TC88 Series: 21 How to install Harley rocker boxes & gaskets. BONUS: How to bleed down lifters
Vložit
- čas přidán 5. 03. 2016
- How to install Harley Davidson rocker shafts and boxes. I will also demonstrate how to bleed down lifters in this video. This is from the Twin Cam Engine Series. Learn how to disassemble and assemble your engine. Full of tips not found in service manuals.
Join this channel to get access to perks:
/ @how2wrench
Thank you for watching. Please subscribe and share my work!
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621...
Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
Tool Links:
www.amazon.com/shop/shaneconl...
If I can ever be of service to you, here is a video explains how to connect with me.
• How to get connected w...
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Shirt/Stickers link: how2wrench.com/product-catego...
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
/ shaneconleyhow2wrench
Instagram:
/ how2wrench
Linkedin:
/ shane-conley-how2wrench
Facebook:
/ how2wrench
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
"Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt - Auta a dopravní prostředky
whoever made this video is not only a good teacher, but a good person
Thank you for the comment. Very Kind.
I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
This video is excellent. Thank you very much for taking the time to put it together! I'm rebuilding my TC 88 as well.
I hope these kids realize how lucky they are to have an instructor like this. This guy has high standards and knows what he is talking about. Most importantly he teaches without talking down to any of these kids and is enthusiastic about it. You can also tell that they like this guy.
Keep up the videos and the good work.
2 things...1. Thank you for subbing...2. Its so ironic you say this because the first comment I wake up to read this am is someone saying I'm the worst teacher ever and just treat the students like slaves...which mind you althought I brush it off, its never fun to deal with. And then I get yours...Thank you for being a good human and an asset to the community...
We love comments from people like you! 👍 Thank you for taking the time to comment! It helps us!
Did you know there are over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel:
Channel Search: czcams.com/video/oAeXz1nd-eQ/video.html
All Playlists: czcams.com/users/conleybuiltplaylists
Please say thanks and “high five us here: www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
@@How2Wrench Your videos were the only thing that got me through my TC 88 to a 107 build. Took notes and wrote my own step by step manual. Thanks again.
@@toddoverby5538 There a few ways you could help keep this work going and stay connected with me personally.
1. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
2. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Great video....nice to see someone that not only has the knowledge and understands this stuff but knows how to teach and relay the information in a informative non-confrontational way.......Great Job......I purchased new lifters for my RK and Im going to install them. I PUMPED THEM UP ....put them in a container of oil and said...."I'LL BE BACK"...
Glad to help...👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
I could sit in his class all day and learn a lot. He sounds genuinely nice and wants his students to learn the proper way to do the job, and not just pump out billable hours.
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
thank you Shane for your knowledge & sharing. you make it possible to own a Harley & have the confidence to work on my bike.
Thanks for the great video! I'm changing out my polished rocker boxes for chrome. This video was so helpful.
Just assembled my manifold and carburetor this evening. Followed your instructions and it worked perfectly!
Thank you Scott! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
You are an awesome instructor! Sounds funny but your enthusiastic about what your talking about and make me want to watch more!
Best instruction on Harley motor on the web. Nice work Mr. Conley.
You are a good mechanic and teacher Shane, you explain this all very well.
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
This was so helpful. I plan to change my own cams and leave solid push rods. Your videos have helped me with so many projects
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
SHANE! You are an awesome teacher! Thanks for sharing your knowledge with all of us!
Thank you Joe!
You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research.
Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Live Chat is great for you to actually show your specific issue!
Donation link: www.paypal.me/how2wrench
@@How2Wrench might have to subscribe myself! thx!
This vid was exactly what I've been searching for the past couple days! just purchased a full camchest kit from fueling with lifters and pushrods and wanted to understand the top end a bit more, thanks for the breakdown! Awesome instructors here
Much success on the install. Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
This guy is a true mechanic. He knows that you don't just slap shit together. He adds to the job to make it right. What the book does not outline. The book does not outline good mechanical practices. Those come from experience and common sense.Love seeing the inside of a stock Harley. Haven't seen it in a long time.
Thanks for commenting and adding value to our community!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I can really appreciate the way you stress attention to detail. That seems to be lacking in so many people today.
I think Shane's middle name might be "attention" lol.... Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Shared! You do a great job explaining the little things the book doesn’t mention.
Thank you for sharing my work! If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
Want to say thank you? www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
You are an amazing teacher, thanks for sharing this dude!!
Thanks so much for these videos man. I’m on my 2nd bike at my job for reassembling the rocker boxes. We’re a custom bike shop so sometimes people wanna powdercoat the engines black, this is part of the process lol. But the videos are super informative and helped me get the job done right and at a good pace. So keep it up brother👍🏻
Thank you for commenting. Could you spare $2 and support us with even more benefits? Smash the subscribe button and bell! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Thank you for your knowledge. Some us can't afford school or even labor on these jobs. Thank you again. I have a 92 evo engine In about to tear into to see where the knocking on rear cylinder is coming from.
Thanks Shane for sharing your knowledge . it's much appreciate .
Thank you so much for all the great information 🤙 you helped me do a big job, saved me a little over $300.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
We have a LIVE Q&A starting soon and will use comments from videos to try and answer too. Got a question you need answered sooner than our LIVE Q&A Shows are on? Here’s how to get your answer for free! czcams.com/video/oAeXz1nd-eQ/video.html (and other free tools and products!)
Get my cell number here: how2wrench.com/product/personal-tech-training-phone-facetime/
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thank you Shane. These are really helpful videos. Much appreciated.
Great video! - Thanks for your teachings! 🇺🇸
Just a big thank you for this one..., want to powder coat my boxes over the winter months and this is a real help.
D.
You're welcome Dean!
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
great video, I dont know how many times I watched this. I know on my 103" I want to remove the rocker boxes to get them powder coated to get rid of that chrome, way cheaper than buying it from harley
Thanks for commenting and adding value to our community!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I love all your videos, especially twin cams:)
Glad you like them! Have you seen all the playlists just for Twin Cams? Members can request too!
Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Excellent video thank you!!!
Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
czcams.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Great video Shane. Exactly what I needed. I had to take apart my front head only (on a 88ci 2005 softail standard) Both the pushrods were black. Should that be a concern that the intake is not silver? Someone must have done work on this before?
At the beginning of the video lets say you cannot look into the cylinder through the spark plug hole to confirm, is it possible that both push rods can be even on the overlap stroke? I know they would be even on the base circle, and that's where you want to be. Or is it not possible to to have both pushrods/lifters even if they are not on the base circle.
Thanks for upload this learn so much from this channel great teacher, take away my fear about HD motor more understanding how it work👍👍👍👌
Thanks for watching! We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
@@How2Wrench where and when is the next live session ? how can I join in this
@@shahnawazvlog6266 The next date has not been scheduled yet for September as it fell on a holiday weekend. Thinking mid-end of month. Here is the join link and choices: Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Informative videos you do. Thanks
Thanks for watching! We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
I have an 07 kaw 1600 meanstreak that uses hydraulic lash adjusters. the rocker case must be removed to get to the head gasket but will not be serviced. Is it still necessary to bleed the lash adjusters when reinstalling the rocker case? Thanks.
Thanks for this helpful video.
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Well done 👍🏻
What is the torque specs for the 4 bolts on the rocker arms. it was never stated in the video. Thanks.
Great Job.
Thank you Amigo. My '05 R.K. is in the shop for the second time in 2 weeks. First, new 42mm Mikuni... Nice! Second, excessive oil out of breather...
Obviously too much pressure. I checked the new oil level & just fine.
Mechanic estimates $500. for the job. Ouch.
Your video educated me in as much that at 10 y.o., the "sponges" are probably crap.
Any feedback will be appreciated and confidential.
Have a great day & thanx alot. BTW, 18,200MI. on engine ...?
You're very welcome and in luck. I provide one on one help. Contact me here: how2wrench.com/contact/Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Have you Subscribed yet to never miss a video? Have you seen the video playlists czcams.com/users/conleybuiltplaylists ?
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Hi Shane i read about Top dead Center and Base Circle, what is the difference and what is the best way, I don't understand why my service manual does not mention anything about bleeding lifter ?
while you wait in the lifters to bleed down, does it affect the effectiveness of the loctite?
Sweet video, thank you!
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
please help i did the bleeding process with to bush rods and its not completely bleeding down....am i missing a step
Excellent teacher. TY
Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Make sense? Love it 😀
It does! 😎
Thanks for subbing!
High 5 us with a donation: www.paypal.me/how2wrench
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Can you adjust the rocker housing and or the rocker support arm if your pushrods rub against the top of the pushrod tube? Rear cylinder on a 14 RK CVO 110...... Front cylinder pushrods are centered and the rear cylinder pushrod are off towards the rear of the tube.
Awesome content thank you 👍
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Does this video also apply to 96ci & 103ci as well..what I mean is..have there been any significant changes?? Great video by the way!!
Great teacher
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Is this the same for a 2001 harley softail?
I am going to be doing rocker box gasket on my 103. Why do we need the piston TDC when torquing down the top rocker box cover bolts? Thanks
Hello friend! Have you Subscribed yet to never miss a video? Have you seen the video playlists czcams.com/users/conleybuiltplaylists ?
Still have questions? Coach Conley provides tech help and works one on one! His CZcams and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance!
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
I'm new to the world of HD but I'm astonished that there are no locator dowels on these components . Also , a valuable opportunity was missed to fit or at least explain what Rocker Lockers do .
Hi Bob....I was a Japanese/Metric tech (and still am...I like them all...😊) for 5 years prior to discovering the world of HD...Over the last 20 years wrenching on HD I am at many times thinking the same thing! I was turned on to Rocker Lockers about two years ago (from my boss at Suzuki America because he road a FXR every day to work...LOL) and think they sound amazing, but I haven't had a chance to try. Have you? I can't believe all the options now! Here's a link in case others are interested: amzn.to/2ZOn62I
We sure love you taking the time to comment. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
@@How2Wrench I'll be be fitting some to my 04 Roadster before next summer . I've got a video on here and you can hear the rockers tapping away .
Thanks for taking the time to make these videos, it's extremely helpful.
I've a silly question though, when we're bolting down the rocker arm assembly on a dry motor drained of oil, do you still need to wait for it to "bleed" to get that bit of free play? Probably not right? Because if there's no oil there's no pressure?
Also what do we do when one of the rocker arms wiggle's but the other is stiff? Should we turn the motor or just wait longer? Thanks again for all the tips
Shane is actually in Africa training techs and has limited wifi...He said quickly you must bleed it down!
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
how many miles the head last in a sportsteer 883 , 1998 to 2005 and those are easier to fix>??
Quick question. I have a 09 nightster xl1200n and have been running a mooneyes filter with a drag specialties breather tube to atmospheric. I once read that these motors need that bit of breather oil to return back into the motor. Everything else I've seen and read says no, it's bad for the tops of the piston. Noticed you mentioned the oil returning as well. So does it need that bit of oil to return? Amazing video. Thank you for any insight.
This is a great question for Shane directly!
You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine.
He replies to members EVERY day first thing before grabbing his wrenches in the shop! Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Did you know How 2 Wrench has a techline service? You can get Shane 1:1 on video chat! how2wrench.com/ols/products/techline-one-on-one
Great Shane, mine is 2017 SG, is breather housing using rubber gasket or metal gasket, thanks for your answer shane
Hi Harman, we grabbed Shane quick since it was a quick question and he mentioned he is not exactly sure on a 2017 specific model. He mentioned that HD will even change parts or versions and sometimes go back to an original design that worked better. And let's not forget dealers trying to turn over old inventory...🤔
Thanks! Smash the sub and like please. Glad it helped!
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Ohh , That bleed down is where I fucked up last time... I was wondering why it was so damn tight, I had enough sense to stop but this video is perfect ty!
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
What brand torque wrench is that. I feel like the calibration is off on the one I bought
very nice
Thank you! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Thank you ✋️
We also love sharing comments like this with Shane. Tip jar links are below for support!
Thanks for sharing and the added value to our wrenching community. Keep them coming.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "CZcams Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
hi shane my name is shane too, I just reokaced the rear head on my 2005 Harley lowrider. 88inch injected motor, my problem is it seems like I'm not getting enough compression in that cyl. when I remove the plug and put my finger over it the comp. is low. took the rocker box off and tried it and the compression seemed good. there is a lot of air blowing up through the push rod area. can you help me? there was nothing wrong with the motor before I replaced the head. replaced the head only because I had an exhaust bolt break off and couldn't remove it so put another head on. so the bike ran great before the replaced head , am I missing something?
shane bumenstein
You're in luck. I do offer personal service to back up what's missing from a video to fix your specific problem. Live Chat is great for you to actually show your specific issue! Become a member of my website. It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline! Sign up now to have my personal cell phone number on speed dial!
As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of our learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
Contact form: how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Donation link: www.paypal.me/how2wrench
Quick question. The four bolts that go in to the rocker arm housing, are they all 4 the same length? I have run into 2 longer / 2 shorter by about 1/8-3/16". Is that right? If so can you tell me which goes where? My manual doesn't say anything about it?? Thanks!!
+Scott Kirk
First: Too many models and bikes in this world for me to memorize!.:) use a parts fiche to verify correct parts
Second: a Harley parts book at your local dealer will tell this correct length bolt for the correct part number
Third: NEVER trust the last mechanic. They may have went to the local hardware store and replaced lost bolts!
Fourth: Thank you and please share.
+Shane Conley Thanks Shane! Great Video by the way I've been chasing TDC all day day and uyour video helped me right away. But I am having an impossible time getting the piston to TDC to reinstall the covers. I'm going crazy. Any advice on that? I figured out the bolt size issue. BTW, for some reason the bike I bought has 1 adjustable pushrod on the front cylinder which is coincidentally the one giving me problems. Any helpful advice? I have a manual but it's not helping me on this.
Shane, I have adjustable pushrods. After I install the rocker lockers on the bench, do I have to re-adjust my pushrods?
Hi friend. Shane gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work.
Want faster response times? Join link below.
Thank you for commenting. Want more benefits?
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
I watched this just to see the gasket install for the rocker box. My 2015 road King, the rear cylinder is leaking and the dealership was offering to change both for $400.I think this not a hard job, most difficult is remove tractor seat and fuel tank. Thanks
I have a 2001 FXDWG supposedly with cams and big bore kit 95 CI. I’d been researching the crankcase rebreather and done a mod catch can since my Harley pukes a lot on highway speed and not nearly as much as when its just around the neighborhood ride. I know it may be the plastic part valve/ or screen that may need to be change. I have 2 questions and I would like to thank you in advance for any answer and am willing to contribute $ for your work on this channel.
1st question. Will recycling this puked oil back to the engine through lets say a vent hole through the oil cap or anywhere else help with the problem?
2nd question..I am considering changing the cam oil plate with hydraulic tensioner to SE ,, will that help with the oil issue? Ty sir
Good news bud. Shane has a techline just for that! Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
just wondering- do i need to blue loctite the rocker box bolts? thanks for your excellent videos
I don't recall from memory my friend. I would need to look it up in a manual. Give us a high five or join the channel and I can look it up! Thank you for the kind words too....Shane
Thank you for commenting. Want more? Smash the sub button! Here are the links to support us for this information and our work saving you money.
Join this channel to get access to perks: (Free tool giveaways and member-only videos)
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Give us a high 5 here: www.paypal.me/how2wrench
Is there any chance of replacing the rocker covers without removing the motor from the frame? Just looking to take an evo to a knucklehead.
Dem Wallet yes, but you’ll have to remove your gas tank
you guys do memberships/tutorials on how to wrench? love it
Hi Isaac. Glad it helped. We do have memberships and it comes loaded with extras! Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Hi I just replaced my front and rear rocker box cover gaskets and they still seep out oil I used the James Genuine Gasket. The front cylinder seeps out from the left front bolt on the left side of the bike closest to the front tire. As for the rear cylinder oil seeps out from the left rear bolt on the left side of the bike closest to the rear tire. Do you know what I should do? Thanks
Hope this message makes sense to you as a decent human being that also works for a living and gets it. I’m the intern studying under Shane and on the social media team.. He's in the shop working or training a class. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! He does an AM and PM check in to answer all member questions. Consider joining...best $1.99 you'll spend this month 😁
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Shane does try answer some non members questions when he get's some time so hang tight if joining is not an option for you.
One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough...
If you need help sooner choose or more personal his 1:1 option is below! Here’s the copy text:
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! A deep dive one-on-one with him is an option. Use video, email and phone support.
Through the one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
That's a patient man lol....
i am having a crazy amount of oil leak from my air filter on my tc88 engine from the air cleaner, i wonder if that grey plastic valve or worn piston rings or a dirty air filter is the culprit?
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
cmdeane it’s the blow by getting spit out threw the breather bolts on the air filter assembly. It’s a common issue. Google or CZcams Harley blow by issue or Harley catch can
Me too
Ok how long did it take to bleed them down? Plus you let pushrod intake open then close (down). Did you spin motor one more revolution or just the second the intake closed
Yo! We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your CZcams handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
When assembling the rockers would it be a good time to install Rocker Lockers?
Yes! I was just introduced to them. Love the idea. Have you seen all the options? Here's a link for others as I'm guessing you already did it. amzn.to/2WMJOX3
We sure love you taking the time to comment. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Want to help us back? Please subscribe and give us a high 5 here: www.paypal.me/how2wrench
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Are all of the rocker plate bolts the same length on both sides
I'm the intern studying under Shane. He's on the road training techs and not here to ask this week. I fInally made it to your comment going down the list...just an FYI...he literally logs in and answers member questions daily! Consider joining...best $1.99 you'll spend this month 😁
One of these days I hope to move from the office to the shop! Wish I knew the answer but don't want to bs you. He couldn't screen these requests fast enough...
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
So what happens if I didn’t let the fluid bleed down? If the valve touches the position?
We grabbed Shane quick and he said that could be a bad day and a bent valve. Do leakdown test. (we have videos and a member benefit is we can send you the videos you need to a task so you don't have to search)
That's a good question for Shane directly.
You reached the social media team here. We get 300-400 requests a week, so it’s a bit time challenging as you can imagine.
Shane does try to answer some non-members' questions when he gets some time so hang tight if you’re not in a hurry.
Did you know one of the member benefits is to ask for which videos would work for your needs and get daily "quicks answers" to questions directly from Shane?. Best $1.99 a month you'd spend...of course enjoy the over 700 free videos and access the the member only vids with all the other benefits listed below.
There are two immediate options that can get you a solution within 24 hours and quite often within the day.
Option 1:
Consider joining...best $1.99 you'll spend this month 😁 This is great for quick answers.
He literally logs in and answers member questions daily! He does an AM and PM check-in to answer all member questions. Join this channel to get access to the perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Option 2:
If you need help sooner choose his 1:1 option! What you get is a deep dive one-on-one with him. Use video, email, and phone support. He will drop his tools and work with you directly!
Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I am very sorry, I accidently hit the thumbs down icon twice... I didn't mean to... I plead temporary insanity. This is an excellent video... I added three thumbs up to make up for my stupidity.
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Muito bom a especificação de montagem, a gente sempre aprendendo obrigado irmão
Excellent video. Question, semi related. My buddy with a 13' Roadglide is getting excessive oil in his air cleaner. This leads me to believe that possibly something not right with the breather assembly, filter, gasket, etc. Thoughts? Again, excellent video, very good content. Subscribed
Thank you Ben!! Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Could just be too much oil ... is he checking oil levels according to manual
:)
I had same issue, running my oil level to high and riding hard = over flow into air filter as the higher RPM’s cause oil level to rise. Adjusted oil level and fixed over flow.
good
You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research.
Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Live Chat is great for you to actually show your specific issue!
Donation link: www.paypal.me/how2wrench
Should there be blue loctite on rocker bolt?
Hi Frank...some techs choose to use loctite at times the manual doesnt call for it. In the case I've demonstrated just as HD has laid out in the factory service procedures.
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Subscribe and Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
@13:15 what is that last gasket called?
Rocker Box Cover. But often called gasket on the packaging. Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Shane you have no idea, how much i re watch these videos. I am the guy who posted a vid on your fb. I installed the rocker breathers incorrectly.dipstick was blowing out the tank. Anyway, i have to end rocker noise.they say it's fine, but I'm thinking about doing rocker lockers and shims. I want to know if you recommend using those. I wishi had an extra motor just to rebuild it. It's like i have an addiction with it. You have any suggestions on finding use motors on the cheap?
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Timing 6:22, why let the air go back to the engine but not out to the atmosphere? Isn't the air is carbon monoxide?
Hey Shane, is the the same procedure as the 103 engine?
We reached out to Shane and he said very close but he'd have to compare manuals to say for sure and he just always has the main manual in front of him. He did say he built his 107" (which was a 103 flywheel) using all the same procedures....
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
whats your take on JIMS 120 motor?
Other than super badass? Never heard of anything out of the norm as far as issues BUT have never had one long toerm myself. I also can't help but love the quality of anything I've ever touched with their name engraved on it that I may be biased!
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
When i set the rocker box back on with new gasket. Should the rocker box cover sit perfectly flush all around the head? or is it normal to for it to sit up little less the 1/4" inch before torqing bolts? thanks for any help
The cover on a Twin Cam should sit flat. A 1/4 " sounds like a mile! Feel free to email me a pic just so we are on the same page.
Thank you for the kind words and sharing my work. If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Whats your email shane addy Shane? I got cover to sit down,but i can slide a piece of paper into the 1 corner. I will send pic thanks so much
Shane Conley your vids. Make me glad i watched. I have a front rocker box leak frontand back. Got a new gasket. Should i replace gasket under the box too?
Shane Conley amazing vids. The way you explain about the tension of the box. When take off,and where to set the piston. Seems like i have a noisy front rocker box. Plus it's leaking out the cover. I heard of a sleeve they sell to quiet down rockers. Bike still performs the same,great. But noise makes me worry.. They sell sleeves that the rocker bolts go thru. Does that sound right?
how many miles does this bike/motor have ?
We bought as salvage.
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
When doing torque specs and it says 18 to 22 do you go 18 or 19 or closer to 22 ????
Hi friend. Running down today’s list of comments! I try to answer when I've seen it before, but I don't recognize this one. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work.
Want faster response times? Join link below.
Thank you for commenting. Want more benefits?
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
I just caught him and he said he does 18 first then 22 final! Now I know too!
Why does a " rocker locker " kit have o-rings in It ?
I'm the intern studying under Shane. I'm going to watch this video right now and learn what he said as to why! One of these days I hope to move from the office to the shop!
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
have oil in air breather of a 1999 80 inch h.d
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
So installing new lifters would not need bled down?
chippyloudog You may have to from assembly lube or "tested" lifters. It's been awhile since I've put new ones in. You ALWAYS must verify the pushrod will rotate.
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Thx Shane your videos and responses are great
Feel free to share my work with others on your social networks....:)
Forgot to mention 'O' ring on rocker support
Where is the disassembly video?
Hi Tim,
Here is the entire playlist for Twin Cam. I have other HD playlists as well. Would you please give a donation to support the free videos on here. Thank you for coming to the channel!
Twin Cam Link: czcams.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
👍🏽
👍 Thank you for taking the time to comment! Hit that subscribe button if you haven’t please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
"Do ya see how they could grab a couple a threads"....."ya strip em " ...."okay" ...s'wisconsin
:) Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
I don’t understand why Harley doesn’t use dowel , lineup guide pins on any the mating parts of the engine . I wanna say That’s why the top ends become noisy.
Sorry, but I had to chuckle at "larger diameter fastener" when describing the bigger bolt.
😉
I just bought a 1987 Electra glide an I hear loud tick mechanic told me the evo engine is loud an it has a high rpm cam so it’s normal it’s really loud tic an guy is a hack an never fixed anything else on my bike correct down to the kick stand sad just scared to ride the dam thing
Bummer on the tic...From tech calls we've heard Shane answer, on his service hotline, it's not a one shot fix and there are good solid diagnostic steps to take before tearing into...We are just the Social media team though. 😬 That's a great question for Shane but dang is he busy with the shop, member channel and techline...may be a hot minute to catch him.
Good news Shane has a member club where he does answer questions daily! Here is the link to connect directly with him! * Join here: czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Why would the valve hit the piston? I think you are wrong there.
That surely is a question for Shane. Can you hit the subscribe button, it helps us and he often responds to subscribers when he gets to a computer. You rock!
For faster service see below:
We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner.
Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432
Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench
Thank you in advance for giving back! He looks forward to working with you directly!
no K.I.S.S. here
just three questions :; why do harley engines spend all their time in bits? Are they unreliable? Why do you need to fit aftermarket engine parts? is the engineering not upto the Asian markets?
all 3 of my harleys engines have never come apart so id say you are painting with a pretty broad brush.Who says we need to fit aftermarket parts?As far as cruisers go i would say harley is among the best.Its a cruiser and thats what its good at.Please dont tell me your busa will blow it off of the road because it should.
Why should you have to line up the parts to make it cosmetically appealing, Oh yeah lazy Harley-Davidson engineers .
you could make your own dowel. Just drill a small hole under the box then weld a stud into the cover.