Princess Peach: Showtime! - 60 FPS | Nintendo Switch Oled
Vložit
- čas přidán 25. 03. 2024
- In this video: Princess Peach: Showtime! - 60 FPS gameplay on Nintendo Switch Oled hardware. The standard frame rate in this game is 30 with a drop in some scenes to 25. Thanks to overclocking, it was possible to get a stable 60 FPS during missions; in the lobby FPS may drop to 50; During cutscenes in which Peach's appearance changes, the frame rate is fixed at 30 frames. My overclocking settings: CPU - 1963 MHz, GPU - 998 MHz, Memory - 2131 MHz, FPSLocker is used to unlock FPS, Edizon is not used.
Want to support the channel? Just watch this video until the end, thank you and enjoy watching! - Hry
*Hi! Want to support the channel? Just watch this video until the end, thank you!*
Please nier automata😊
@@kokandskiybekk1945 overclocking?
Question can you do a simple tutorial how to run it on 60 fps handmode? I have the sys clk, do I need any patch? Or just OC and good to go
Yes, all I did at the beginning of the video is the entire guide, only sys clk and FPSLocker, there are no patches for this game yet, I didn’t use EdiZon.
@@HandheldGamingMainoh it works like that for any game? I never did something like that, but I have the sys clk + fps locker. I'm really new with the switch hacks, sorry if my question sounds stupid. I did check some fps patches on the internet so I thought it was necessary for everygame
@@chixaro In fact, the resolution patch can be downloaded using FPSLocker in the advanced settings, for example this patch is definitely needed for Zelda Totk, in other cases overclocking will be enough.
@@HandheldGamingMain i did as you have and its still locked to 30fps
@@kevinwoolford123 All you need to do is unlock the FPS in FPSLocker and increase the hardware frequency🤷♀
I have another question: why, when I launch the Princess Peach game on the TV, it runs at 30 fps, while on the portable switch, it runs at 60 fps?"
Most likely you have selected overclocking only for handheld mode, you need to set the overclocking settings for dock mode.
@@HandheldGamingMain That's what I did and it still runs at 30fps on TV
@@Eugene-GabrielSt-Amand When connecting to a TV, check FPSLocker again, maybe it resets the FPS to the standard value, and also try the "ReverseNX-Tool" plugin, which can be used to force the mode to be selected for the console.
@@HandheldGamingMain Ah ok
for me the maximum to overclock in the memory is 1996 Mhz my you 2131 how to go higher than 1996
Perhaps you need to update the overclocking module, or better yet, all at once. What version of Nintendo Switch do you have?
@@HandheldGamingMain I have 17.0.1 on my switch
@@HandheldGamingMain I have 17.0.1 on my switch and my overclocking module is 2.0.0
@@Eugene-GabrielSt-Amand Oh, I didn’t mean the Kifir version, but the revision of your console, if this is the first, then the memory overclocking rates there may be slightly lower than for consoles of the second revision.
@@HandheldGamingMain AH OK
Netx mario odnesy pls
😉
@@HandheldGamingMain yeay
Please nier automata
Isn't this 60 FPS by default?