UNBOXING the DYNOJET WBCX - wideband - for PV3 for the Honda Grom wb-pv16-1
Vložit
- čas přidán 25. 08. 2024
- #dynojet #grom
70% OF MY VIEWERS ARE NOT SUBSCRIBED TO MY CHANNEL. PLEASE CONSIDER HITTING THE SUBSCRIBE BUTTON. THANK YOU.
If you have any questions about motorcycle tuning You can reach out to us through the BLR TUNING Facebook page.
/ blrtuning
here is the firmware update link and the notes that dynojet sent me.
www.dynojet.com...
In C3 open the tune and at the very bottom of the treeview you will see Tunelab. This is where you set the Target AFR for your correction
This module will retail for $349.99 from dynojet. This will allow you to use wideband with your tune on the pv3 ECU flash tuning device from dynojet. after you install a firmware update to your PV with the new wideband device or wbcx installed you will be able to monitor your air to fuel ratio directly from the gauge display on the PV3.. this means no more closed-loop section that you have a hard time controlling on the Honda Grom.
You can purchase the wbcx here from dynojet...
cart.dynojet.c...
Follow me here.
on Facebook,
Bill Ramseyer Jr
/ biggdaddy007br
Twitter
/ billramseyerjr
Instagram / snapchat
@BIGGDADDY007BR
CZcams
m.czcams.com/users/u...
Xbox-1
HONDA250XATV
Bill, you have all the DynoJet products already. I assume removing all from your bike is simply to show folks can do with less and get similar results. Be sure to explain the limitations of using all vs. just PV3 and the new WBCX. As always, thanks for your reviews.
Awesome Bill!!!
I assume if you already have a WB2 sensor this will leverage that - correct? Your not installing another bung into you exhaust for this to work.
How do you change the map on PV3 for different octane levels? I plan on getting the wbcx as well.
You can't just make a change so it runs on different fuel what I did is tuned the bike on different fuel.. so I literally put different fuel in the bike and then tuned it was that fuel... I built my own map for each type of fuel...