SUPERCHARGED F-150 GETS BELTECH 3/5.5 DROP KIT (15-20) + REVIEW
Vložit
- čas přidán 14. 11. 2020
- Thanks for checking out my channel. If you want to help support you can buy merch at the link below!
Check out my online store: ec0beastcustoms.com
Instagram: @ec0beast
Please remember to like, comment, and subscribe! Thank you! #Beltech #F150 - Auta a dopravní prostředky
Looks really good. The install looks pretty simply.
Looks great, Bell Tech has always been my favorite lowering kit.
Thank you!!
Wow!! I can’t wait to see what wheel and tire combination you go with! 😍 welcome back from Vegas!
Thanks bro 🤘
@@ec0beast of course!!
@@ec0beast yoooo you know we used to ride bikes together at The skate park and we rode w dalton and his brother
@@ec0beast you gave me a orange Gatorade once after a sesh cuz I didn’t have money to go to cvs lmao
Good stuff. My boy on a come up
Thanks bro 🤞
I have a 2022 F150 I just got the three and a half 5 and 1/2 drop kit from belltech. Low and fast😊👍🇨🇦
I've been looking at one of these style trucks from a similar dealer... Is there any option you would of added? Great videos btw I really enjoy you building it as you go. Thank for the video.
Sounds good
I love it. I am 53 and love every single thing on your truck. Does the valance drag speed bumps? I’m going to order my next truck and it will be similar. I am going to get a coupe short bed. I do want a four wheel drive this time because I have finally quit racing ( what I told my wife) and doing more fishing. 5.0 should be sufficient for me. I don’t think I will have to add anything to it. 😏
The splitter does scrape on steep driveways and I haven’t tried but I’m 100% sure it will scrape on a speed bump 😂 I hope you get the truck bro they’re so much fun🤘
I lowered my 2010 single cab too, thing was nasty. The sub frame would get caught on speed bumps at Walmart and make a terrible thud sound for everyone to Break their necks to 😂
Any vibration issues , I’m getting the same kit for my 23 .. nice truck BTW
Lookin good
Thank you!!
Hey man did you get the spindles?
Supp bro, great video. Did you get around to removing the speed limiter?
Thank you for watching! I won’t be doing it until my warranty gets a little closer to the end
looking forward to it afterwards
Thank you so much🤘
Nice...
Nice truck! got same set up with 22s and nitto 420s, hooks up pretty good! Do you get transmission squeal under light to moderate acceleration during shifts?!?!
Thank you! And I haven’t had any transmission issues yet🤘
Lucky... need to get husky or oem rear wheel well liners... makes all the difference back there looks so much better! Just did mine today! If you have a email I can send a picture of my truck so you can see what me wheel and tire looks like with same drop kit you have...
What % are your tints on the sides? Thanks
I’m sure you’re prob wanting to keep your warranty but I have a cai exhaust and ended up getting the oz tune and boy it changed the whole truck. It was absolutely what it needed. Shifts over 7k, better throttle response and at least 40 to the wheels on e85. If you get over your mile mark or want to see the biggest difference get the oz tune we’ll worth the money. Love the truck man, like seeing the progress.
Thanks for the info bro and thanks for the support!! I do want to keep my warranty for now but something like that is DEFINITELY coming in the future 🤘
Does this kit fits 2021 model?
i got the same kit on my 2020 f150 rcsb and its slightly cambered in the front why is that?
Put some wheel spacers on it.
How much did installation cost
Doesn't effect ride quality. Uses the same springs front and back.
How much they charge you bro ?
I have a 2017 F150 2wd, short bed, standard cab, V6, with factory 245 70R 17 wheels. I would like to use larger wheels/tires. Will this kit work, and what size wheels/tires are needed? Thanks.
I have a 2016 f150 and I was wondering the same thing... I want to lower it but I have 245/70/r17 tires. Apparently I see that it is the same in the video...
Methanol kit next.
Man I love your truck
I have the same truck 2016
But I need to kick my own self cause I didn’t get the big engine inn it
I drop it all so 3 5 belltech If you care to check it out and share more Ideas
Would love to talk with you
Beautiful truck you have
Thank you! Hit me up on Instagram to chat more 🤞 @ec0beast
Where’s the e46 content 😪😪 you think you could give us a full run down of the car like engine mounts transmission mounts etc.. even if you don’t know can you still show us?
E46 content is making a come back in 2021! I have my roll cage and I’ll installing it eventually and when the cars torn down I was thinking of doing a quick build breakdown and shi🤞
ec0beast I would love that man cause I wanna swap my e46 too 😂I’m tired of that little in-line 6 & I just need ideas 🤦🏽♂️
Did you get your headlights adjusted?
When I did mine it was way off.
I am using the same kit, but in my case, my car seems to be a bit lower in front than the back. What can I do to fix this issue? I followed all the instructions, but the car from the rear bit lifted.
Did you install the drop hangers , if you did that’s why ..
Did you have any vibration problems? I have same kit on my 2024 and it vibrates a lot when i get to highway speed 65MPH +
I was about to ask, i have a 21 and want to get this kit too
How did you get rid of the front camber?
You have to elongate the slots in the lower control arm pockets (frame) inward like 3/4". It sucks the front wheels in around 1/2", which is a good thing on a 10" wheel with +30 offset.
When’s the debadge coming
I was kind of thinking about it but when you take the front badges out it leaves ugly holes 🤮
17 skinny and 15's rear. Cause race truck.
I got the same belltech lowering kit. Get the 2" drop spindles bro trust me
Ride quality is way better
Looking at them on American trucks right now. It’s m 2” lower with them also?
@@ec0beast it will give you like another 1" lower if that makes sense. Not necessarily another 2 inch drop on top of the drop your putting on already.
@@ec0beast czcams.com/video/YfFOi94ZnVQ/video.html check out what my truck looks like after everything I did
@@mikemorales0824 thanks for the info bro, & your truck is dope 🤘
@@ec0beast tell your sponsor Belltech to send them over PRONTO 😁
How many miles does the lifted eco boost have
I just remembered you sold it ☹️
It's says 3/5.5. But looks more like 2/4. Not bad mouthing just wondering cause I want mine to sit like that and wanted to know for sure
It’s a 3/5 100%
@@ec0beast thanks man thats what I'm wanting. Did it come with new bump stops
Yessir!
Slap on a hydro brake & angle kit, call it a drift truck
Did you have to get the driveshaft shortened?
Nope!
Join the regular cab group on Facebook
Honest review or you just saying that because they sponsored you with a kit?
Honesty review bro 🤘
What noticeable differences do you feel or see??
5:25 that reflection kinna thicc doe
Lmfao🤣🤣
Wow so hot! 🥵
I would have 5/7 dropped it.
Scrap that drop. Re-do..
Looks like a 2/4
Hi pinky
Hi :)
Soooo mexy
Drop it for real. 5/7 works on 4wd.
You started the video with “yo yo yo.” That immediately means I can’t subscribe.
Still got your ad revenue 😇👍
@@ec0beast touché
Still with that cringe yo yo yo
Definitely not a builder anyone can buy shit and say it’s good you don’t know anything
You’re right bro
the intro is so cringe