Flow Coating
Vložit
- čas přidán 20. 11. 2018
- Flow Coating
RAW footage of work done by The Gunman.
This is my 2nd Channel, see below links to my pages
Main CZcams Channel
/ mrzoeystevenson
Gunman's World
/ @gunmansworld4314
Website
thegunman.net.au/
Main Facebook page
pages/The-Gu...
Instagram
/ the__gunman
Follow me on Twitter through this link
/ gunmanthe
Flickr
www.flickr.com/photos/1323439...
Tumblr
www.tumblr.com/blog/the-gun-man
Vine
vine.co/u/1196001495557058560
Gunman RAW on FaceBook
/ thegunmanraw - Auta a dopravní prostředky
Gorgeous finish. I can binge watch these videos, thanks for taking all your time to make these videos and sharing with us all. 😁
Nice work Gunny, those bonnets looks great!.. Thanks for all you help. I've painted my first hood and fender set.
Another awesome job. Man your clear coats look awesome. Never get tired of watching your videos , can't wait to get to a few small jobs I have but I'm definitely following the things you say work well
You are slightly crazy but brilliant too when it comes to painting- always informative thanks for the upload
I bought a Tekna Pro Lite after watching many of your videos , cost was a bit of a hard hit but very worth it in the end . Keep these great videos coming !
LIKING THE RANDOM RAMBLINGS OF GUNNER EPIC AS ALWAYS
nice job mate as always, what causes silicone in the paint job usually happens in clear is that sometimes oil and water combined from compressor gets trough the filter if the filter is not been replaced for some time that's why now heaps of people prefer screw type compressor
Thank you for another awesome video Gunny. Would you be able to do a short video on your touch up sticks, how to use them and results of using them
Thanks again. Dan (in UK)
Looking awesome mate !!!!!!
Subed this channel to, really nice job mate.
Totally get where you're coming from Gunny- I'm nearly at the end of a very intensive custom bike job and dusted off the GTI Pro Lite Nebula with the T110 cap and wondered why I'd been dicking about with a Sata and Sagola for the clearcoats- that thing totally smashed the clear on like glass. Interesting that the Lotus Edition and Dv1 are back in the box- you're so fickle, lol! I envy your flash-off times, 'cos we're down to single figures during the daytime in the UK, but not drinking for 18 months? Man, you're missing a trick- get out there and DRINK some shit!!
Thanks for the great video as always! What do you use for a belt fresh air filter for your respirator?
What size tip do you use for high solids clear in your pro lite? I have a tekna copper which I love I use 1.3 for high solids clear. But I've heard of guys using 1.2 with great results. I was wandering if you have ever experminted with a 1.2. Thanks for all the great videos your the man.
I dawn all cars that come into the shop. Had a few miserable jobs like that just covered in slime. Dawn in a foam gun works pretty well. My shop is already dirty enough. Definitely a test in patience.
Hey Gunny! Great video as always :) I notice when you are wiping panels down with prepsol, you look to be using a tack cloth. Is this the case or are they just solvent wipes? If they are tack cloths, do you not find the tacky coating is left as residue on the panel when using solvent?
After 100 hours of Gunny videos this is how I do it in my garage. Rip it down with 500 on DA with interface pad then 600 sometimes 800. Base spot repair with ANI r150 or r160 1.0 cap. Then SMASH on 3 coats clear with Pro-Lite T110!
Denib sand 1500, 2000, 3000 cut buff polish wax!
Nice video gunny as usual. Yeah, it's hard to beat a Pro Lite for clear ain't it. LOL. I'm using my new Sata Jet 5000 RP at the moment with the 1.2 setup. Does a great job but still go back to my Vigilante from time to time. Still looking forward to using the DV1 in a little bit when it comes in. Paint some shit! Cheers
I miss work so bad, id love to get my own little booth going
Dear sir, in behalf of all your subscribers, it would be more beneficial for rookies like us, to learn the steps before flow coating. How you 600 grit sanded. To be exact. Thank you very much for adding this much needed step. Otherwise, You're just showing off your clear coating abilities. And we don't learn from that, quite frankly. Tyvm.
Go back about 7-8 years ago and catch up then🤡
What’s the rpm settings on the orbital when you are sanding for flow coating?
Hi Gunny from the UK, I have been using my pair of GTI -W since I bought them new in 2001, I have just bought a pair of Pro lites, what setup are you using? I have ordered 1.3 with TE20 air caps
😎👍
Quick question. How do you keep your wax and grease remover spray bottle pump o ring from wearing out from the chemical. The pump o ring? I have wax and grease remover in the same looking sprayer and can’t get it to pump after 2 weeks of chemical being in it. Thanks a million
Hello. What kind of varnish do you use? and whether it is suitable for the garage
If u spray cheap clear coat for flows coat and how hong u have to wate for flow coat
OLD I mean really old painters wash with a water solution which is a dash of dish soap after prep sole seems to work
When you flow coat are you using 10-12 inches away from the panel instead of the 5/6 inches. It looks like the overlap is about 75% Thanks for the grear information. Rick D.
Hi what is the set up on the gti pro light for clear thanks
it is not easy to watch or listen to these vidios because i can't understand the audio
You got a gift brother. FUCKING NICE!
What clear do you use? What temp you paint? I use finish 1 720 but always get orange peel
Why do you add base over the cut throughs? Will you see them under the clear?
Do you not find flow coating effects the colour?
Do you have the link for the respirator you use? Is it still working correctly? I'm wanting to get something better than my full face 3m cartridge respirator that is a good value.
can i know how much psi you use for that clearcoat?
What chemicals are you using before you hit Hadner?
Also had a silicone issue at our shop one week, turned out it was a contaminated batch of gun thinners for cleaning.
Had that one before too. Some solvent recycling companies get inks from printers and they have lots of oil in it so can contaminate. So many things it can be, hard to pinpoint sometimes
Show show. Brasil
What are you spraying
Why are you back to your GTI ProLite? What happened to the Lotus?
👍
What are those razor blade things called you use for cutting a plastic I've been trying to find them forever can't figure out what they're called
Go to SprayGunsDirect.co.uk and search for colad blade or just colad and search through all their products. Alternatively I have a link in all my recent videos on my main channel
@@TheGunmanRAW thanks alot man. Love ur videos. Watch them all the time. I love painting and in between jobs ill watch ur videos and feels like I'm there painting with u. Kinda of relaxing to watch lol.
What are you spraying from the gun with 599 on the cup
Clear base coat blender.
How do you get away with flow coating the next day without reactions mate? Thought u had to wait a good few days? ✌️
I think he is able to do it because he bakes it. There might be a more experienced painter that can answer that better but that would be my guess.
Depending on the type of clear you use you can wait 16-18 hours
I thought you'd only get a reaction if you used basecoat , from the reducer being to aggressive
Do you ever steam clean cars, thanks
When refilling your PPS cup if you leave the lid attached to your gun you'll be out and hang it up as usual. a little less cumbersome
Yeah I always forget that lol.
The Gunman RAW can you but the quick release fir the pro lite
I have more difficulty leaving the lid on the gun. I take the whole system off the gun too. Maybe I’ll have to try this again.
Get this finish outside of an oven.
Master craftsman you are but camera man you ain’t 🤨
Lol sorry, I think my newer videos are better, not that I've gotten better just the stability technology
👏👏👏👏👏👍🏾👍🏾👍🏾👍👍👍
Good for you , dumping the alcohol. ....it's gotta be the worst., me myself I personally hate it, I lost my father and both my uncle's (his brothers) early due to alcoholism, I never did really enjoy drinking, don't get me wrong though in my early 20s I drank like a fish!!! But now 20yrs later just the thought of it makes my skin cringe!! My bad habit was popping pills I kid you not I used to eat about 20/30 norcos a day along with 4/6 oxycotin (40mg) ,then at bed time to fall asleep I would eat another 6 somas, how I never overdosed is beyond me, but having 2 kids that need you and watching $100k get drained out of your bank account in less 2 years is motivation to kick the habit!!....it's been almost 2 yrs now since I've took any type of pain peel and honestly I feel great.......don't get me wrong I have my bad days just like everyone else but I also have a cannibus club literally 2 blocks away so I do get by just fine........keep on keeping on! And don't think about that bottle and you'll be just fine!!!...the stars will align perfectly in your favor! !!