Amazon the link is: www.amazon.com/Best-Choice-Pr...
I assemble and demonstrate the use of the carrier with my snowblower which is why I purchased this. I have ramps for the bed of my truck but the angle of the ramps made me uncomfortable just unloading the snowblower....I'd be way to scared to have tried to load it.I know the video is long but I had read where people where having trouble understanding the instructions for assembly so I tried to be as detailed as I could. - Auta a dopravní prostředky
Thanks Mark......just what I needed to know because my carrier came minus instructions. Like Red Greene says, "If they don't find you handsome they should at least find you handy "
Thank you sir, made my job a lot easier!
Putting mine together tomorrow. I had same issue with one missing bolt. It was a different size (one of the 6 under carriage bolts.) They threw in a extra thick bolt that doesn't even go to the unit smh. Only difference on my version, is one, I didn't get any reflection stickers and second, the side gate/ramp is already hinged. The side gate/ramp is also a tad crooked. So I have to fix that issue (rubber mallet time) to make the pin holes match up so the gate/ramp can lock secure in the flat (driving) position. My paper instructions were worse than yours....smaller paper 5x7 lol. So here's a huge thx for the very detailed video you made. Awesome💯.
Same here, no reflection sticker and the gate is permanently hinged. I also have one pin lock for the up position and one pin lock for the horizontal position when traveling with no cargo.
Great video! Very cool! Thank you!
Thanks very much for the video,I've been shopping for one these for a while and this answered a lot questions I had.
Do the bolts on the bracket that slides against the hitch go up or down toward the ground. Having a hard time tightening those and making it sturdier.
great video
Nice snowblower i got the 2x cub cadet
Didn't you lay the third long bolt under the box fan?
Under the box under the fan. Maybe?
@@buddybarker1044 I haven't found it if I did
Are those r/c planes there behind you?
Yes...I was into to them years ago...another lost hobby
Could be wrong but it seems to me that you installed the Lock Plate backwards.
drop you ramp4 inch
no thanks i have a mobilty scooter and need a eltricic ramp lift