Gutting the Interior: 1987 Toyota Pickup 4wd
Vložit
- čas přidán 7. 09. 2024
- Hey Garage Heads! Today I'm stripping the interior of my 1987 Toyota Pickup/Hilux 4x4. This cab is rusted beyond repair and the frame has a little bit of life in it to use on another project - stay tuned!
Some other videos about this truck:
Intro, when I first brought it home: • 1987 4WD Toyota Pickup...
Starting the 22RE for the first time: • Toyota 22RE First Star...
Removing the fiberglass bed and looking the frame over: • 1987 4WD Toyota Pickup...
Here are some other Toyota videos you may find helpful:
Remove Toyota Pickup & 4Runner COMPLETE Dash: • How To Remove Toyota P...
Remove Headliner in Toyota Pickup Truck: • How to: Remove Headlin...
Remove Toyota Truck Rear Glass Window: • How to Remove Toyota T...
Remove Door Panel: • How to: Remove Toyota ...
Remove & Install B-Pillar Trim Covers: • Toyota Pickup/4Runner ...
Remove an Entire Toyota Rear Axle Assembly: • How to Remove an Entir...
Install/Upgrade to V6 1" Master Cylinder on 4 cyl Toyota: • How to Install/Upgrade...
Install Toyota Rear Axle Bearing, Oil Seal - WITHOUT a Press: • Install Toyota Pickup/...
Replace Toyota Drive Shaft Center Support Carrier Bearing: • DIY: Toyota 4x4 Drive ...
Trail Gear Hi-Steer install: • Trail Gear Hi-Steer in...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Fixing Floor and Rocker panel rust: • Fixing Floor and Rocke...
Toyota 22RE Engine Teardown: • $100 Toyota 22RE Engin...
22r Compression Test: • How to: Compression Te...
Remove Toyota 22RE Engine & Transmission: • Remove Toyota Pickup T...
Toyota Pickup/4Runner Vent Window Conversion: • How to: Toyota Pickup/...
Toyota 4x4 Transfer Case Rear Flange Oil Seal Replacement: • DIY: Toyota 4x4 Transf...
Replace Pinion Oil Seal in Rear Diff: • How to Replace Toyota ...
The Vent Window Conversion: • How to: Toyota Pickup/...
LED Headlight Conversion: • How to: Install Toyota...
Repairing Toyota Frame - Cut Out & Replace Metal: • DIY: Repairing Toyota ...
Breaking a Rusty Toyota Frame in Half: • Breaking & Cutting Up ...
Toyota Pickup Fiberglass Bed Review: • Toyota Pickup Truck Fi...
I don't have Patreon or ask for donations but you can support the channel with some rad Yota gear from my store: 6thgeargarage.c...
Follow Us:
Instagram: 6th_gear
6thGearGarage
That would be a great interior to come up on! That shit ain’t cheap!
10 years go, I was selling crack-free dashboards for $100. Little did I know...
@@6thGearGarage some guy wanted $500 for an inclinometer 😭😭 bought an electric fan instead 😂🤷🏼♂️
If you’re trying to keep one of these original it’s all heartbreak and frustration 😂
@@99fxr68 I hear ya... I still have the inclinometer from this truck stored in a box, just in case I ever need one someday. They're not getting any cheaper!
Thanks for taking the time to post up your videos! I'm getting ready to do the heater core in my 86 4Runner and these videos are great help. Then I need to do the body mounts.....argh that's gonna suck.
I don't know which sucks more... heater core or body mounts. It's a toss up! LMK which was worse after you do them both!
@@6thGearGarage I'm thinking the body mounts will take the trophy. I'm north of you in Ontario and our corrosion levels are impressive. My body bolts look like they came off the Titanic. They don't resemble bolts and nuts anymore so I'll be cutting them off somehow.
@@bradstoybox8811 Let them soak for a couple days in some PB blaster... I've gotten lucky with many crusty body mount bolts.
I love you. I have an 80, 87 dully, and recently an 84 ext. cab... I’m going to attempt a crazy build... 84 cab on the 87 1 ton dully frame with a 8x12 foot deck to build on. Great videos
I hope you can document that build! I want to see it happen
Plenty of work but fun at the same time. Love the Yota.
That’s a good way to put it👍
Disc changer behind the seat. That’s what the elect. plug and the screws siliconed were for.
Good call!!
the deck lamp switch is specific to 4runners, it is a small light in the drive side rear trim panel to illuminate the cargo area, it is not a pickup part. the inclinometer was hardwired in because it was also pillaged from a 4runner, pickups were not offered with this feature (although the 4wd tercel was).
My 85 pickup has a deck lamp and light behind the cab but it is an extra cab. Are you sure about 4runners only having the inclinometer? I’ve seen sr5 pickups with the inclinometer gauges.
I stand corrected, according to 4Crawlers write up some pickups were offered. I have never seen a 4Runner that didn’t have the plug behind the dash even if it didn’t have the meter, if yours was hard wired and not utilizing the oem harness I would still bet that it, along with the dash pad, were pulled from a 4Runner.
@@codykey9096 100% Also, I retrofitted one from a 4wd Tercel into my 1985 xtra cab. My 85 had the plug already there behind the dash that I could tap into. One of my fav mods so far!
I've yet to own one of these trucks that didn't have some wonky wiring splices. Usually alarm systems or tow harnesses, but they are never done properly IMO. Luckily I enjoy correcting and eliminating unnecessary wiring.
Same here... I've had about 10 trucks and my 1985 is the only one with an uncut harness, and I refuse to ever cut it.
This truck is savable!
Actually I’m seeing it now and a bit worse than I thought.
Yeah, it looks savable from 10 ft away. I thought so at first too, then realized it wouldn't be worth it with all that rust. Don't worry, it's going to a good cause!
I did a double plug setup to get a newer CD player to work with my tape deck. I had a small selector switch to cut the power to the tape deck, or the CD player depending on what unit was not in use at the time.
That way I could use the Toyota single units with the OEM audio head. I used to change the uber crappy OEM speakers out, but the amps were generally not terrible.
Ahhh that makes perfect since, since they upgraded to a newer radio 👍
6th Gear Garage Yea, if you were closer, and if butt and crimp connectors were not used, (I solder and heat shrink everything) it could have been me! ;-)
Sr5 dash, I have defrost button too in my xtracab sr5
Never knew they did that, thanks for the info!
my Sr5 interior looks the same
great channel
Most Xtra cab SR5 trucks in Canada have rear window defrosters in them! both of mine do!
I tend to agree that someone has swaped in a dash and some wiring from a 4runner especially if there was power windows as non of the pickups had that regardless of trim
I could use a lot of these interior parts man
I love have the Bench seat in crew cab LN65 plus same brown Interior
Ey lucky do you have that Bench seat? I'm looking for one
Angel Murcia I have blue bench don’t much interior I look for brown one
Wow I want that center consol piece, forget what they are called.
The shifter trim? It's the only one I've every had that wasn't cracked... hanging onto it ;)
Hey, so at the end of the video, you we’re talking about salvaging the carpet. Wondering if you’ve ever put one in before and they way you’d go about doing it? Future video in the making perhaps?? 🤷🏼♂️ Love the videos, keep em coming!
No I have not put one in yet. I think i used carpet would go in easier. A new carpet might take some fitting to get just right.
Ill buy the sun visors! 😃
I’m currently LS swapping my 84 4runner. I really want to keep the AC but need a way to retrofit the AC line. But it is going to be a toy for the dunes so I may just gut the dash as well. My LS heads hit the bulge in the firewall where the AC lines go through.
I hope you make some videos of it!
@@6thGearGarage going to try to! I’ve been working on it since 2018. Collecting parts and buying tools! Time is freeing up so hopefully I can get to cracking on it! Appreciate the comment back.
Reminds me of top gear.
Do you have to remove the entire sash to remove the AC condenser box?
No you do not, just removing the glovebox and the metal bracket under it should make enough room.
Do you have any of the interior stuff left?
Not much, I traded second gen parts for first gen parts.
Is that altimeter/ inclinometer for sale?
Sorry, it’s a keeper
Side mirrors for sale?
Sorry I don't have them any more
I need the seat for mine 1985 pick up🤗
A guy just came from Michigan the other day to get the seat.
@@6thGearGarage Thank you for your reply. Please let me know if you come across another one..🙏
I need the seat from it!😉
Are you in Ohio?
@@6thGearGarage no thats the only problem im in iceland . But like your channel! Good stuff!!
I didn't see if the headliner was grey, and I don't know where you're selling the parts you are parting out. I see this is a recent vid. I'm in the market for a good grey headliner!
Most of the parts go to my basement for future projects. This headliner has splits in it on the seams, like a lot of them do :(
How much for the back interior cover and the two other covers that go behind the door?
They’re already spoken for
6th Gear Garage ok thanks. I am restoring my 85 Toyota 4x4 and I wanted to put them back there. Any idea where I can find any?
I need the dash pad and gage please 😃
I’m hanging on to those 🙂
I’m also looking for a control circuit board for the a/c it’s on top of the heater box behind the glove box. Just unplug remove the clip and slide it out
What do you do with all of these parts?
I hoard most of them in my basement. I want to get a rust free truck from the south sometime and they always have sun roached interiors and plastics.
@@6thGearGarage I want the reverse my friend.... haha
@@badavis84 I still haven’t found a clean frame
Can I buy that shift knob??
Sorry, I’m keeping it. It’s the nicest one I’ve ever seen
do you want sell interior parts of this truck ?
I’m keeping most of it. I hope to find a rust free truck from the south but they usually need interior parts from all the sun/heat.
Cd changer
Ahh thank you!