Wire wrap pendant tutorial Ophelia.

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • Hello and welcome to my latest tutorial.
    To make this pendant you will need -
    • 0.8mm wire (20g) 3 x 8.5" (22cm)
    • 0.315mm weaving wire (28g) 150cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
    • Round cabochon, 10mm.
    I no longer put links to tools on here.
    The tools I use are:
    • Tronex needle nose pliers
    • Tronex short round nose pliers
    • Tronex razor flush cutters
    • Beadsmith flat nose nylon jaw pliers
    • Occasionally I use tronex bent nose pliers
    • Occasionally I use heavy-duty wire cutters
    • Occasionally I use xuron needle nose pliers
    • Bobeeze bobbins (medium size with no extra weights)
    My Etsy shop - www.etsy.com/K...
    Facebook - / kellyjjewellery
    IG - kellyjjewellery
    Thanks for watching x
    Music is free from youtube;
    Invisible Beauty - Aakask Gandhi
    And Just stay by Aakask Gandhi
    ©2023 Kelly Jones Jewellery All Rights Reserved
    Please do not copy or share this content!
    This content is created for me (Kelly Jones Jewellery) as a means to promote my tutorials.
    Do not share or reproduce this content in any format.
    Thank you!

Komentáře • 45