I just bought a C332 and will have it delivered in about 4 days. Much different than my 20+ year New Holland L190! Looking forward to receiving it and your video is very informative!
@@wildcatwilly the drive control is quirky…really too quick. I like the snail 🐌 mode but have been looking in the settings to slow it down. Great skid steer!!!
Nice piece of equipment. The snail mode is awesome. How far up on snail mode does the percentage go to. Example will it control it from 10%-80%. Is the cab on your c327 heated and air conditioned?
I don't know if I can run this, my right leg is prosthetic below the knee. So the accelerator pedal may be a problem, or could I just t un it with the accelerator knob??
I rarely use the accelerator pedal... I don't know if you have a JCB dealer close to you but they make a fantastic side-entry machine. I am partial to New Holland but in your case it may be much nicer.
On the right joystick there is a button with a bucket with an arrow pointing down push the joystick forward then click that button and it will go into float mode
I have heard a lot of people complain about the visibility. I personally have never understood what they are talking about it has always had excellent visibility for me. I do forestry mulching equipment moving and general dirt work with it.
It really depends on what dealer is close to you??? I have a phenomenal New Holland dealer an hour away. Kubota's I think are struggling to match the flow output of all the competitors... My father purchased a 2007 JCB mini excavator that has been in the shop for 3 months. Multiple issues finding Parts in England. Having them shipped over clearing customs. It has not been a fun ride. I really love the JCB teleskid and the side entry. I have had a rough time getting parts. I don't think this will be the case once supply and demand finally catches back up. After we finally get through the current situation.
One other quick thing. If you're only moving dirt. The creep mode is not necessary but if you are going to be moving pallets it's worth its weight in gold.
The JCB Teleskid 2TS-7T is the one I was looking at. Dealer 30 minutes away. Having said that the NH dealer is also 30 minutes away in the opposite direction
@@wildcatwilly I'm happy for you. My last 2 were junk. I don't see many of them being sold around here in Minnesota. When a guy that I know used to work at a dealer tells me that the new stuff barely ran good enough to get out the door. That makes me think. Plus that dealer is really pushing Kubota now. I know they were losing alot of customers.
I just bought a C332 and will have it delivered in about 4 days. Much different than my 20+ year New Holland L190! Looking forward to receiving it and your video is very informative!
Thanks for watching. Let me know if I can help.
@@wildcatwilly the drive control is quirky…really too quick. I like the snail 🐌 mode but have been looking in the settings to slow it down. Great skid steer!!!
Just got a L328, Was a very informative video. What I was looking for was information on
attaching and detaching implements. Also love the snail mode.
Thanks for commenting. Thanks for watching.
EXCELLENT VIDEO!! very few of such around. You really took your time explaining everything. Thank You!!!
Thanks!
Nice skid steer look forward to seeing more videos with it working
Thanks for watching working on one tomorrow
It the best machine I ran so far very satisfied 👍👍
Glad to hear that!
Nice video. Well explained thank-you sir!
Nice piece of equipment. The snail mode is awesome. How far up on snail mode does the percentage go to. Example will it control it from 10%-80%. Is the cab on your c327 heated and air conditioned?
It is heated and air conditioned. I'm not sure on the snail mode.
Snail mode goes from 1-100
Just installed a polycarbonate door on my C332, having shattered the glass.
I would love to do that what did it cost?
I don't know if I can run this, my right leg is prosthetic below the knee. So the accelerator pedal may be a problem, or could I just t un it with the accelerator knob??
I rarely use the accelerator pedal... I don't know if you have a JCB dealer close to you but they make a fantastic side-entry machine. I am partial to New Holland but in your case it may be much nicer.
Are you able to lower the bucket and level it at the same time?
Yes
@@wildcatwilly interesting... we can't get ours to do that... if you are lowering, you have to stop to move the bucket
I think your speed sensitivity is too low
How do you put a skid loader in “float mode”. Boss told me it was good mode to throw on when snow plowing.
On the right joystick there is a button with a bucket with an arrow pointing down push the joystick forward then click that button and it will go into float mode
How is leg room and visibility to right corner of bucket with the position of wiper motor?
I have heard a lot of people complain about the visibility. I personally have never understood what they are talking about it has always had excellent visibility for me. I do forestry mulching equipment moving and general dirt work with it.
@@wildcatwilly visibility is zero problem with my C332.
Trying to decide between this, kubota or JCB… going a little crazy
It really depends on what dealer is close to you??? I have a phenomenal New Holland dealer an hour away. Kubota's I think are struggling to match the flow output of all the competitors... My father purchased a 2007 JCB mini excavator that has been in the shop for 3 months. Multiple issues finding Parts in England. Having them shipped over clearing customs. It has not been a fun ride. I really love the JCB teleskid and the side entry. I have had a rough time getting parts. I don't think this will be the case once supply and demand finally catches back up. After we finally get through the current situation.
One other quick thing. If you're only moving dirt. The creep mode is not necessary but if you are going to be moving pallets it's worth its weight in gold.
The JCB Teleskid 2TS-7T is the one I was looking at. Dealer 30 minutes away. Having said that the NH dealer is also 30 minutes away in the opposite direction
What are you planning to do with it? If you're getting into mulching you want as much oil pushed as possible.
@@wildcatwilly mostly farm work and the occasional side job
Hey what does a machine like this cost?
You would have to ask your dealer it varies.
Mine cost $70K. But they gave me $19K trade in on my old one.
Thanks
Says the man operating a hickory highlift.
Where's the parking brake?
Right side column. If I remember correctly.
@@wildcatwilly right paddle.
Nice while it runs. Which isn't long
What do you mean?
@@wildcatwilly built to cheap
I use them awfully hard with no issue.
@@wildcatwilly I'm happy for you. My last 2 were junk. I don't see many of them being sold around here in Minnesota. When a guy that I know used to work at a dealer tells me that the new stuff barely ran good enough to get out the door. That makes me think. Plus that dealer is really pushing Kubota now. I know they were losing alot of customers.
Very interesting I'm surprised we have had 4 of them. Other than maintenance no issues to speak of.