Honda H'ness CB350 - OE Meter Visor Installation- Crowning Her Highness 👑
Vložit
- čas přidán 27. 12. 2022
- #hondacb350 #hondahnesscb350 #bikemaintenance
Just a fast forward clip of OE Meter Visor installation for the Honda Highness CB350.
Part cost: 1945/-
Tools required:
10mm small socket spanner
6mm Allen Key
5mm Allen Key
4mm Allen Key
Installed @RajkaGarage - Auta a dopravní prostředky
Totally agree on the design aspect, truly rock solid design. Been using it for 4K+ kms, travelled at all speeds and terrains. There are no signs of vibrations or rattles.
Does it offer any functional advantages other than just enhancing the looks? For example, does it reduce the amount of rain water and dust getting in the area around the meter?
I'm guessing the wind blast reduction or aerodynamic effect would be minimal if not totally non-existant.
@@chnacr2 Its majorly a cosmetic accessory. It may protect console from dust, rain spills and stones that get thrown from bigger vehicles.
True that 🤘
@@chnacr2 only for look. Even the big one also utter waste. We feel heavy windblast on our face.
As soon as saw visor at booking i got one for myself . Pair of bar end mirrors and visor looks very good
Ramram bhau
Its very rare on youtube to see the use of toptools. The quality of tech is equal to the quality of tools. Subscribed and best luck.
Ramram 🙏.
These tools are from my previous business.. not many know that I had my own ventures(multi car service center) 12-13 years back and prior to that had worked with brands like Honda, Yamaha and Maruti Suzuki on the service side. 😊
@@RajkaGarage mazyakade pan cb 350 ahe one month old. DIY cha khup weda ahe mi. Tumche sarva video mi pahato. Rx, max, kB restore hobby mhanun kelya ahet. Shakya asel tar no dya tumcha.
Superb
Hi Raj, great video. A voiceover over with instructions would have been even greater
Thanks buddy 😊.
I have another video with instructions when I had installed it in my bike 7-8 months back..but i found that the process is too complex for DIY job hence never published that..so this time when fitting on my cousin's bike, just thought of sharing a motion picture in FF mode.
👍❤️
Can we remove front number plate mount
Hi ,Correct my if I am wrong the back plannel of the headlights is of shining grey. Its a after market or company fitted product.
Thats the original dome itself buddy...it's shining coz of the PPF done on that part aswell along with the bike.
The installation of the small support is not shown properly. You have just shown after installing those at 2:54.
Can you just tell what is the purpose of two holes in that support? Is there any screw nut arrangement or that holes take support from something behind?
Hello, I am a new CB350 RS owner from Pune. I wanted to check what would be your recommendation for rear view mirrors? The stock ones aren’t very useful.
Sir Firstly Thanks for Video. Your videos are always informative.
Where you brought this Official OE part, bcz at my place in showroom its cost is 3400 for complete set. Have you brought it from Honda Bigwing showroom or Outside?
Thanks buddy 😊
This is the OE Meter Visor which is available in Bigwing service center. Cost of Visor is 1980 + they charge around 300-400 for installation as it's a complex job.
Sir i am also from pune i have booked RS before one month back still dealer is not confirming when i will get the bike. Pleas suggest if i can go for meteor instead of RS.
Buddy both bikes have their pros and cons but I would suggest wait for the RS. Meteor is also a good bike, but Honda is anytime better in all aspects especially the RS which has a different appeal altogether.
Sir can you please check and let me know if the cb300r mirrors can be fitted to highness directly ? If not how do I get it done? I have seen cb350rs fitted with the 300r mirror directly online. Thanks 🙏
They are a direct fit on the H'ness..the thread size is similar to H'ness.
@@RajkaGarage 🙏🙏 will check with the bigwing guys in Andheri
Does this visor reduce wind blast at high speeds?as this is the main concern while riding on highways as it is classic bike wind blast is so much felt in this
@raj bhai, what’s your recommendation on replacement rear tyre for highness? Normal road usage.
Thanks in advance.
There are only few options in this size, MRF and Ralco in the medium cost range and Metzeler. Metzeler is hard to find and costs 7k+.
Hi Raj... I have recently bought a CB 350..
Is it possible to install a electronic AHO switch in hiness.. or headlight on off switch... Which one will be a better option...
Hi Dingata, congratulations mate!
Regarding AHO, i don't think there is any plug and play options in the market like the RE as the stock sockets of H'ness are very different.(Japanese standards).
And altering the socket will void warranty. Same goes for adding a On/Off switch..it can certainly be done but will tampering with the OE sockets.
nice one Raj bhai !!...btw it looks almost identical to the carbon racing one. This one is available with the service centres?
Thanks brother 😄..
Yes this is available at the service center. Costs 1980. The price is mostly due to the bracket design which is very sturdy, unlike the spoke type assembly of the aftermarket ones.
Also due to design the service center charges around 300-400 rs for the fitting.
Please suggest that how can I remove the mark of scratches from silencer of Honda Highness CB350 motorcycle.
What kind of scratches are these? Is it due to some fall or something paint left over.. if uts due to some fall or anything object that has come in contact making these scratches..then no solution will work..if it's some paint or other stains then it can be removed using WD40 when the exhaust is cold.
@@RajkaGarage Thanks for suggestion.
Raj sir mera Honda livo bike he usko bhi laga sakte he our kharchay kitna ayega
Bitha sakte hai..2.5L kharcha ayega..pehle gadi badalna padegaa 😂
@@RajkaGarage 😂😂😂
😜
Hi Raj ,
Can himalayan bs4 visor can be fitted on highness ?
Yes it can be.. there are some aftermarket options available with the Himalayan design for the CB.