MicroATX is really interesting in my opinion. Thanks to onboard audio, LAN and even WiFi one simply doesn't need so many PCI slots anymore. As soon as there is enough space for a proper GPU and a decent CPU cooler, I'm interested. This case also caught my sight on the web. Glad to see you checked it out en detail!
MATX motherboards are always cheaper, too. One issue I've been running into is with the proliferation of 2.5 and 3 slot GPUs depending on the board size and PCIE slot positions sometimes you wont even get the one extra slot you might need for an addon card.
Yes, it is more or less the same, with slightly different front panel connectivity and missing the VGA support bracket. I'm not sold with the looks of the front panel on the Matrexx 40 though.
What case would you take for more bucks with the same formfactor/minimalist design but maybe better quality of construction, materials...? Are there options? I can't find it here where I live
@@FelipePeixoto1991 guys is this case good for an i7 2600 watercooled with a gammax l120 v2 , with an aorus rx 570, i will buy fans too but it will be fine right?
Three questions: 1. First time I'm seeing somebody who uses tape to put thermal paste. I like it! What type of tape did you use? 2. How were you able to estimate the size of the square of your thermal paste that would be right size for the cpu? 3. Does the tempered glass side have provisions for thumb screws at the back so it would be locked in? Thanks in advance
Like the 3.5 inch drive bay. Can have one 3.5 inch drive and space on top of it for cable excess. No need for more than 1 3.5 inch drive with a ssd boot drive and scratch ssd drive on the MB. Can store all long time storage on DAS or NAS. Agree-front air panel would be a great addition.
Good review! You allude to a smaller case, but this would make the installation of 280mm top and front difficult or impossible, which you say is already tight, you cannot have it both ways. If you want a small case the CoolerMaster Q300 is there but good luck with 280mm AIO installation there . Looks a pretty decent case, the odd chassis front holes is probably due to the base chassis being used in multiple cases.
True, but I would be prepared to sacrifice top AIO installation for a smaller chassis and better front airflow. Don't get me wrong, I like the Macube 110 but feel that micro-ATX chassis of this size are a little pointless when you can get mid-tower cases that support ATX motherboards and are almost the same dimensions.
Another great video and a fine looking finished build, but I hope you don't mind if I ask you a question. Why did you remove the heatsink from the MP600 and use the much smaller one supplied with the motherboard? Was it just for aesthetics or cpu cooler clearance? You're not the first CZcamsr I've seen do this which surprises me as the supplied heatsink works well (at least in my build) and, I think, looks pretty good too.
I removed the MP600 heat sink simply for aesthetic reasons. If the system was being used daily, I would probably stick with the stock Corsair heat sink. Glad you enjoyed the review.
I currently have a nzxt h210 which I'm thinking of replacing as I can't fit any of the new GPU's in it. They're either too thick or too long to fit with the 240 AIO I use. this is a case I'd not seen yet and seems to be not too much bigger (really trying to stay SFF'ish). I can't do the NR200/Dancase style boxes as they're too small for everything I need. If they'd push this price up by half again or even doubled it and added some more basic/premium features like decent filters, gromits, optional mesh front panel, rgb/fan controller that sort of jazz it would still be a decent contender.
@@KitGuruTech Indeed. The modding series is a blast. James is very natural with the whole process. Goes through the same pangs as any of us would. No falsity. Pure, unadulterated PC geek emotions.
Both Leo and James are no flash, no nonsense kind of blokes who get my Ronseal of Approval. James is + for builds, Leo is + for deadpan comedy gold. What's not to like about either?
I have not had any experience of those two specific cases but from my experience of Kolink cases in the past, I would say that Deepcool has the edge over Kolink in terms of build quality at least.
If you can get one of the older Kolink models, you can get one for around £20. Used one for my mothers watercooled build, and with a little front panel mod I got a 240mm, a 120mm and a 80mm rad in it.
I had a PS4 controller and now I have a PS5 one for PC gaming. The one best thing about the PS5 controller is its USB C charging socket. Fiddling with the tiny one-way up micro USB of the PS4 was a pain.
Every KitGuru case review: removing side panel to say ,,no sound deadening material" :D I thought it's Leo's thing, but maybe James started... But I have to admit - I wouldn't want a case without sound deadening material :]
when you are reviewing a black/dark-colored stuff, casing, motherboards etc, please do it on a contrasting-colored table. i mean yeah, your table is white, but you ruin it by putting a mostly black mat. you wearing a black shirt just makes it worse. the shelves behind containing a lot of dark-colored boxes doesn't help either. might as well just review the case in the dark, honestly.
MicroATX is really interesting in my opinion. Thanks to onboard audio, LAN and even WiFi one simply doesn't need so many PCI slots anymore. As soon as there is enough space for a proper GPU and a decent CPU cooler, I'm interested.
This case also caught my sight on the web. Glad to see you checked it out en detail!
MATX motherboards are always cheaper, too. One issue I've been running into is with the proliferation of 2.5 and 3 slot GPUs depending on the board size and PCIE slot positions sometimes you wont even get the one extra slot you might need for an addon card.
Getting the 310 in white 1 day! Super excited. The magnetic panels and fan hub is UNREAL at less than $40!
After watching this video I'll never apply thermal paste the same way again
He wanted to show off his Polyfilla skills lol
@@Buffinator1988 I used to be a plasterer for a living 😆
The high airflow version of this case is the Deepcool Matrexx 40.
They just swapped out the tempered glass & front panel but the chassis is the same.
Yes, it is more or less the same, with slightly different front panel connectivity and missing the VGA support bracket. I'm not sold with the looks of the front panel on the Matrexx 40 though.
looks very much like the razer atx case which has poor front air flows but can't argue with the price
Wow. Just 3 degree difference without the front panel. That is impressive.
That black green theme looks awesome
Cracking little case for £40
What case would you take for more bucks with the same formfactor/minimalist design but maybe better quality of construction, materials...? Are there options? I can't find it here where I live
@@FelipePeixoto1991 nzxt h210
@@laylajansen7503 it doesn't fit the matx just mini itx 😕
@@FelipePeixoto1991 guys is this case good for an i7 2600 watercooled with a gammax l120 v2 , with an aorus rx 570, i will buy fans too but it will be fine right?
Three questions:
1. First time I'm seeing somebody who uses tape to put thermal paste. I like it! What type of tape did you use?
2. How were you able to estimate the size of the square of your thermal paste that would be right size for the cpu?
3. Does the tempered glass side have provisions for thumb screws at the back so it would be locked in?
Thanks in advance
its called masking tape
Is the material and build quality of this case better than montech air 100argb? Or montech air 100argb's material quality is better?
Like the 3.5 inch drive bay. Can have one 3.5 inch drive and space on top of it for cable excess. No need for more than 1 3.5 inch drive with a ssd boot drive and scratch ssd drive on the MB. Can store all long time storage on DAS or NAS. Agree-front air panel would be a great addition.
I got this case but I am wondering how are the thermals temp for the cpu if I get a 3 fan GPU
Good review! You allude to a smaller case, but this would make the installation of 280mm top and front difficult or impossible, which you say is already tight, you cannot have it both ways. If you want a small case the CoolerMaster Q300 is there but good luck with 280mm AIO installation there . Looks a pretty decent case, the odd chassis front holes is probably due to the base chassis being used in multiple cases.
True, but I would be prepared to sacrifice top AIO installation for a smaller chassis and better front airflow.
Don't get me wrong, I like the Macube 110 but feel that micro-ATX chassis of this size are a little pointless when you can get mid-tower cases that support ATX motherboards and are almost the same dimensions.
I own a Q300L and it is amazing. I use 8 fans with an 240mm AIO on a push and pull configuração. Great airflow. Superb case.
nice review. btw, what's the song at timelapse build ?
most expensive system this lil case will see, it must be the envy of it's brothers
I know they say that the GPU limit is 320mm but since the case is like 400mm long, can it fit a 324mm GPU?
Macube 110 or matrexx 40 fs3 ? which one is better deal in your opinion?
Possible to mount the fans on the front? Behind the chassis? Or just inside the chassis?
can it support Asus ROG Strix b450 - f wifi motherboard? thanks
can I put one fan on top to suck out air instead? sort of like nzxt h510
does has good airflow? want to buy this case. Someone answer if u got the case please :) Please.
Another great video and a fine looking finished build, but I hope you don't mind if I ask you a question. Why did you remove the heatsink from the MP600 and use the much smaller one supplied with the motherboard? Was it just for aesthetics or cpu cooler clearance? You're not the first CZcamsr I've seen do this which surprises me as the supplied heatsink works well (at least in my build) and, I think, looks pretty good too.
I removed the MP600 heat sink simply for aesthetic reasons. If the system was being used daily, I would probably stick with the stock Corsair heat sink. Glad you enjoyed the review.
Tipo: I use thin heat vent filters (typ precut 10"x4" and cheap) placed in front of fans.
Can you place the top magnetic dust filter in front?
Are the standoffs preinstalled or do you need to install them and also can I fit a hyper 212 cooler in here?
standoffs are pre-installed and i have a be quiet pure rock slim cooler in my mine and it fits well so it might fit your 212
I currently have a nzxt h210 which I'm thinking of replacing as I can't fit any of the new GPU's in it. They're either too thick or too long to fit with the 240 AIO I use. this is a case I'd not seen yet and seems to be not too much bigger (really trying to stay SFF'ish). I can't do the NR200/Dancase style boxes as they're too small for everything I need.
If they'd push this price up by half again or even doubled it and added some more basic/premium features like decent filters, gromits, optional mesh front panel, rgb/fan controller that sort of jazz it would still be a decent contender.
Wheres Leo? Micro atx and supressed front. Not for me! Keep up the good work!
Leo here: C'mon, James has been with KitGuru a while and has had huge traffic with his Build/Mod videos. Plus he does coolers and the occasional case.
@@KitGuruTech Indeed. The modding series is a blast. James is very natural with the whole process. Goes through the same pangs as any of us would. No falsity. Pure, unadulterated PC geek emotions.
I just prefer you, Leo, thats all. 🥰
Both Leo and James are no flash, no nonsense kind of blokes who get my Ronseal of Approval. James is + for builds, Leo is + for deadpan comedy gold. What's not to like about either?
@@BobMotster I love this comment.
The way he put the thermal paste on is criminal
How about the Air follow ?
How would you compare this case with the Kolink Citadel and Citadel Mesh?
I have not had any experience of those two specific cases but from my experience of Kolink cases in the past, I would say that Deepcool has the edge over Kolink in terms of build quality at least.
@@KitGuruJames Cheers.
If you can get one of the older Kolink models, you can get one for around £20. Used one for my mothers watercooled build, and with a little front panel mod I got a 240mm, a 120mm and a 80mm rad in it.
I respect DeepCool for their 180mm and 200mm fans. But this case... nah.
Hard to believe they can make much money from a £40 case. After boxing. Transport etc.
The front panel is made of steel, not plastic.
I dont understand the obsession with USB type c...and this coming form someone who has one?
@@fatagnus3153 😳😂
I had a PS4 controller and now I have a PS5 one for PC gaming. The one best thing about the PS5 controller is its USB C charging socket. Fiddling with the tiny one-way up micro USB of the PS4 was a pain.
Meh....
Better buying one of the cheap older Kolink cases for £20.
Better just getting a cardboard shoe box for free. save the £20. 😅
@@theonlyredspecial That's true.....
But have you seen the mess after a water spillage!?!😂
@Jux Zeil laminate the shoe box? can probably do that for £2 as money seems so tight 😀
@@KitGuruTech Yeah....
But I wouldn't want it to be a "static" feature of the room...😂
Every KitGuru case review: removing side panel to say ,,no sound deadening material" :D I thought it's Leo's thing, but maybe James started... But I have to admit - I wouldn't want a case without sound deadening material :]
when you are reviewing a black/dark-colored stuff, casing, motherboards etc, please do it on a contrasting-colored table. i mean yeah, your table is white, but you ruin it by putting a mostly black mat. you wearing a black shirt just makes it worse. the shelves behind containing a lot of dark-colored boxes doesn't help either.
might as well just review the case in the dark, honestly.
Oh look a worse cooler master nr400 😂
This is great for Americans since the nr400 doesn’t have a non odd version here