How to Install VAISHNU Touring Headlight on Honda H'ness CB 350 | Step by Step Process | DIY |
Vložit
- čas přidán 7. 09. 2024
- We at VAISHNU Auto Lighting Solutions are as Excited as you Guys to further share the Complete Step by Step Tutorial on How to Install our Newly Launched Touring Headlight Setup for your Honda H'ness & CB 350 RS.
Kindly Follow all the Procedures as mentioned in the Video to Install the Headlight without any Hassles.
You can reach out to us at our Customer Support No 9871301846 in case of anymore assistance required or for any Clarifications regarding the Installation.
The Link to Purchasing the Product is below:
vaishnu.com/he...
Greetings! We are Glad to share after receiving many requests for having a DRL on the Headlight, we have now introduced 2 DRL Models as well. You can check out on our website www.vaishnu.com.
Does this product effect the warranty?
@@ronitganguly1694 Greetings! It keeps the warranty intact as its a plug and play Replacement with proper Installation.
Sorry for asking this question again. In my state, RTO and police suddenly became super active nowadays and levying fines left, right and centre. They put fines for anything extra on the bike, especially switches. My question would be, is it possible to provide a “special edition’ without the switch? I don’t mind burning up couple of LEDs , rather than getting into hussle with the authorities. Please reply.
@@shannonforarker5792 Possible to do if you order only the white headlight version.
@@vaishnuautolightingsolutions That would be fantastic 👍. I just need white with DRL. Thank you so much .
Could you please tell me the total number of pins in the stock headlight coupler, & what is it called?
You have not mentioned about the drl, is it all time ON or we have to switch between again on pressing Switch button or ? As you ON the ignition did not see any white or warm bright on the floor , except those indicators orange shade. Kindly share some light on this
Greetings! The DRL stays on throughout whenever you turn on ignition. It does not turn off until you switch off your bike and remove the key.
The stock pass switch can be used for high beam and low beam ?
The stock headlights lit with ignition key on. Can we switch off this Vaishnu headlight so that it won't lit with ignition key ?
Greetings! Stock pass switch works the same way as it is functioning in stock setup. It is only used for High beam passing as default setting in your motorcycle, Our lights will have no change in the setup. Lights can be turned on/ off using our switch. Hence, light on/ off is controlled by our switch, not the ignition key. However, once ignition is on only then lights can be powered on with our switch.
@@vaishnuautolightingsolutions In stock set up we weren't getting on off switch for the AHO norm resulting in battery drainage. If we can off the light by ur system that's a great advantage Plus the performance of the powerful light. Thanks for your reply.
It has heat sink means LEDs are going to heat up more than stock led setup how hea tis dissipated withing the enclosed headlight domb which is almost sealed .
Greetings! Sir all LED Headlights have heatsinks, small/ Big but they all have. Even your stock Headlight has it. The Heatsink is slightly bigger in our case which effectively cools the Headlight. Also, the dome is not completely sealed, it has air ventilation from the 2 holes at the back side for proper air ventilation and active cooling.
can this be installed on the rs too, would appreciate links to videos where the rs350 also has this headlight installed
Greetings! Yes its compatible with both Honda H’ness and RS. We don’t have videos available, but it has been tested and fitted on RS as well.
In the DRL version, will it be on even if we keep the switch off? If not is there a possibility to use the light without the on/off switch?
Greetings! DRL’s stay on throughout whenever you turn on your bike’s ignition.
Only the Main Headlight can be turned off/ on with the switch provided.
@@vaishnuautolightingsolutionsThank you so much for the quick answer.
Hi Team,
Is there a way to adjust the beam. I just installed mine yesterday and the beam doesnt look anything like this video
Greetings! Yes sir, the beam can be adjusted. Plz connect with our customer support team, we will guide you how to do it.
@@vaishnuautolightingsolutions Thanks, will reach out
@@user-xn1ky2le2lhi! How is the light performing?
@@sujaydmahore1817 Performance is great. However, the old version doesn't have a locking mechanism. Which leads to the beam adjustment not sticking after a couple of humps.
I believe they have rectified this issue in the latest model
Passing light work with drls varient… give demonstration fr how passing light work
Greetings! Passing light does not work when the Headlight is off in DRL or without DRL model as per the Original Design of the Stock Headlight.
Is there is any option to adjust the light pointing
Greetings! Yes there are 2 methods to adjust the height of the light throw. One is external which adjusts the Outer shell of the headlight itself. Second, We have provided an internal mechanism to adjust the height of the light throw. You can get in touch with our customer support team if you need more information.
6:24 , why there is ring formation of light ?
Why the light doesn’t spread out?
Greetings! Its not a ring formation, The beam pattern is such as it is crisp and dedicated to the area it is supposed to light up without little spillage elsewhere and this is what makes no glare for oncoming traffic as well.
@@vaishnuautolightingsolutions Can we just plug and play light unit without using other wiring connection (one under the tank) without connecting switch given by you if I want just high beam and low beam?
@@shodhannv Greetings! Its not possible, it will adversely affect your Motorcycles electrical system.
@@vaishnuautolightingsolutions can you please post a comparison video of stock light vs Vaishnu light in the night for cb350 ?
Nice video
Details for bike handel
Will this light fit HONDA CB350 (2024) ?
@@MrAnwarmashudGreetings! We have developed a suitable model for the CB 350 (2024) version. It will be launched in a Week’s time. Kindly stay tuned!
No need for any Ac to Dc wiring change?
Greetings!
Wiring is already in DC from factory settings. No changes required.
Hi when the headlight is off, PASS will work? If yes, which Colour?
Greetings! Pass does not work when main headlight is off.
@@vaishnuautolightingsolutions thanks
What is the lumens for this light? It is not mentioned on the website.
Greetings! Raw lumens is not a true reflection of how strong and good these lights are.. its the effective lumens that make these lights terrific for night riding. We have not mentioned as these figures can be deceiving for customers comparing with other products like auxiliary lights. It’ll be like comparing apples with lemons, hence we haven’t listed the lumens of these lights. But these are 2 x brighter than your stock led Setup, if you are interested to know how bright these are. For any further clarification please feel free to connect with our customer support team.
Its support any kind of 7 inch led headlight setup ?
How to install handle guard in hness ...plzz upload video
Could you please put up a video regarding the installation touring headlight setup for the continental gt 650? Step-by-Step Process.
Greetings! We are releasing an installation video for Royal Enfield motorcycles in a couple of days. You can check that out.
Have you installed these on gt? How is the performance,
The headlight is covered in glass or the top visor is of plastic
Greetings! Its made of Glass.
DRL is a requirement in BS6 onwards, so if i install this, lights would be switched off until swtich is engaged or is there a DRL that is there?
Greetings! DRL is not mandatory for BS6 vehicles, rather having AHO (Automatic Headlight On) is mandatory. RTO wants all vehicles to have some sort of lights on at all times to enhance their safety even during day time. Some manufacturers provide DRL, some provide your Headlights to be on at all times.
Even with our headlights we are providing a switch for headlight which you can turn on during day time for your own safety and to follow BS6 norms. You can keep it off too in case of an emergency.
Following the rule is a choice now like it is with all the other Laws on road eg. wearing a helmet or not.
Do you have any coupon code for any discount or offers as current price is high to consider this investment..
Greetings!
We have launched a DRL version as well. You can check out on our website.
Without harness can we fit it in cb 350?
Greetings! The Headlight is designed to work with the harness only. The harness also performs to save your motorcycle electrical system, so shouldn’t even think about skipping it for the Motorcycles Safety.
@@vaishnuautolightingsolutions thanks 👍.... Is it legal?
Will this hamper bike's performance or battery ?
Greetings! The power consumption of the Headlight is almost similar to your stock headlight. It is in no way going to affect performance negatively, the only positive is that it provides you brightness many times more than stock headlights.
Pls tell how u make stock rim into black color?
Is it possible to upload installation video for classic reborn
Greetings! We have it in the pipeline, will be released in future.
Need plug and play for honda CB350 no need switches and extra wires headache.
Greetings! You may not need it but your motorcycle needs it, else it will damage the electrical system of the motorcycle and costing you in thousands in damages.
Focus on what is good for your motorcycle and listen to the manufacturers who know what they are manufacturing for your motorcycle.
@@vaishnuautolightingsolutions thank you so much for your support and concern 😊 I'll order soon
Any headlight available for Honda Unicorn bs6?
I want to buy for interceptor
But no DIY video on your CZcams channel!
Can you upload please?
Greetings! You can order from our website. DIY video will be uploaded this weekend.
Hey brother, did you install these on inty? How is the performance
@@shailesh5349 Greetings! You can check out our instagram page, we have lots of user review posts about the performance of these headlights.
When ignition is turned on whether the headlight turn on automatically? If not it's not legal as per government
Greetings! We have a switch along with our harness, if you keep the switch on the lights turn on immediately ignition is turned on. If the switch is off, the lights stay off.
BS6 norms suggest to have your headlights on at all times, even during daytime.
So now with our setup, it is totally in your hands to keep the headlight on at all times and obey the law.
@@vaishnuautolightingsolutions how can we buy it in Bangalore? Whats the cost of light + harness?
@@mukundshenoy3142 Sir! The product is exclusively available through our website only at the moment. You can order online, sharing link below.
vaishnu.com/product/led-touring-headlight-for-honda-hness-cb-350-rs-motorcycles-plug-play-3-in-1-color-mode-1-year-warranty/
Please upload video for Royal Enfield classic reborn
Informative video....
Does it fit in an yezdi adventure?
Greetings! We have a compatible model for Yezdi adventure listed on our website www.vaishnu.com
Hello team Vishnu ,do we need to toggle through 3 colours every time for the required colour of headlight??
Greetings! The default color is Pure White. So, if you wish to operate any other color you will have to toggle through the cycle everytime you turn the motorcycle off and then on again.
@@vaishnuautolightingsolutions .
So we can't change the default colour to our preference then ?!!
@@karthikeyaa.p3698 No! That is not possible. Since its just 3 color cycles, its not that big of a task as well that it causes inconvenience from our experience and all customers who are currently using as well.
@@vaishnuautolightingsolutions ty so much!!
Sir just a small doubt, installing these touring headlights which are really really good void your company electrical warranty terms in any way
Greetings! The headlight replacement is a plug and play fitment and doesn’t cut or splice any original wiring of your motorcycle. Hence, it doesn’t void the warranty.
@@vaishnuautolightingsolutions thank you sir, will get in contact with you for the purchase soon cause I desperately want to change my headlight for travelling
Stock light jaisa key ON karte hi headlight ON hota he kya ?
Ya button se ON karna padega ?
Greetings! Headlight can be turned on/ off using the switch we have provided. The switch will only be functional once you turn on ignition.
Were are you place details clear please
@@goldenrock3669 Greetings! You can find all our details on our website www.vaishnu.com
Could you pleaes specify the lumens for this light, As different states imposes different laws on how bright the light can be.
Greetings! No state has the mechanism to test lumens of on road running Lights atleast in India. Kerala has started lux meters for testing, but in that context also the stock headlight of H’ness is 2 x brighter than Standard Halogen lamps, still its road legal. Our Headlights are 2 x brighter than stock headlight of H’ness. Just to give you some rough estimate.
@@vaishnuautolightingsolutions Could you specify the lumens please?
@@jojugeorge3215 Its around 5000 Lumens
Bro light matiyarnno?
Can it be fix in CB 350 DLX Pro
Greetings! Yes it is compatible with New CB 350 DLX Pro model as well.
wireing link
Will it work on RS?
Greetings! Yes sir, it is compatible for H’ness and RS both.
make for apache 4v
Will it not attract Warranty issues
Greetings! Its a plug and play setup, it keeps your warranty intact.
@@vaishnuautolightingsolutions How can I get it at my pin code 712123 and best price
Hi. It will not cancell warranty?
Greetings! Its a direct plug and play fitment, it doesn’t void warranty.
❤
Price?
Greetings!
vaishnu.com/product/led-touring-headlight-for-honda-hness-cb-350-rs-motorcycles-plug-play-3-in-1-color-mode-1-year-warranty/
Follow the link for more details
Hello, What is the headlamp size??
Price bro
Is it legal?
Greetings!
It follows the guidelines by RTO however formal approval is pending.
Price
Greetings! Kindly follow our link in the description for pricing and other information.
Plz tell whether this would void warranty?
@@rahulbasu4978 greetings! Its a plug and play setup which doesn’t involve any cutting/ splicing of wires during installation. This process keeps the warranty intact.
@@vaishnuautolightingsolutions thanks for the response