Royal Enfield (Ci)gasket changing process in 5 minutes...!!
Vložit
- čas přidán 21. 09. 2017
- Iron Bacon by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Nice job.
Sounds nice to.
You make it look easy, but there were no pushrods installed when you removed the head! It's a bit more difficult if the pushrods are in, because the head won't lift off over them very easily. Still a great video, though. I'm doing the same work to my iron barrel Bullet at the moment.
Very good job
Excellent
These guys know what they are are doing👍
Ialso do like this awesome bro 👏
Thank you very much, was trying to do this and the video was an excellent help.
I'm not as fast, so just half way through. Will buy the gasket (also noticed that the tappet cover gaskets are also completely shot, will be changing that as well...
Would have been nice to have any recommendations on what kind or brand of gaskets to use... Also I'm expecting reassembly with tappet rods in place and setting up tappets could be interesting for me as an amateur...
Use Enfield genuine gasket for best results it would cost around 100 rupees
great video
Rohan Vora thanks
Good
good
Sir nice pls let me know if oil leakage show fm head minor i knew after 60km veh vibration let me know because of lead gasket i am from mumbai bullet is 350 classic
Bhai tappid rad chage this bullet m koi bhi road age pecha dallo chale ga kya
Bhai iski carburetor settimg batado best mileage k liye plz
I like sound
👍
Gasket should of been heated up cherry red, then dropped into water before fitting.
It will leak continuously if not!
That is true if you plan to reuse copper gaskets or washers. New they should seal from the package.
Hello sir mere pas eoctra mosel bodybhi mujhe usme petrol engine lgana hi k ye possible hi?
Supre
Valve ka kaam ka video daalna pls
This music name ??? Cast iron bullet rocks
Bhai packing leak ho toh plug ma b oil ajata ha
Hello bro, does gasket leak leads to pickup/power loss!!??
My CI engine is having gasket leak+loss in pick up.
yes it will.
Sir head gasket mota sahi h ya patla aap konsa use karte ho or kiu
भाई आपके पास 500 cc old modal ka half kit , head gasket aur valve mil jayega
I open all the screws but head not opening
Mine bike kick free from last five months but .. but dealer change gas kit he said after this your issue will resolve
Hi I m a new subscriber. Can u tell me the pulse valve u hv in ur bullet. Where can I get it? And I don’t have the provision to connect in my upper part of the engine. Can u help me?
You can find it in scrap market
@@Parivesh_S do u have one? If u have can u sell it to me pls?
How much it cost?
Isme point nahi hai kya ? Kaunsi model hai yeh? Point ka system pehle se nai tha ya baad me modify kar diya?
Gitartha P. Bhuyan ye Electra hai isme points nhi hote
Bro how to remove speed lock
Bhai ye cast iron h ya aluminium pla reply
Raj Put cylinder is cast iron and head is aluminium
What was the reason behind changing gasket?
Compression loss
@@Parivesh_S Thanks for your reply.
I have an issue in my vehicle that it have starting issues also spark always shows signs of lean mixture. Irrespective of carburetor tuning. I have checked vaccum leaks at the carburetor joining but I couldn't find any. Do you have any clues what could be the reason??
Try to adjust air-fuel ratio
old modal ke liye konsi rokar petti sahi he ?
Rokar petti kya hai..?
bhai ye kahaa se kharid sakte he
Piyush Patel what..?
Bhai meri bike ke silencet se oil bahar aa rha hai
Bhai bullet ke plug ma oil kyu ata ha uska solution kya ha
What did apply to the gasket?
Dantheharpman it's silicon gasket sealant..
muje Lena hai ye
Dirty work
🤪🤪🤪🤪🤪🤪😰😰😰😰😰😰
bleady back ground irretating music