How To Reset TCM Transmission Control Module In Your Mercedes (1996-2016)
Vložit
- čas přidán 21. 05. 2020
- Hello,
In this video I will show you how to reset the transmission control module in any Mercedes from 1996 to 2016, 5 speed 722.6 and 7 speed 722.9 transmissions.
Procedure:
1- turn key on 2 clicks.
2- press gas pedal down pass kick down switch and hold for 10 seconds.
3- turn key off.
4- release gas pedal.
5- wait 2 minutes with doing anything.
Thank you and God bless. - Auta a dopravní prostředky
It was works perfectly fine for a couple days of course my transmission has the turbine speed sensor defective that is attached to the valve body that's something I have to fix thank you for your wonderful explanation and it does truly works, it does reset the transmission indeed!!
Thanks, very well explained, wish there was more like you on YT
Thank you so much. I bought a clk 200 from a grandpa here in France and it is super slow 🤣. I was told to reset the gearbox.
This little engine is perfect for making the city with a nice car. Consumption of 23mpg 👍
Thank you very much. I needed this at 6:30am here in the UK this morning. Worked first time
What was wrong with the transmission before this and how did it fix it afterwards?
Another great video man. Thank you!
Love your videos, very well explained.
My w221 s600 had a troublesome issue on transmission and was worried about spending a lot of money on repair.
Before taking it to the service center, I found this video, and the symptoms were completely resolved.
I can't thank you enough!
What type of trouble where u having? Car wouldn’t shift gears? And only go like 60
@@Astew595 In my case, It felt like it was on a high gear at low speed. The car was really slow compared to the rpm. The cause is still unknown, but there are no major problems yet after TCM reset
I think it could be your trans conductor plate I'ma change mines soon nd let u know
I have a 2010 glk350 4 mAtic I can shift it in all gears I can feel it go in the gear but it won't go it just ravs up
Wow thank you man my car was stuck on the rd and this fixed it
Great! This got the problem fixed’
Excellently explained. Thankyou so much. You saved me heaps of money. ❤️
Were you in limp mode?
Works first time at my 2018 Vito 7g , Thank You
Thank u sooo much! It worked very well for me & saved me a couple thousand!!! Again, thank you dearly!
Brother ,, my brother 😢thank you so much for this video .This saved me at least£ 2000.Don’t know how to thank to You
Did it work for u
I just did this on the way home from work. Ride feels smoother, less resistance when accelerating and I look forward to how my C320's gonna drive now (it's an 02 with 72,000 mi on it, or 116,000 km's)
Thank you so much brother. You just saved my ass like right now. I was sweating badly thinking my car gear had broke down. Thank you once again
How was your transmission acting before hand and what did this do for it?
Bro.. i normally dont comment.. BUT THANK YOU ! U are Rockstar! I subscribed as well boss.
You did good up to the part where you didn't say when to released the pedal after your first 10 seconds.
Thank you anyway for your help 🙏
I tried. It works well. Thank you
Nice video only one thing it’s base on your first 40 shifts after reset so you like to drive fast keep first 40 shift higher rpm above 2500 if not keep it below 2000 rpm for first 40 …
Thanks man it worked just fine 😃🙏again thanks.
Thx for your help ❤
Thanks for your nice video. I have to a CLK-320- 2001 😊
Many compliments. I replaced the battery and the transmission locked up. Your fix worked first time! Do you have a fix to reset the ABS/Braking system after battery replacement?
This solved my car's stuck in gear issues. Thank you
Can you elaborate more on the issue you had prior to doing this procedure???
Thank you so much for share your knowledges! :)
Tack för hjälpen
دور الساروت ٢حتا تسمع جوج كليك او تينا ١٠ تواني لما شوف الاضواء الحمر شعلو قدامك ادغط علا البنزين بالكامل حتا الاخر
Thank you this video was very detailed for a person like me. Im not sure if my 1999 Mercedes ml430 is a 5 or 7 transmission. And I laught so hard when you said no racing..damn it i live racing I only lost two races
5 speed
Thnx bro 🍻👍🏼
Thanks for explaining. Hey another question were did u get ur dash kit for the radio I can't find one😭
Haha same question here:'( it works with the wheel buttons?
Thank you 👊💪👏
Most welcome
Works well if you hold you breath too
Thanks, does it work on 2014 W463 G63 also?
Thanks!!
I’m replacing my 1994 S500 transmission. After replacing do I need to program the tcm?
👍 Nice
Thanks buddy.
Hello. we recently purchased a 2015 Adventurous TS (2014 Mercedes Sprinter 3500 Diesel chassis with automatic transmission) with 30k miles on a trip from Oregon to So. Cal and noticed driving when driving usually 65 mph+, it downshifted by itself to 4th gear. Sometimes, momentarily shifting into Neutral and back to Drive, would fix the issue. But a few times it lost the ability to accelerate and we had to pull over and idle or shut off the engine for 10-15 minutes, presumably to cool down the transmission. Then it would run normally. Also, when driving 55mph lower, we didn't see the problem. Have you seen this before? If so, any suggestions? Thanks in advance for your input.
Great video! I have a 2006 S500 with the 722.6. Would you know if I replace the transmission connector do I need to reprogram the car?
NO, YOU DO NOT NEED)))
Does this make The car shift upward?
Is sedan mode yeee!🎊🎉🎊✨
will this work on my 2005 vito van please
Thank you for sharing a good video and good info. Does it work also on Chrysler 300c srt8 5 speed NAG1
It should
2002 Ford 150 ,5,4 liter automatic transmission with over drive to reset tcm?
I wonder if this works for dodge chargers with the same 5spd transmission.
The real questions lol
Hi! I think your advice worked. I had the battery run down, and I think it messed up the tcm. When i went to put my 2006 passat 6 speed into gear, it would make a solid bang. From neutral to R or D the same. Or did it fix itself, not sure.
It didn't work at first, but after restarting the car a couple minutes later, it stopped banging into gear.
Also, all the display indicators for every gear position are now lit up, so, that may mean it is at the beginning of the factory learning curve?
Hey, as long as it goes smoothly from here out, I am good!
Thank you for the inspiration to give it a go!
Lol this has nothing to do with VW and pretty sure that trans is smoked
Would this work with a 2009 b200 cvt mercades?
Thx bro
Welcome buddy :)
What navigation screen is that model bro?
This just happened to my 2013 SL550. Got in the car, turned it on, hit reverse, and nothing happened. Tried several times. Car would not go into gear. Followed these instructions and voila, it worked. Thanks so much for this.
Hi wondering if can help was driving the other day and the car seemed to not shift up in gears as was driving it was also braking by itself when i lift foot from the accelerator the brake pedal was hard. Any ideas as to what's causing that, I have just been out in the car again today and the shifting of gears seems fine but was braking by itself again as described above. It's a mercedes c class elegance 1999 model.
I'm not sure if this applies to our cars (I own a w220 02 s55 amg) but I thought after you reset it you're supposed to go into each gear for 5 seconds and you do that twice.
I LIKED TOO MUCH THE HELP. BUT I WANT TO ASK YOU A QUESTION. THANK YOU. HELLO. MY CAR A MERCEDES W220 1999 WHEN I SPEED NORMALLY SHE STEPS FORWARD PUNCHING THE TRANSMISSION. DO YOU THINK IF I RESET IT CAN HEAL THE PROBLEM?
if it has hard shifting it may not help, check fluid level and condition first thing.
Hey Francisco....
Your accent & bastardization of the English language is worse than this guy here....trying to teach when all he speaks at home is Farsi.
My w211 won't shift gears from 2ng gear when drive and position of gear lever wont be able to change till I turn off engine. When turn in can change lever position but after sometime it stuck at D and at times at R even if the lever at P or any other position ..so whats the issue ?
Thanks for the tip, it takes 40 shifts?
Hi do you think this can work in ML w163 320? My is stuck in first gear.
I’ll try this procedure and hope that it solve the problem.
Thanks 🙏
Did it fix the issue.
Does this work on 2013 a class auto ?
My car it’s stuck in neutral in the dashboard i try the step you day but he don’t work did you have another tip
Hi
I have a problem with my Mercedes w210 e220cdi 1999 5g transmission. My engine control module was burned and I replaced. Now when I start car on dashboard not register P D N and also the transmission is stuck in one gear. If I want to replace the TCM i have to go again to diagnostic or just the same serial number it’s enought? And if I change the TCM should I also change all electrical plate from the same TCM ? Thank you
Ps: the dash board also no show speed , fuel and temperature.
What do you do. If afterwards your car want shift into higher gears/ want shift out of first gear.
They have no answers for that except Dealership. That's what Im dealing with
I've done this before on a Chrysler 300 but can't find the video.
Are you in phx? I'd like to plug an odb2 sensor into my w211, I would pay you if you could help me out . Just would like to know what I need to have fixed. I heard that auto zone can do it but I also heard their scanners might not do a complete reading
Hate to let you down, but the ICarsoft is less than $150 on eBay and then you can keep it for ever
@@GK7GARAGE thank you : ) that is true 👍
my wife says... down work on any friend's Mercedes or you will soon own their problem:
" I dont know what you did to my car, now it's shifting hard..." 🙄
in order to reset the Mercedes slk230 do you have to disconnect the battery first and then connect? before resetting?
No
I have a cuestion bro,i have a Mercedes benz c320 2003,but i'm having a problem with the gear shifter too,a friend of mine has a Mercedes benz c320 but is 2007,both are similar?
Check ✔️ the abs fuse first in the big box before anything.
Any results
How I know if it worked?
Trying to locate my seat adjustment relays not having any success can you help me out
Relay fuse three prong in fuse box area. Might have rust damage on metal areas.
When I did the key 2 clicks only loght came on was the srs light no other lights popped up. Please someone help me 04 e320 wagon
Is this reset applicable on w210 e250d 1999
Yes it works for the w210 too! from years 1996 to 2002 ou 2003 when they put it out of line...😁👌👍
Uwarka you papa be duli wida you
Will resetting mess with a tcu tune and make it worse
Where are you based please?
does it work with manual transmission?
Lmfao, of course not.... What does a manual gearbox has to learn and adapt to ? In a manual You the driver are the one who's learning and adapting and can decide when and how to shift. You can decide to start on 5th gear if you want to, you can decide to put the car on 1st gear while on a highway (don't do either of them ofc) Lol....
Smart Ass... Well Done. Cheers
Similar to the throttle relearn
Yes, just a bit different procedure
How do you reset the throttle?
how do it with mercedes 96 E320 with M104engine ? some time is delay and other times can be fast..
This doesn’t work on any Mercedes befor 97
The 722.6 was introduced in 1997. '96 has the vacuum controlled 722.4 transmission.
@@sdpupsdad So that's the reason why it changes gears for me, even though it sometimes swings and does not carry the car, but sometimes it jumps in the crystal like a lion even in the ascent. If affects ..
Hello i have 1996 Mb Ml 320 code p1570 please help me i change the all activitie module crank no start
Check for spark.Try the crank position sensor.
Hi everyone, I suffered same problem, until I a colleague recommended *Cyber_kor* on Instagram he got mine recovered for me. Check him out. He is the most reliable hand.. he is also on whatsapp +1 347 830 3644. This should help.
I tried this on my w203 it only worked for a short time then the problem came back
What fix ur Problem please help me
I wonder if you need to change your transmission fluid, turn your lights and air conditioner off when you're not driving, and check if there are any wires under your hood that are showing bare. That helps also. Carbon build up, and a dead battery?
I did this and then my car would not start. I did it with the door open. I wonder I that caused it. I jumped the car and tested the battery. All is good as of now. Battery was fine.
It doesn't work. I tried it several times. The tcm is still not computing. Can you help me?
Check out the abs fuse
Hello!! I have a 2002 MB CLK 320 - looks like the twin to this guy. My problem is the top won’t go down and my trunk is locked. The fob doesn’t work & neither does the key. Prior to this The top on this car wouldn’t go down manually because the headrests were up/ rollbar was activated. My father and I spent like four hours taking out the backseats in order to get them down and finally did it and I was very very happy. I was then able to put the top down manually....... one day I got home and my dad wasn’t there, it started to rain so I, Like a pendejaaaa tried to put it down myself and now it’s all messed up. The back of the soft top isn’t clicked in all the way so you can see a gap there & the trunk won’t open. I appreciate your videos & if you have time to read this and have any advice I’d be very grateful. Thank you 🙏🏼
Ok, first I would change the key fob battery to try unlocking the trunk, then if that doesn’t work I would crawl into the trunk and disconnect the battery and reconnect to try and reset control module and see if things will work...
@@GK7GARAGE ... or try to charge the main battery from upfront under the hood (clamp onto the same fat red cable that connects to the engine stater)
😉
Pls help! I use E350 4matic 7speed v6! 4 days ago, gears couldn't shift and the message on dashboard " maintenance required. Cant shift gear. Visit dealer" but I could move car so I invited a technician who changed the transmission oil and replaced malfunctioning auxiliary battery. But still I cant shift gear. What might the problem be???
Check your brake light switch
There is a filter I'm the transmission it has to be changed along with the oil sometimes by doing that it will work mine had a similar issue and did the oil and the filter and it worked like a Cham
Check also a switch that is there when changing the oil and replace it
I thought this was just the throttle response reset, TCM is reset via removing battery power for 10mins
Both batteries or just the main one?
@@guitarfreak2356 both i would have thought, i have only done this on a single battery merc
😊😊😊😊
Spilled Dr Pepper on my console it won’t shift out of first now. Should I try this
Did you ever get your problem fixed? Mine won’t go out of first
@@pauleady4627 tried it a couple times and it didn’t work and I haven’t got it fixed yet. ):
It might coincidentally be the conductor plate in the trans, I had the same problem, watched his video, replaced it and it works great now!
I spilled coffee on gear shift it's stuck in 1st gear will not shift out of first replaced synoloid car gear shift work fine transmission won't shift out first gear
@@hutla6053 same problem now i drive in limp mode.
Howsbouta2012buickregal
Likewise but he didn’t say it would fix limp home node
WOOD THEAT FIX COUD 1922
Hi i have an E350 2009 model, the gears keeps shifting to only 1 gear and the reverse gear. In an actual fact the gears don't change anymore it moves on 1 gear and now the mechanic told me to change the solonoid value which this is a bit costy for me, can i do the same will it work for? Please answer I'm so in a desperate mood
It very well may this exact problem
I had the same problem
Changing the battery fixed it for me
I changed my TCM out and it worked for me
I hear a noise when doin it
Will it remove limp mode
It did nothing for my car
Mine doesn’t click
Sorry to disappoint you but this procedure is not to do what you’re describingin your title.
This is adaptive learning only
This is not a reset this is a re-learn function
Well, it didn't do a darn thing to remove limp mode. In fact, the video says NOTHING about maybe recommending the person have the car inspected because the vehicle went to limp mode for a reason other than just to F with the driver and cause them frustration or panic! Something is obviously protecting the engine. Going out of limp mode made create detrimental damage to your transmission or electrical components if not diagnosed for the reason it went into limp mode in the first place. Just my opinion.
He doesn't say it's to get it out of limp mode
Hhh artificial intelligence used by Mercedes in old cars
Zu viel geradät
Obviously not for 2016 as most Mercedes don’t have a key but a push button starter so information is useless!
I HIGHLY DONT RECOMMEND NOONE DOING THIS , UNLESS YOU KNOW HOW IT MECHANICLY WORKS..DONT DO IT YOURSELF HAVE A MECHANIC DO IT.. IT DIDNT WORK FOR ME.
Still wont shift to 2nd. Tried it numerous times