IoT Fall Detection System using MPU6050, ESP32, and Blynk - Protect Your Loved Ones!
Vložit
- čas přidán 13. 09. 2024
- Falls are a serious concern, especially for the elderly and those with medical conditions. With our IoT-based fall detection system, you can receive instant notifications on your mobile phone in case of a fall, allowing you to respond quickly and potentially prevent serious injuries. In this video, we walk you through the entire process of building this system, including hardware setup, coding, and integration with the Blynk IoT platform.
Using MPU6050 and ESP32, we can detect and measure motion and orientation changes, and with Blynk, we can create a user-friendly interface to receive notifications and alert messages. We explain the hardware and software implementation in detail, including setting up the MPU6050 sensor and ESP32 microcontroller, configuring the Blynk app, and programming the system using the Arduino IDE.
This project is ideal for those who want to keep their loved ones safe and secure, or anyone who may be at risk of falls. Don't miss this opportunity to learn about the exciting world of IoT and how it can be used to enhance our lives. Be sure to like, comment, and subscribe for more exciting projects and tutorials.
#IoT #FallDetectionSystem #MPU6050 #ESP32 #Blynk #ElderlyCare #ArduinoIDE #MotionSensors #MobileNotifications #SafeLiving #DIYProjects #TechnologyForGood.
We're thrilled to announce the launch of our exclusive WhatsApp community! 🎉 Get ready for behind-the-scenes updates, exclusive content, and direct interaction with me and the amazing ImpulseTech community.
🌟 Why Join?
Instant Updates: Be the first to know about new videos, live streams, and exciting announcements.
Exclusive Content: Get access to behind-the-scenes footage, bloopers, and special content just for our WhatsApp community.
📱 How to Join:
Click this link: whatsapp.com/c....
Let's make this community a place to connect, share, and have fun together! 🤗 Can't wait to see you there!
Thank you for being the awesome ImpulseTech family that you are! 💙
Here is the link for code and circuit diagram :
github.com/Imp...
Oh, such a good idea for my mother. Thanks a lot!
I'm gonna try this.
Your welcome 🤗
@@ImpulseTech Hi again,
Everything seems to work, but I can't find the automations icon. Was it removed from the platform?
I managed to create an automation directly from the phone, but unfortunately the "is greater than" option no longer exists
@@radu.7180 You have to just scroll it i am also not able to find it for the first time when created the automation
@@ImpulseTech But I have just 4 options there (is on, is =, has changed and is any)
What type of algorithm did you for the fall detection feature?
Sir u r great....
Thanks 😊 your words mean a lot to me
Thanks a lot ❤❤
Sir while connecting with blynk it shows offline whatigbt be the issue
Which board to select while uploading the code
Select the ESP32 Dev module
Thank a lot!
Your welcome ❤️
Hi sir, im having a hackathon in 2 days where my theme is Smart home and they will be giving the problem statement will this come under that? And is there any idea or tips u can give? Or is there anyway i can contact u for help through text
You can write me at impulsetech101@gmail.com
@@ImpulseTech thank you so much
how to create new automation as there is no any icon from where we can do new automation
i also want to know if there is blynkiot rplacement
There is a separate section for Automation on the left side.
Nad Blynk is the best IoT platform
How only accelration on x axis can detect the person fall can you test this project on a person
i cant change the autonmtin type from switch to sensor hence on my automation i cant select greater thn because its a switch automation type, help please on how to change.
sir how do we use that circuit in reality that the person is falling , how is it attached to person
@@mounikamannepu8542 that we need to design it using the 3d printing and fabric
failed to find mpu6050chip ,this is the error i'm constantly getting in serial monitor .How to fix this?
Sir, can ik if this project can be done using arduino uno?
Bro its not showing port
Hi I am using arduino cloud iot instead of blynk iot please help what should I change in the code?
Can u give research paper for this please
Can you connect me over @impulsetech101@gmail.com
Sir I'm using esp32 here it doesn't connect with blynk showing offline in data what might be the issue
@@NewZone-y5c first step check that esp32 is connected to the wifi network after also check wifi has the internet access
@@ImpulseTech sir sir both are connected and are in internet access
@@NewZone-y5c can you try clicking on en button on the esp32
@@ImpulseTech sir en - reset button we have clicked and tried sir but still it ain't resolved
@@NewZone-y5c use the 2.4 ghz wifi
Error please specify your blynk template id and blynk template name please tell me sir😢
Hello I am using arduino nano esp 32 board will it work the same?
Yes 🙌
Only 5 data stream can create 😔 what will do sir 3 acceleration and 2 gyro
You need to pay for it 😞
Bro please help
Its showing error
#include
sir code is uploaded in esp32 but in Blynk iot it is still showing offline
how can this should be fixed
You need to use the 2.4 GHz of wifi and also check the wifi credentials
Sir I am using esp8266 and in the automation section I can't see greater than
I had the same problem.. you can see in the comments from above.
You have to click on automation bar, select the sensor and change type of automation from "switch" to "sensor".
But be careful because the code made by Impulse Tech is for ESP32, not for esp8266.
@@radu.7180 Ohh bruh thanks....can you forward the code even
The code for esp32 is in description
sir i need your help
MPU6050 sensor with ESP8266 data sand tingspeak code sir
i can only make 5 datastream. are u using pro plan?
No I am not using the pro version,in the free version we are only able to make 5 data stream
@@ImpulseTech then how u manage to get 6 datastream?
it is showing offline , it is urgent please connect
did you resolve the issue?
hello sir, I had a problem with the connecting part. the coding doesn't want to connect with esp32. it says here the selected port or board does not exist. What do you think I should do sir??
What board u r using
@monishkrishnan7620 i use esp32 board
. Variables and constants in RAM (global, static), used 31820 / 80192 bytes (39%)
║ SEGMENT BYTES DESCRIPTION
╠══ DATA 1576 initialized variables
╠══ RODATA 2932 constants
╚══ BSS 27312 zeroed variables
. Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 62759 / 65536 bytes (95%)
║ SEGMENT BYTES DESCRIPTION
╠══ ICACHE 32768 reserved space for flash instruction cache
╚══ IRAM 29991 code in IRAM
. Code in flash (default, ICACHE_FLASH_ATTR), used 264604 / 1048576 bytes (25%)
║ SEGMENT BYTES DESCRIPTION
╚══ IROM 264604 code in flash
Good evening sir, I am facing this issue why compiling the code, could please guide how to fix this, try as soon as possible.
U can upload the code it will work
In file included from C:\Users\KIIT\AppData\Local\Temp\.arduinoIDE-unsaved2024022-10904-7kp1k5.532rm\sketch_jan22a\sketch_jan22a.ino:7:
c:\Users\KIIT\Documents\Arduino\libraries\Blynk\src/BlynkSimpleEsp32.h:15:2: error: #error This code is intended to run on the ESP32 platform! Please check your Tools->Board setting.
15 | #error This code is intended to run on the ESP32 platform! Please check your Tools->Board setting.
| ^~~~~
exit status 1
Compilation error: exit status 1
I'm faceing this issue
please help
You need to select the right board and port before uploading the code